Bietrun WXM02 Wireless Microphone System with Mic Stand

1. Okwu mmalite

Thank you for choosing the Bietrun WXM02 Wireless Microphone System with Mic Stand. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new microphone system. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

2. Ihe ngwugwu

Biko lelee ngwungwu ka ị hụ na ihe niile dị:

• 2 x Bietrun WXM02 Handheld Wireless Microphones
• 1 x Wireless Receiver (6.35mm Jack)
• 1 x Microphone Stand with Boom Arm
• 2 x Universal Microphone Clips
• 1 x Carrying Bag for Mic Stand
• 2 x Clip-na USB jide

3. Akụrụngwa Ngwaahịa

• Extendable & Detachable Boom Arm: The boom arm can be rotated 360 degrees for precise microphone positioning. It can also be removed to convert the stand into a traditional straight microphone stand.
• Enwere ike idozi ịdị elu: The microphone stand's height can be adjusted from 28 inches (71 cm) to 89 inches (226 cm), accommodating various users and settings.
• Enwere ike ibugharị: All components of the mic stand can be stored in the included carrying bag for easy transport and space-saving storage.
• Universal Mic Clips: The system includes two styles of microphone clip holders, compatible with most microphones on the market. Two clip-on cable holders are also provided for cable management.
• Ebe Stable Tripod: Constructed from metal tubing with a stable tripod base and non-slip foot covers, ensuring stability during use.
• Long-Distance Wireless Signal: Offers a wireless range of up to 160 feet (approximately 48 meters) using the US FCC Standard Frequency Band.
• High-Quality Microphones: Features metal cardioid handheld microphones with steel meshed heads and high-quality capsules for clear audio capture.
• Njikwa ike dị mma: Microphones use 2 AA batteries (not included). The receiver has a built-in 720mAh lithium battery, providing approximately 4.5 hours of working time after a 3-hour charge.
• Ọrụ nkwụnye na Play: Designed for ease of use, requiring no complex pairing. Simply plug the receiver into a 6.35mm MIC input and power on.
• Ndakọrịta sara mbara: Compatible with devices featuring a 6.35mm (1/4 inch) jack port, such as PA systems, power amplifiers, mixers, and karaoke speakers.

4. Nhazi ntuziaka

4.1 Microphone Stand Assembly

1. Unfold the tripod base of the microphone stand on a stable, flat surface.
2. Insert the main pole into the base and secure it using the adjustment knob.
3. Attach the boom arm to the main pole if desired, or directly attach a microphone clip for a straight stand configuration.
4. Adjust the height and boom arm angle using the respective adjustment knobs.

Foto 1: Microphone stand showing adjustable height from 25.2 inches (lowest) to 89 inches (highest) and an adjustable knob for securing positions.

Foto 2: Illustration of removing the boom arm and installing a microphone clip to convert the stand into a traditional straight microphone stand.

4.2 Microphone and Receiver Preparation

1. Microphone Battery Installation: Unscrew the bottom part of each microphone. Insert 2 AA batteries (not included) into each microphone, ensuring correct polarity.
2. Ịchaji onye nnata: Ensure the wireless receiver is fully charged. Connect it to a USB power source using a standard USB charging cable (not included) if needed. A full charge takes approximately 3 hours.
3. Onye nnata njikọ: Plug the 6.35mm jack of the wireless receiver directly into the MIC input port of your compatible audio device (e.g., PA system, ampihe na-eme ka ihe dị nro, ihe na-agwakọta).

Foto 3: Diagram illustrating the installation of 2 AA batteries into the microphone and the rechargeable receiver with its working and charging times.

Foto 4: Visual guide indicating that the receiver is only compatible with equipment featuring a 6.35mm (1/4 inch) input jack, showing examples like outdoor speakers, PA systems, and car audio systems.

5. Ntuziaka ọrụ

5.1 Gbanyụọ/ gbanyụọ

• Igwe okwu: Press and hold the power button on the microphone to turn it on or off. The display will illuminate when powered on.
• onye nnata: The receiver typically powers on automatically when plugged into a powered 6.35mm jack. Ensure your audio device is on.

5.2 Njikwa olu

The microphone features a volume control. Press the switch on the microphone to adjust the volume level (levels 8-1).

5.3 Frequency Adjustment

To prevent interference, you can change the frequency band of the microphone. Click the button located inside the battery compartment (after unscrewing the bottom part) to cycle through available frequencies. Up to 15 microphones can be used in the same environment by setting them to different frequencies.

Foto 5: Zuru ezu view of the microphone's volume control switch and the frequency change button located within the battery compartment.

5.4 Using the Microphone Stand

• Attach your microphone to one of the provided universal microphone clips.
• Secure the microphone clip onto the stand's boom arm or directly onto the main pole.
• Adjust the stand's height and boom arm position to your desired configuration for optimal sound capture.
• Use the clip-on cable holders to manage microphone cables neatly along the stand.

Foto 6: Examples of wired, wireless, and condenser microphones fitting the universal mic clips, which accommodate diameters from 0.6 to 1.7 inches.

6. Nlekọta

• Nhicha: Wipe the microphones and stand with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Nchekwa: When not in use, store the microphone system and stand in the provided carrying bag in a cool, dry place away from direct sunlight and extreme temperatures.
• Nlekọta batrị: Remove AA batteries from the microphones if they will not be used for an extended period to prevent leakage.
• Batrị nnata: Recharge the receiver periodically if stored for long durations to maintain battery health.

7. Nchọpụta nsogbu

• Enweghị mpụta ụda:
  • Ensure microphones are powered on and have fresh batteries.
  • Verify the receiver is properly plugged into the 6.35mm MIC input of your audio device.
  • Check if the receiver is charged and powered on.
  • Confirm the volume on the microphone and your audio device is turned up.
  • Ensure the audio device's input is set to the correct channel for the microphone.
• Interference/Poor Sound Quality:
  • Change the frequency band of the microphone (refer to Section 5.3).
  • Ensure there are no obstructions between the microphone and the receiver.
  • Move away from other wireless devices or sources of electromagnetic interference.
  • Check the microphone's battery level; low batteries can affect signal quality.
• Microphone Stand Instability:
  • Ensure the tripod legs are fully extended and locked.
  • Tighten all adjustment knobs securely.
  • Tinye ihe nkwụnye n'elu larịị ma kwụsie ike.

8. Nkọwapụta