Vetroo AL800 Mid Tower ATX PC Computer Case

Okwu mmalite

This manual provides detailed instructions for the assembly, operation, and maintenance of your Vetroo AL800 Mid Tower ATX PC Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

Figure 1: Vetroo AL800 Mid Tower ATX PC Computer Case (Black)

Ozi nchekwa

• Kwụpụ mgbe ọ bụla ọkụ na-esi na mgbidi mgbidi tupu ịwụnye ma ọ bụ wepụ ihe ọ bụla.
• Handle components with care to avoid damage from electrostatic discharge. Consider using an anti-static wrist strap.
• Keep the case and components away from liquids and excessive humidity.
• Gbaa mbọ hụ na ikuku ikuku dị mma iji gbochie ikpo oke ọkụ.
• Agbalịla ịgbanwe ihe mkpuchi ahụ ma ọ bụ akụkụ ya, n'ihi na nke a nwere ike imebi akwụkwọ ikike gị ma weta ihe egwu nchekwa.

Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu:

• Vetroo AL800 Mid Tower ATX PC Computer Case
• Accessory Box (screws, standoffs, cable ties)
• Pre-installed 1x 120mm PWM/ARGB Fan (rear)
• Akwụkwọ ntuziaka (akwụkwọ a)

Atụmatụ igodo

• ARGB LED Strip: Integrated LED lighting and ARGB case fans can be synchronized with compatible motherboards via a 5V 3-pin interface.
• Door Opening Design: Features a 4mm thick tempered glass side panel with a convenient door-opening mechanism for easy access to internal components.
• High Performance Airflow: A mesh front panel and strategically placed dust filters ensure optimal airflow and system cooling.
• Ndakọrịta sara mbara: Na-akwado motherboards ATX, M-ATX, na ITX. Na-anabata GPU ruo 340mm n'ogologo na CPU coolers ruo 165mm n'ogologo.
• Nkwado mmiri oyi: Front panel supports up to a 360mm liquid cooling radiator.
• Nkwado ndị fan: Na-akwado ruo 8 x 120mm fans.
• Ijikwa eriri USB dị mfe: Includes two soft silicone cord grommets for organized cable routing.
• Powerful I/O Panel: Features 1x USB 3.2 Type-C port, 2x USB 3.0 ports, and a combined microphone/headphone jack.

Ntọala na nwụnye

1. Nkwadebe n'ozuzu

• Debe akpa ahụ n'elu ebe dị larịị ma kwụsie ike.
• Open the tempered glass side panel by gently pulling it open. It is hinged for easy access.
• Remove the tempered glass panel if necessary for easier installation by lifting it off its hinges once open.

Figure 2: Tempered Glass Door Opening Design

2. Nwụnye motherboard

• Install the I/O shield (if applicable) into the rear opening of the case.
• Align your ATX, M-ATX, or ITX motherboard with the pre-installed standoffs.
• Secure the motherboard using the provided screws from the accessory box.

Figure 3: Motherboard and Component Clearance (Max CPU Cooler Height 165mm, Max GPU Length 340mm)

3. Storage Device Installation (HDD/SSD)

• Locate the dedicated mounting points for SSDs and HDDs.
• Install 2.5" SSDs onto the SSD trays or mounting brackets.
• Install 3.5" HDDs into the drive cage located at the bottom of the case.
• Secure all drives with the appropriate screws.

Figure 4: Internal Layout with Drive Bay Locations (SSD, HDD, Power Supply)

4. Nwụnye ọkụ ọkụ

• Mount your power supply unit (PSU) in the dedicated compartment at the bottom rear of the case.
• Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference.
• Secure the PSU with screws from the rear of the case. The case supports PSUs up to 200mm in length.

5. Nwụnye Kaadị Mgbasawanye (GPU)

• Wepụ mkpuchi oghere PCI-E dị mkpa n'azụ akpa ahụ.
• Insert your graphics card or other expansion cards into the motherboard's PCI-E slots.
• Secure the cards with screws. The case supports GPUs up to 340mm in length.

