AsperX AX260 3000A Mmalite Mmalite site na iji Akwụkwọ ntuziaka Onye Ọrụ Compressor Ikuku

1. Ozi nchekwa

Gụọ ịdọ aka ná ntị nchekwa niile, ntuziaka, nkọwa na nkọwapụta enyere na ngwaahịa a. Ọdịda ịgbaso ntuziaka niile edepụtara n'okpuru nwere ike bute ujo ọkụ eletrik, ọkụ na/ma ọ bụ mmerụ ahụ dị egwu.

• Yiri nchedo anya mgbe niile mgbe ị na-arụ ọrụ na batrị.
• Ejila ihe mmalite jump starter rụọ ọrụ ma ọ bụrụ na ọ mebiri emebi.
• Keep the jump starter away from children.
• Ewepụla ngwaahịa a na mmiri ozuzo ma ọ bụ ọnọdụ mmiri.
• Ensure proper polarity connection (red to positive, black to negative) to avoid sparks or damage.
• Do not use the air compressor continuously for extended periods to prevent overheating. Allow it to cool down between uses.
• Chekwaa ngwaọrụ ahụ n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem.

2. Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu gị:

• 1 x AsperX AX260 Jump Starter with Air Compressor
• 1 x Smart jumper USB
• 1 x USB-A na eriri USB-C
• 1 x Akpa na-ebu
• 1 x Pump Tube
• 3 x Nozzles ikuku
• 1 x Akwụkwọ ntuziaka onye ọrụ

3. Ngwaahịa gafereview

The AsperX AX260 is a versatile device combining a powerful jump starter, an air compressor, a power bank, and an LED flashlight. It features a 3.4-inch LCD display for easy operation and monitoring.

Atụmatụ gụnyere:

• 3000A Peak Current: Capable of starting 12V vehicles with up to 10L Gas and 8.0L Diesel engines.
• 150 PSI Air Compressor: Features tire pressure detection and adjustable inflation modes (PSI, BAR, KPA).
• Advanced Battery Protection System: Over 10 types of safety protections for secure operation.
• 400-Lumen LED Light: Offers constant lighting, flash, and SOS modes.
• Ọrụ Bank Power: USB-A output and USB-C input for charging electronic devices.

4. Nhazi

Before initial use, fully charge the AsperX AX260 jump starter. Use the provided USB-A to USB-C cable to charge the device. The LCD display will indicate the charging status.

5. Ntuziaka ọrụ

5.1. Malie Malite Ụgbọala

The AX260 can jump start 12V vehicles with up to 10L gas or 8.0L diesel engines.

1. Insert the smart jumper cable into the 12V auto start connector port on the AX260 jump starter.
2. Jikọọ uhie clamp gaa na njedebe (+) dị mma nke batrị ụgbọ ala yana cl ojiiamp gaa na njedebe (-) adịghị mma.
3. Ensure the connections are secure. The LCD display on the jump starter will indicate correct operation. If the car battery voltage is below 0V, press the 'BOOST' button on the jump starter.
4. Start your car engine immediately.
5. Once the engine starts, remove the jumper cables from the vehicle battery, then from the jump starter.

5.2. Iji ikuku Compressor

The AX260's air compressor supports 3 optional units (PSI, BAR, KPA) and features automatic inflation stop.

1. Connect the pump tube to the air inflation opening on the AX260.
2. Attach the appropriate air nozzle to the pump tube and secure it to the item you wish to inflate (e.g., tire valve).
3. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball).
4. Jiri bọtịnụ '+' na '-' ka ịtọ nrụgide ebumnuche.
5. Long press the 'OK' button to start inflation. The device will automatically stop once the set pressure is reached.

5.3. Power Bank Functionality

The AX260 can charge various electronic devices via its USB ports.

• Connect your device's charging cable to the USB-A output port on the AX260.
• Ngwaọrụ ga-amalite chajị na-akpaghị aka.

5.4. Ọkụ ọkụ ọkụ

The 400-lumen LED light offers multiple modes for different situations.

• Pịa lamp switch button to cycle through the modes: constant lighting, flash, and SOS.
• Jide lamp switch button to turn off the light.

6. Nlekọta

• Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.
• Jiri akwa kpọrọ nkụ dị nro hichaa ngwaọrụ ahụ. Ejila kemịkalụ siri ike ma ọ bụ ihe abrasive.
• Chekwaa n'ebe dị jụụ, kpọrọ nkụ. Zere oke okpomọkụ.

7. Nchọpụta nsogbu

• Ngwaọrụ anaghị agbanwu: Ensure the device is charged. If fully charged and still not turning on, contact customer support.
• Ụgbọ ala anaghị amalite: Check that the jumper cables are correctly connected to the battery terminals. Ensure the jump starter has sufficient charge. If the battery is deeply discharged (below 0V), use the 'BOOST' function.
• Compressor ikuku anaghị agba ọkụ: Verify the pump tube and air nozzle are securely attached. Check that the desired pressure is set and the 'OK' button is long-pressed to start. Ensure the device has sufficient charge.
• Air compressor overheating: If the air compressor becomes hot during use, allow it to cool down for several minutes before resuming operation. Continuous use for very long periods can cause overheating.
• Incorrect tire pressure reading: Ensure the air nozzle is properly sealed to the tire valve.

8. Nkọwapụta

9. Official Product Videos

The following videos provide additional information and demonstrations of the AsperX AX260 Jump Starter with Air Compressor:

10. Akwụkwọ ikike na nkwado

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official AsperX websaịtị. Debe akwụkwọ nnata ịzụrụ maka akwụkwọ ikike.