BUVAYE BN03 Car Jump Starter with Air Compressor

Okwu mmalite

The BUVAYE BN03 Car Jump Starter with Air Compressor is a versatile and essential tool for vehicle owners. Designed for 12-volt vehicles, it features a powerful 4000A peak current capable of jump-starting gasoline engines up to 10 liters and all diesel engines. Beyond jump-starting, it integrates a 150 PSI air compressor for tire inflation, an emergency power bank for charging mobile devices, and multiple LED light modes for various situations. This device is built with 10 safety protections to ensure secure operation in diverse conditions, from extreme cold to high temperatures.

Kedu ihe dị na Igbe ahụ

Upon unboxing your BUVAYE BN03, you will find the following components:

• 1 × Jump Starter with Air Compressor
• 1 × Heavy-Duty Battery Jumper Cables
• 1 × Detachable Air Hose
• 4 × Gas Nozzles (Presta to Schrader adapter, needle adapter, short tapered nozzle, long tapered nozzle)
• 1 × USB-C eriri USB
• 1 × Akwụkwọ ntuziaka
• 1 × EVA Carrying Case

Melite

Nchaji mbụ

Before first use, or if the device has been stored for an extended period, ensure the jump starter is fully charged. Connect the included USB-C charging cable to the USB-C input port on the device and plug the other end into a suitable USB power adapter (not included). The LCD display will indicate the charging status. It is recommended to keep the battery starting power above 50% for optimal performance.

Njirimara akụrụngwa

Familiarize yourself with the main components and controls of the device:

• Ike mgba ọkụ: Gbanyụọ/ gbanyụọ ngwaọrụ.
• Air Pressure + / -: Adjusts target air pressure for inflation.
• Pressure Unit Adjustment: Cycles through PSI, BAR, KPA, Kg/cm².
• LED Flashlight Switch: Activates and cycles through flashlight, SOS, and strobe modes.
• Mmepụta USB-A: Maka ịchaji ngwaọrụ mpụga.
• Ọdụ ụgbọ mmiri USB-C: For charging the jump starter.
• Smart Clip Socket: Connects the smart jumper cables.
• Inflator Hose Socket: Connects the detachable air hose.
• Ezi Clamp (Uhie): Connects to the positive (+) terminal of the battery.
• Ihe ọjọọ Clamp (Nwa): Connects to the negative (-) terminal of the battery.
• Jump Start Port: Connects to the smart jumper cables.

Ntuziaka ọrụ

Malie Malite Ụgbọala

Follow these steps to safely jump start your vehicle:

1. Nzọụkwụ 1: Insert the Smart Clip into the Jump Starter's jump start port. Ensure a secure connection.
2. Nzọụkwụ 2: Jikọọ red positive (+) clamp to the positive (+) terminal of the vehicle's dead battery. Connect the black negative (-) clamp to the negative (-) terminal of the vehicle's dead battery. The smart cables will auto-detect the connection.
3. Nzọụkwụ 3: Once the indicator light on the smart clip turns green, start your car engine.
4. Nzọụkwụ 4: After the engine starts, immediately remove the clamps from the car battery, then disconnect the smart clip from the jump starter.

Inflating Tires and Other Devices

The integrated air compressor can inflate car tires, bicycle tires, motorcycle tires, sports balls, and more.

1. Nzọụkwụ 1: Connect the air hose to the valve of the tire or device you wish to inflate. Ensure it is securely screwed on.
2. Nzọụkwụ 2: Press and hold the power button (often indicated by a "M" or similar icon) for 2 seconds to turn on the device. The LCD display will show the current pressure.
3. Nzọụkwụ 3: Long press the "O" button to switch between inflation modes (car, motorcycle, bicycle, ball). Short press the "O" button to select the desired pressure unit (PSI, BAR, KPA, Kg/cm²).
4. Nzọụkwụ 4: Press the "+" and "-" buttons to preset the desired pressure value.
5. Nzọụkwụ 5: Press the power button (often indicated by a "M" or similar icon) again to start the inflation pump. The pump will automatically stop once the preset pressure is reached.

Iji dị ka Power Bank

The BUVAYE BN03 can serve as a portable power bank to charge your electronic devices.

• Connect your device's charging cable to the USB-A output port on the jump starter.
• Ihe mmalite mbuli elu ga-amalite ịchaji ngwaọrụ gị na akpaghị aka.

Iji ọkụ LED

The built-in LED light offers three modes for various emergency or outdoor situations.

• Press the LED flashlight switch button once for constant illumination (Flashlight mode).
• Press it again to activate the SOS signal mode.
• Press it a third time for Strobe mode.
• Press it a fourth time to turn off the light.

Nlekọta

• Ịchaji mgbe niile: To maintain battery health and ensure readiness, charge the jump starter every two months, especially if not used for a long time.
• Njikwa okpomọkụ: If the product becomes very hot during use (e.g., during prolonged tire inflation), allow it to cool down for at least 10 minutes before continuing operation.
• Nchekwa: Store the device in a cool, dry place. Avoid leaving it in extreme temperatures (very hot or very cold environments) for extended periods, as this can negatively impact the lithium battery's lifespan and performance.
• Nhicha: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive cleaners.

Nchọpụta nsogbu

Nkọwapụta

Akwụkwọ ikike na nkwado

BUVAYE offers a 1-year product quality maintenance oge na nkwado teknụzụ ndụ oge niile for the BN03 Car Jump Starter. For any questions, concerns, or technical assistance, please feel free to contact BUVAYE customer support. Refer to the contact information provided in the product packaging or on the official BUVAYE websaịtị.