6. Cooling System Installation (Fans/Radiators)

• The case comes with one pre-installed 120mm PWM/ARGB fan at the rear.
• Additional fans (120mm or 140mm) can be installed at the front, top, and bottom.
• Liquid cooling radiators up to 360mm can be installed at the front, and up to 240mm at the top.
• Refer to the diagram for supported fan and radiator configurations.

Figure 5: Fan and Liquid Radiator Support Diagram

7. Njikọ ihu panel

• Connect the front panel cables (Power, Reset, USB 3.0, USB Type-C, HD Audio) to the corresponding headers on your motherboard.
• Consult your motherboard manual for the exact pin layout of these headers.

Figure 6: Top I/O Panel Connections

8. ARGB and PWM Connections

• The pre-installed fan and ARGB LED strip require connection to your motherboard.
• Connect the 4-pin PWM connector from the fan to a compatible fan header on your motherboard for speed control.
• Connect the 3-pin ARGB connector from the fan and LED strip to a 5V 3-pin ARGB header on your motherboard for lighting synchronization. Do not connect to a 12V RGB header, as this will damage the LEDs.

Figure 7: PWM and ARGB Connector Details

9. Njikwa USB

• Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables.
• The soft silicone grommets help protect cables and provide a clean look.
• Proper cable management improves airflow and aesthetics.

Ọrụ

1. Gbanwee ike mbụ

• After all components are securely installed and cables connected, close the tempered glass side panel.
• Connect your monitor, keyboard, mouse, and power cable to the PC.
• Flip the power switch on your PSU to the 'ON' position.
• Press the power button on the top I/O panel of the case to start your system.

2. Njikwa ọkụ ARGB

• If connected to a compatible motherboard's 5V 3-pin ARGB header, the lighting of the pre-installed fan and LED strip can be controlled via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
• Refer to your motherboard's manual for specific instructions on using its ARGB control software.

3. Airflow Management

• The mesh front panel is designed for optimal air intake.
• Ensure that intake fans (typically front and bottom) and exhaust fans (typically rear and top) are configured to create positive or neutral air pressure for efficient cooling and dust prevention.

Figure 8: Airflow Diagram with Dust Filters

Nlekọta

1. Nchacha uzuzu uzuzu

• The case is equipped with dust filters on the top and bottom panels.
• Regularly check and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
• Gently remove the magnetic dust filters and clean them with compressed air or by rinsing with water (ensure they are completely dry before re-installation).

2. Tempered Glass Panel Care

• Clean the tempered glass panel with a soft, lint-free cloth and a non-abrasive glass cleaner.
• Avoid harsh chemicals or abrasive materials that could scratch or damage the glass.

Nchọpụta nsogbu

• Sistemụ anaghị agba ọkụ:
  • Gbaa mbọ hụ na ejikọrọ eriri ọkụ ahụ na PSU na oghere mgbidi.
  • Hụ na mgbanwe PSU dị n'ọnọdụ 'ON'.
  • Lelee na eriri bọtịnụ ike ihu panel jikọọ nke ọma na nkụnye eji isi mee motherboard.
  • Confirm all power cables (24-pin ATX, CPU, GPU) are properly seated in the motherboard and components.
• Ndị Fans Anaghị Agbagharị / ARGB Anaghị Agbagharị:
  • Check that the fan's PWM connector is securely plugged into a motherboard fan header.
  • Verify the ARGB 3-pin connector is correctly attached to a 5V 3-pin ARGB header on the motherboard (not 12V RGB).
  • Ensure your motherboard's ARGB software is installed and configured correctly.
• Ọdụ ụgbọ mmiri USB anaghị arụ ọrụ:
  • Confirm the USB 3.0 and USB Type-C front panel cables are correctly connected to their respective motherboard headers.
  • Check your motherboard manual for correct header locations.
• For other component-specific issues, refer to the instruction manuals for your motherboard, CPU, GPU, and other installed hardware.

Nkọwapụta

Akwụkwọ ikike na nkwado

For warranty information, technical support, or to inquire about replacement parts, please visit the official Vetroo websaịtị ma ọ bụ kpọtụrụ ndị ahịa ha ozugbo. Debe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.

Official Vetroo Store: Vetroo Amazon Store