Phanteks Revolt 1200W 80PLUS Platinum ATX 3.0 PCIe 5.0 Power Supply Unit Instruction Manual

1. Okwu mmalite

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Phanteks Revolt 1200W 80PLUS Platinum Power Supply Unit. Please read this manual thoroughly before installation and retain it for future reference.

The Phanteks Revolt series power supplies are designed for high performance, offering full support for Intel ATX 3.0 specifications and PCIe 5.0, with 80 Plus Platinum efficiency. This unit is sold without cables, allowing users to select custom modular cables (e.g., from CableMod) to suit their specific system requirements.

2. Ozi nchekwa

Ịdọ aka ná ntị: Improper installation or use can lead to equipment damage, electric shock, or serious injury. Always follow these safety guidelines:

• Gbaa mbọ hụ na a kwụsịrị inye ọkụ na ebe ọkụ AC tupu echichi, iwepụ, ma ọ bụ mmezi ọ bụla.
• This power supply is designed for use in computer systems only. Do not use it for any other purpose.
• Emeghela unit ọkọnọ ọkụ. Akwa voltages dị n'ime, ọ dịghịkwa akụkụ ọ bụla a ga-eji rụọ ọrụ. Imepe ngwaọrụ ahụ ga-eme ka akwụkwọ ikike ahụ ghara ịdị irè.
• Wụnye ọkụ ọkụ na mpaghara ikuku nke ọma, pụọ na ebe okpomọkụ, ìhè anyanwụ kpọmkwem, na mmiri.
• Use only approved and compatible modular cables. This power supply unit does not include cables; they must be purchased separately.
• Gbaa mbọ hụ na njikọ niile edoberela nke ọma tupu ịgbanye sistemụ.
• Debe ebe ụmụaka na-apụghị iru.

Njirimara nchedo: The Phanteks Revolt power supply includes multiple protection mechanisms to ensure system stability and safety:

• OPP (Nchedo Ike Karịrị): Prevents damage from excessive total power output.
• OVP (N'elu Voltage Nchedo): Safeguards components from voltagna spikes.
• UVP (N'okpuru Voltage Nchedo): Na-echebe megide ezughị oke voltage nnyefe.
• SCP (Nchedo Mgbakọ Dị Mkpirikpi): Na-egbochi mmebi site na sekit dị mkpụmkpụ.
• OCP (N'elu Nchedo Ugbu a): Protects against excessive current on individual rails.
• OTP (N'elu Nchekwa Okpomọkụ): Shuts down the unit if internal temperatures become too high.
• Nchekwa enweghị ibu: Ensures stable operation even without a load.
• Reset Protection: Allows the unit to recover safely after a protection event.

3. Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu gị:

• 1x Phanteks Revolt 1200W Power Supply Unit (Model: PH-P1200PR_BK01C)
• 1x C14 (female) - C13 (male) Power cord (1500mm)
• 1x User’s manual (this document)
• 1x ntuziaka nwụnye
• 1x PSU bag
• 1x Zip tie bag
• 1 x Screw ngwugwu
• 1x Velcro pack
• 1x PSU tester

Note: Modular cables are NOT included with this power supply unit and must be purchased separately.

4. Ngwaahịa gafereview

4.1 Atụmatụ

• 1200W DC Output: Na-enye ample power for high-performance systems.
• 80 PLUS Platinum Certified: Achieves up to 94% efficiency at 50% load, reducing power consumption and heat.
• ATX 3.0 & PCIe 5.0 dị njikere: Fully supports the latest Intel ATX 3.0 specifications and includes a 12VHPWR connector for PCIe 5.0 GPUs, delivering up to 600W.
• Nhazi Modular zuru oke: Allows for custom cable selection and improved cable management. Cables are sold separately.
• 135mm Fluid Dynamic Bearing (FDB) Fan: Ensures quiet and efficient cooling with hybrid fan control for silent operation.
• High Peak Power Capability: Designed to handle power peaks up to 235% of its rated output, exceeding industry standards.
• Seasonic Collaboration: Developed with Seasonic to ensure high standards of performance and reliability.

4.2 Physical Dimensions and Components

The Phanteks Revolt 1200W PSU measures 160 mm (L) x 150 mm (W) x 86 mm (H) (6.3 in x 5.9 in x 3.4 in) and weighs 2.26 kg (4.98 lbs).

N'ihu View (Fan Side)

Modular Cable Connectors

Custom Cable Compatibility

Internal Design (Seasonic Platform)

Important Note: Cables Not Included

Ogwe azụ

Revolt Series Comparison

5. Ntọala na nwụnye

Before proceeding, ensure your system is powered off and disconnected from the AC outlet. Refer to your computer case and motherboard manuals for specific installation instructions.

