MANHATTAN Ultra Slim Rigid TV Wall Mount (Model 461917) Instruction Manual

1. Okwu mmalite

This manual provides detailed instructions for the safe and proper installation and use of your MANHATTAN Ultra Slim Rigid TV Wall Mount, Model 461917. This fixed wall mount is designed to securely hold large flat and curved screen televisions ranging from 60 to 120 inches, with a maximum load capacity of 120 kg (264 lbs). Please read all instructions carefully before installation to ensure optimal performance and safety.

2. Ozi nchekwa

• Ike ibu: Do not exceed the maximum load capacity of 120 kg (264 lbs). Exceeding this limit may result in serious injury or property damage.
• Nha ihuenyo: This mount is suitable for TVs between 60 and 120 inches.
• Nhazi Mgbidi: Ensure the mounting surface (wall) can safely support the combined weight of the mount and your television. Wood studs, solid concrete, or concrete block walls are recommended. Do not install on drywall alone.
• Nwụnye ọkachamara: If you are unsure about the installation process or the suitability of your wall, consult a qualified professional installer.
• Ngwa: Use appropriate tools for installation. Always wear safety glasses.
• Ụmụaka: Debe ụmụaka pụọ ​​na mpaghara ntinye.

3. Ihe ngwugwu

Nyochaa na akụrụngwa niile dị na emebighị ya tupu ịmalite nrụnye.

• Efere mgbidi (1)
• Mpempe igwe onyonyo (2)
• Hardware Kit (screws, washers, spacers, anchors)
• Clip-on Spirit Level (1)

Nyocha 1: N'eluview of the MANHATTAN Ultra Slim Rigid TV Wall Mount components, including the wall plate and two TV brackets.

4. Nkọwapụta

Figure 2: Illustration of VESA compatibility, showing the range from 50x50 to 900x600.

Figure 3: Detailed technical drawing displaying the dimensions of the wall mount.

5. Ntọala na nwụnye

5.1. Ngwaọrụ achọrọ (anaghị etinye ya)

• Pensụl
• Kwuo egwu
• Onye nchọta nchọta
• Ihe teepu
• Mgbawa Socket ma ọ bụ Mgbawa A Na-agbanwe Agbanwe
• Phillips Isi Ihe Nleghari

5.2. Attaching TV Brackets to the TV

1. Jiri nlezianya tinye TV gị n'elu ebe dị nro ma dị ọcha iji gbochie mmebi ihuenyo.
2. Chọpụta oghere VESA na-agbago n'azụ TV gị.
3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern.
4. Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are centered and securely fastened. The pull straps should hang freely below the TV.

Ọgụgụ 4: nso nso view of the quick-release spring lock mechanism on the TV bracket, designed for easy installation and removal.

5.3. Mounting the Wall Plate to the Wall

1. Determine the desired height for your TV. Mark the center point on the wall.
2. Use a stud finder to locate at least two adjacent wood studs. Mark their centers. For concrete walls, ensure you use appropriate concrete anchors (included).
3. Position the wall plate against the wall, aligning its mounting holes with the marked stud centers. Use the included clip-on spirit level to ensure the wall plate is perfectly horizontal.
4. Mark the drilling points through the wall plate holes.
5. Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the chosen lag bolts/anchors.
6. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten all bolts firmly, but do not overtighten.

Figure 5: The included clip-on spirit level helps ensure precise horizontal alignment during wall plate installation.

5.4. Hanging the TV

1. With assistance, carefully lift the TV (with brackets attached) and align the TV brackets with the wall plate.
2. Kpọnye ihe nkwado TV ahụ n'elu elu nke efere mgbidi ahụ.
3. Gently lower the TV until the quick-release spring locks engage, securing the TV to the wall plate. You should hear an audible click.
4. Pull the release straps to ensure the locks are engaged and the TV is securely mounted.

Ọgụgụ 6: Example of a television securely mounted to the wall using the MANHATTAN Ultra Slim Rigid TV Wall Mount.

6. Ọrụ

Once installed, the MANHATTAN Ultra Slim Rigid TV Wall Mount provides a fixed, low-profile position for your television. To remove the TV from the wall mount:

1. Locate the pull straps hanging below the TV.
2. Pull both straps downwards simultaneously to disengage the quick-release spring locks.
3. With assistance, carefully lift the TV off the wall plate.

7. Nlekọta

• Nhicha: Jiri ákwà dị nro ma kpọọ nkụ hichaa ebe a na-etinye ihe n'elu ya. Zere ihe nhicha ma ọ bụ ihe mgbaze.
• Nlele oge: Na-elele skru na boltị niile mgbe niile iji hụ na ha siri ike ma dịkwa nchebe.
• Mmebi: If any part of the mount appears damaged or worn, do not use it. Contact customer support for assistance.

8. Nchọpụta nsogbu

• Ọ bụghị ọkwa TV: Ensure the wall plate was installed horizontally using the spirit level. If not, remove the TV, adjust the wall plate, and re-mount.
• TV Not Engaging Locks: Ensure the TV brackets are correctly aligned with the wall plate and that no cables are obstructing the locking mechanism. Pull the straps to confirm engagement.
• Ugwu ahụ Na-eche na Ọ Na-adịghị Mma: Immediately remove the TV. Re-check all wall plate fasteners and ensure they are securely anchored into studs or appropriate concrete. Do not re-mount the TV until stability is confirmed.

9. Akwụkwọ ikike na nkwado

This MANHATTAN product is covered by a Manufacturer Guarantee. For specific warranty terms, conditions, and duration, please refer to the documentation included with your purchase or visit the official MANHATTAN website. For technical support or assistance with installation, please contact MANHATTAN customer service.

MANHATTAN Customer Support: Please refer to your product packaging or the MANHATTAN websaịtị maka ozi kọntaktị ugbu a.