BUVAYE BN03 Portable Car Jump Starter with Air Compressor and LED Light User Manual

Okwu mmalite

The BUVAYE BN03 is a multi-functional device designed for automotive emergencies. It combines a powerful car jump starter, a tire inflator, a portable power bank, and an LED flashlight. This manual provides detailed instructions for safe and effective use of the device.

Njirimara ngwaahịa

• Mmalite Mwụli na-arụ ọrụ dị elu: Delivers 2500A peak current, capable of starting vehicles with up to 5L diesel or 8L gas engines.
• Amamihe Clamp Nchedo: Features 10 integrated safety protections including anti-spark, reverse polarity, overcurrent, short-circuit, overcharge, over-discharge, high-temperature, low-temperature, reverse connection, and overload protection.
• Fast Tire Inflator: Equipped with a 22-cylinder turbo motor, providing an airflow of 35 liters per minute. Supports real-time tire pressure detection, automatic shut-off at preset values, and unit switching. Can inflate 195/65/R15 tires from 0 to 35 PSI in approximately 5 minutes.
• Ọrụ ebe nchekwa: Retains the last set inflation mode and air pressure value for convenience.
• Ụlọ akụ ọkụ nwere ike ibugharị: Functions as a mobile power source for charging electronic devices.
• Igwe ọkụ ọkụ LED: Integrated LED light for emergency illumination.

Ihe ngwugwu

Biko lelee ngwungwu maka ihe ndị a:

• BUVAYE BN03 Jump Starter with Air Compressor x1
• Smart Jump Starter Clampnke x1
• Inflatable Hose x1
• Nozzle Adapters x4
• USB-C eriri USB x1
• Accessory Storage Bag x1
• Akwụkwọ ntuziaka onye ọrụ x1

Ntuziaka nchekwa

Gụọ ịdọ aka ná ntị na ntuziaka nchekwa niile tupu i jiri ngwaahịa a. Ọ bụrụ na ị gbasoghị ịdọ aka ná ntị na ntuziaka ndị a, ọ nwere ike ibute mgbawa eletriki, ọkụ, na/ma ọ bụ mmerụ ahụ dị njọ.

• Awụlila-malite batrị oyi kpọnwụrụ.
• Ensure proper polarity connection (red clamp na nti, nwa clamp na-adịghị mma).
• Ejikọtala ihe dị mma na nke na-adịghị mma clamps ọnụ.
• Debe ngwaọrụ ahụ n'ebe ụmụaka nọ.
• Ewepụla ngwaọrụ ahụ na mmiri ozuzo ma ọ bụ ọnọdụ mmiri.
• Ekwula ngwa ahụ. Nye ndị ọrụ ruru eru ọrụ niile.
• Jiri naanị eriri chaja na ngwa ndị enyere.
• Avoid prolonged inflation to prevent overheating. Allow 10 minutes of cooling time after each inflation cycle.

Ihe karịrịview

Foto: Diagram showing the components and features of the BUVAYE BN03 device.

This image illustrates the various parts of the BUVAYE BN03, including the power switch, air pressure controls, pressure unit adjustment, smart clip socket, inflator hose socket, USB-A output, USB-C input port, LED flashlight switch, positive clamp (red), negative clamp (black), and jump start port.

• Ike mgba ọkụ: Gbanyụọ/ gbanyụọ ngwaọrụ.
• Air Pressure +/-: Adjusts the target air pressure for inflation.
• Pressure Unit Adjustment: Cycles through pressure units (PSI, KPA, BAR, KG/CM²).
• Smart Clip Socket: Port for connecting the smart jump starter clamps.
• Inflator Hose Socket: Port for connecting the air inflator hose.
• Mmepụta USB-A: Maka ịchaji ngwaọrụ mpụga.
• Ọdụ ụgbọ mmiri USB-C: For charging the BUVAYE BN03 device.
• LED Flashlight Switch: Activates the LED light.
• Ezi Clamp (Uhie): Connects to the positive terminal of the car battery.
• Ihe ọjọọ Clamp (Nwa): Connects to the negative terminal of the car battery.
• Jump Start Port: Connects the smart clamps to the main unit.

Nhazi na Nchaji

Ịchaji ngwaọrụ

Before first use, fully charge the BUVAYE BN03. Connect the provided USB-C charging cable to the USB-C input port on the device and to a suitable USB power adapter (not included). The display will indicate the charging status. A full charge is recommended for optimal performance.

