RadioShack 100124414

RadioShack Y665 Wireless Bluetooth Speaker User Manual

Ụdị: 100124414

Okwu mmalite

This manual provides instructions for the safe and efficient use of your RadioShack Y665 Wireless Bluetooth Speaker. Please read this manual thoroughly before using the product and retain it for future reference. This compact and portable speaker features Bluetooth 5.0 connectivity, a 5W audio output, and an 800mAh rechargeable battery, offering 5 to 6 hours of continuous playback.

Ngwaahịa gafereview

Ihe ngwugwu

  • RadioShack Y665 Wireless Bluetooth Speaker
  • Igwe nchaji USB
  • 3.5mm eriri inyeaka

Njirimara akụrụngwa

N'elu view of the RadioShack Y665 Wireless Bluetooth Speaker showing control buttons.

This image displays the top panel of the speaker, highlighting the control buttons. From left to right, these include the Power button, Play/Pause button, Volume Down button, Volume Up button, and Mode (M) button.

RadioShack Y665 Wireless Bluetooth Speaker with included USB charging cable.

This image shows the speaker alongside its USB charging cable. The charging port is typically located on the side or back of the speaker.

  • Bọtịnụ ike: Pịa ma jide ka ịgbanwuo ma ọ bụ gbanyụọ ọkà okwu.
  • Bọtịnụ Kwụsị/Kwụsị: Pịa ka ịkpọọ ma ọ bụ kwụsịtụ ọdịyo.
  • Mpịakọta ọnụ (-): Pịa ka ibelata olu.
  • Elu elu (+): Pịa ka iwelie olu.
  • Bọtịnụ Ụdị (M): Press to switch between Bluetooth and Auxiliary input modes.
  • Nchaji ọdụ ụgbọ mmiri: Ọdụ USB micro maka ịchaji ọkà okwu.
  • Ntinye inyeaka: 3.5mm jack for wired audio connection.

Melite

Ịchaji Ọkà Okwu

Before first use, fully charge the speaker to ensure optimal battery performance.

  1. Jikọọ obere nsọtụ nke eriri chaja USB dị na ọdụ chaja dị na ọkà okwu.
  2. Connect the large end of the USB cable to a USB power adapter (not included) or a computer's USB port.
  3. The charging indicator light will illuminate (color may vary) during charging and turn off or change color when fully charged.
  4. Charging typically takes 2 to 3 hours.

Ịgbanyụ/ Gbanyụọ

To turn the speaker ON, press and hold the bọtịnụ ike until you hear an audible prompt or see an indicator light.

To turn the speaker OFF, press and hold the bọtịnụ ike again until you hear an audible prompt or the indicator light turns off.

Ntuziaka ọrụ

Njikọ Bluetooth

  1. Ensure the speaker is charged and powered ON. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.
  2. Na ngwaọrụ mkpanaaka gị (smartphone, tabletị, wdg), gbanye Bluetooth wee chọọ ngwaọrụ dịnụ.
  3. Select "RadioShack Y665" (or similar name) from the list of found devices.
  4. Once paired, the speaker will emit an audible confirmation, and the LED indicator will stop flashing and remain solid.
  5. Ọkà okwu ahụ ga-ejikọghachi na ngwaọrụ ikpeazụ ejikọtara ozugbo mgbe agbanyere ya, ọ bụrụ na ngwaọrụ ahụ dị n'ime oke ma gbanye Bluetooth.

Auxiliary (AUX) Mode

  1. Connect one end of the 3.5mm auxiliary cable to the AUX input port on the speaker.
  2. Connect the other end of the auxiliary cable to the headphone jack of your audio source device.
  3. Pịa Ụdị bọtịnụ (M). on the speaker to switch to AUX mode.
  4. Play audio from your connected device. Volume can be controlled via both the speaker and the source device.

Egwu Egwu

  • Gwuo/kwụsịtụ: Pịa Bọtịnụ Kwụsị/ Kwụsị to start or pause music.
  • Ndozi olu: Pịa Elu elu (+) or Olu ala (-) buttons to adjust the speaker's volume.

Nlekọta

Nhicha

  • Disconnect the speaker from all power sources before cleaning.
  • Jiri akwa dị nro ma kpọọ nkụ hichaa mpụta nke ọkà okwu.
  • Ejila ihe nchacha abrasive, waxes, ma ọ bụ ihe mgbaze.
  • Zere ịbanye mmiri n'ime oghere ọ bụla.

Nchekwa

  • Chekwaa ọkà okwu n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
  • If storing for an extended period, charge the battery periodically to maintain its lifespan.

Nchọpụta nsogbu

Okwu na ngwọta nkịtị

NsogbuNgwọta
Ọkà okwu anaghị agbanwuo.Hụ na batrị ahụ chajị. Jiri eriri USB jikọọ ọkà okwu ahụ na isi iyi ike.
Enweghị ụda.Check the volume level on both the speaker and your connected device. Ensure the speaker is in the correct mode (Bluetooth or AUX).
Enweghị ike ijikọ site na Bluetooth.Ensure the speaker is in pairing mode (flashing LED). Turn off Bluetooth on your device and turn it back on. Move the speaker closer to your device. Clear previous Bluetooth connections on your device.
Ogo ụda adịghị mma.Ensure the speaker and connected device are within Bluetooth range (10m). Check for interference from other wireless devices. Try a different audio source or cable (for AUX mode).

Nkọwapụta

Nkọwa nka nka

NjirimaraNkọwapụta
Nlereanya100124414 (Y665)
Mpụta ike5W
Ụdị Bluetooth5.0
Ikuku icheRuo mita 10 (ụkwụ 33)
Ike batrị800mAh
Oge nkwughachi5 ruo 6 awa
Oge Nchaji2 ruo 3 awa
Ike ntinye5V DC, 1a
Ugboro ugboro2400 MHz - 2483.5 MHz
AgbaNwa
UPC/GTIN793945379804
Ngwa gụnyereUSB Charging Cable, 3.5mm Auxiliary Cable

Ozi akwụkwọ ikike

This product is covered by a warranty of 1 month from the date of purchase. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to your retailer or the official RadioShack websaịtị.

Nkwado ndị ahịa

For technical assistance or further information, please visit the official RadioShack websaịtị: www.radioshack.com.mx

You may also contact customer service at: 55 2582 0999.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.