5.1 Na-akwadebe maka Ntinye

1. Gather Components: Ensure you have the Phanteks Revolt PSU, your chosen modular cables (not included), mounting screws, and your computer case.
2. Mwepu static: Ground yourself to prevent electrostatic discharge (ESD) by touching a grounded metal object before handling components.

5.2 Installing the Power Supply

1. Tinye PSU: Carefully slide the Phanteks Revolt PSU into the designated power supply bay in your computer case. Secure it with the provided screws.
2. Jikọọ eriri modular: This PSU is fully modular. Connect only the necessary cables to the PSU's modular ports. Refer to the "Modular Cable Connectors" image in Section 4.2 for port identification.
   • Connect the 18+10pin cable to the motherboard.
   • Connect 8pin cables for CPU and PCIe as required by your motherboard and graphics card(s). The 12VHPWR connector is specifically for PCIe 5.0 GPUs.
   • Connect 6pin cables for SATA devices (SSDs, HDDs) and Molex peripherals.
3. eriri ụzọ: Route the connected cables neatly through your case for optimal airflow and aesthetics.
4. Jikọọ na akụrụngwa: Connect the other end of each modular cable to its respective component (motherboard, CPU, GPU, storage drives, etc.). Ensure all connections are firm and secure.
5. Igwe ọkụ AC: Connect the provided C14-C13 AC power cord to the PSU's AC inlet. Do not connect to a wall outlet yet.

6. Ntuziaka ọrụ

6.1 Ike mbido

1. After all internal connections are made and secured, connect the AC power cord from the PSU to a grounded wall outlet or surge protector.
2. Flip the main power switch on the rear of the PSU to the "ON" (I) position.
3. Power on your computer system using the case's power button.

6.2 Hybrid Fan Control

The Phanteks Revolt PSU features a 135mm Fluid Dynamic Bearing fan with hybrid fan control. A switch on the rear panel allows you to toggle between fan modes:

• Hybrid Mode (Default): The fan remains off under low loads for silent operation and only spins up when the power supply reaches a certain temperature or load threshold.
• Na ọnọdụ mgbe niile: The fan operates continuously, providing constant cooling. This mode may result in slightly higher noise levels but ensures maximum cooling performance.

Select the mode that best suits your preference for noise and cooling.

7. Nchọpụta nsogbu

If your system does not power on or experiences instability, refer to the following common troubleshooting steps:

• Enweghị ike:
  • Gbaa mbọ hụ na ejikọrọ eriri ọkụ AC na PSU na oghere mgbidi.
  • Verify the main power switch on the PSU is in the "ON" (I) position.
  • Check the wall outlet or surge protector for power. Try a different outlet.
  • Use the included PSU tester to verify if the power supply is functioning independently.
• Sistemu anaghị akwụsi ike/Mgbochi enweghị usoro:
  • Ensure all modular cables are firmly connected to both the PSU and the components. Loose connections can cause instability.
  • Verify that you are using the correct cables for each component (e.g., CPU power to CPU, PCIe power to GPU).
  • Check for any signs of overheating. Ensure proper airflow within your case.
  • If using the hybrid fan mode, try switching to "Always On" mode to see if it resolves temperature-related issues.
• Fans anaghị agba ọsọ:
  • In hybrid fan mode, the fan will not spin under low loads or temperatures. This is normal operation.
  • If the fan does not spin even under load or in "Always On" mode, contact Phanteks support.
• Isi ísì ma ọ bụ anwụrụ ọkụ:
  • Immediately disconnect the AC power cord from the wall outlet. Do not attempt to power on the system again.
  • Contact Phanteks support immediately.

For further assistance, please refer to the Phanteks support websaịtị ma ọ bụ kpọtụrụ ndị ahịa ha ọrụ.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

9.1 Akwụkwọ ikike nke onye nrụpụta

The Phanteks Revolt 1200W Power Supply Unit is covered by a Akwụkwọ ikike onye nrụpụta afọ 1 site na ụbọchị ịzụrụ. Akwụkwọ ikike a na-ekpuchi ntụpọ dị na ngwa na arụ ọrụ n'okpuru ojiji nkịtị. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.

Akwụkwọ ikike ahụ anaghị ekpuchi mmebi sitere na:

• Nrụnye ma ọ bụ ọrụ na-ezighi ezi.
• Mgbanwe ma ọ bụ ndozi na-akwadoghị.
• Accidental damage, abuse, or misuse.
• Natural disasters or external causes.

Opening the power supply unit will void the warranty.

9.2 Nkwado nka na ụzụ

For technical assistance, troubleshooting, or warranty inquiries, please visit the official Phanteks websaịtị ma ọ bụ kpọtụrụ ndị ahịa ha:

Phanteks Support Websaịtị

Please have your product model number (PH-P1200PR_BK01C) and proof of purchase ready when contacting support.