Nyocha mbụ

Inspect the device and all accessories for any damage before use. Do not use if any components are damaged.

Ntuziaka ọrụ

1. Malie Malite Ụgbọala

Foto: A person connecting the jump starter clamps na batrị ụgbọ ala.

This image demonstrates the process of connecting the BUVAYE BN03 jump starter to a vehicle's battery terminals, showing the red clamp on the positive terminal and the black clamp on the negative terminal.

1. Ensure the BUVAYE BN03 is sufficiently charged.
2. Gbanyụọ ọkụ ụgbọala ahụ na ihe niile dị mkpa.
3. Connect the smart jump starter clamps to the jump start port on the BUVAYE BN03.
4. Jikọọ red (positive) clamp ka positive (+) terminal of the vehicle's battery.
5. Jikọọ black (negative) clamp ka adịghị mma (-) ọnụ of the vehicle's battery.
6. Gbaa mbọ hụ na clamps are securely attached and the indicator light on the smart clamp is green. If it's red or flashing, check connections and battery status.
7. Bido injin ụgbọ ala.
8. Once the engine starts, immediately remove the smart clamps from the vehicle battery, first the negative (black) clamp, then the positive (red) clamp.
9. Disconnect the smart clamps from the BUVAYE BN03.

Mara: If the vehicle does not start after 3 attempts, allow the jump starter to cool down for a few minutes before trying again. Consult your vehicle's manual for specific jump-starting procedures.

2. Inflating Tires

Foto: The BUVAYE BN03 connected to a car tire for inflation.

This image shows the BUVAYE BN03 device with its inflator hose connected to a car tire valve, demonstrating the tire inflation function.

1. Connect the inflator hose to the inflator hose socket on the BUVAYE BN03.
2. Attach the other end of the inflator hose to the tire valve. Ensure a secure connection to prevent air leakage.
3. Turn on the BUVAYE BN03. The display will show the current tire pressure.
4. Use the "Air Pressure +/-" buttons to set the desired target pressure. Press the "Pressure Unit Adjustment" button to cycle through units (PSI, KPA, BAR, KG/CM²).
5. Press the start button (often the power button or a dedicated inflation button) to begin inflation.
6. Ngwaọrụ ahụ ga-akwụsị ozugbo mgbe arụrụ arụrụ arụrụ arụrụ.
7. Disconnect the inflator hose from the tire valve and then from the BUVAYE BN03.

Ọrụ ebe nchekwa: After powering on, press "+" or "-" to recall the last set inflation mode and pressure value.

Mara: For continuous inflation, allow the device to cool down for 10 minutes after each inflation cycle to prevent overheating.

3. Iji dị ka Power Bank

Foto: The BUVAYE BN03 connected to a smartphone for charging.

This image shows the BUVAYE BN03 being used as a portable power bank, with a USB cable connecting it to a smartphone that is actively charging.

Connect your electronic device's USB charging cable to the USB-A output port on the BUVAYE BN03. The device will automatically begin charging your connected device.

4. Iji ọkụ ọkụ LED

Press the LED Flashlight Switch to cycle through different light modes: steady on, strobe, and SOS. Press again to turn off the light.

Nlekọta

• Nhicha: Jiri akwa dị nro hichaa ngwaọrụ ahụ. Ejila kemịkalụ siri ike ma ọ bụ ihe mkpocha abrasive.
• Nchekwa: Chekwaa ngwaọrụ ahụ n'ebe dị jụụ, kpọrọ nkụ, pụọ na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
• Ịchaji: Recharge the device every 3-6 months, even if not in use, to maintain battery health.
• Mkpofu batrị: Dispose of the lithium-ion battery according to local regulations. Do not dispose of in household waste.

Nchọpụta nsogbu

Nkọwapụta

Foto: Visual representation of the jump starter's capacity for gas and diesel engines.

This image highlights the BUVAYE BN03's capability to jump start vehicles with up to 8.5L gas engines and 6L diesel engines, with a peak current of 2500A.

Foto: Icons illustrating the 10 safety protection features.

This image displays the comprehensive 10 protection features of the BUVAYE BN03, including reverse polarity, over current, over voltage, over charge, over-discharge, high-temp, low-temp, reverse connection, overload, and short circuit protection.

Akwụkwọ ikike na nkwado

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BUVAYE websaịtị. Debe nnata nzụta gị ka ihe akaebe nke ịzụrụ.