1. Okwu mmalite
This manual provides detailed instructions for the safe installation, operation, and maintenance of your DAKASON 8FT LED Linear Light Fixture, Model LSC-8FT80WH-TCP. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Ozi nchekwa dị mkpa:
- Gbanyụọ ọkụ mgbe ọ bụla na ihe nbibi sekit tupu ịwụnye ma ọ bụ rụọ ọrụ.
- Installation should be performed by a qualified electrician in accordance with all local electrical codes.
- Awụnyela n'akụkụ ihe ọkụ ọkụ.
- Ensure the fixture is securely mounted to prevent falling.
- Emebere ihe ndozi a maka naanị ime ụlọ.
2. Ihe ngwugwu
Nyochaa na akụrụngwa niile dị na emebighị ya tupu ịga n'ihu na ntinye.
- LED Linear Light Fixture Housing
- Integrated LED Chips
- oghere acrylic oyi kpọnwụrụ
- Junction-box Cover
- Ịkwanye kposara
- Wire Nuts (typically 5 per fixture)
- Wall Anchors (typically 4 per fixture)
- Safety Ropes (pre-attached or included)

Figure 2.1: DAKASON 8FT LED Linear Light Fixtures (4-pack shown).

Figure 2.2: Product dimensions (96.06 inches length, 3.15 inches width, 2.68 inches height) and accessories including screws, wire nuts, and wall anchors.
3. Nkọwapụta
| Nọmba nlereanya | LSC-8FT80WH-TCP |
| Akụkụ (L x W x H) | 96" x 4" x 4" (243.84 cm x 10.16 cm x 10.16 cm) |
| Wattage | Selectable: 80W / 70W / 60W |
| Mmepụta Lumen | Up to 10400 Lumens (at 80W) |
| Ịrụ ọrụ | 130 lm/W |
| Okpomọkụ agba (CCT) | Selectable: 3500K (Warm White) / 4000K (Day White) / 5000K (Day White) |
| Voltage | 120-277Vac |
| Na-ebelata | 0-10V Dimming (dimmer not included) |
| Ihe onwunwe | Solid Metal Housing, Frosted Acrylic Lens |
| Ụdị nwụnye | Flush Mount / Surface Mount (Suspension mount possible with additional hardware) |
| Asambodo | Edepụtara UL |
| Ogologo ndụ | awa 50,000 |

Figure 3.1: Key components and features of the DAKASON LED Linear Light Fixture.
4. Ntọala na nwụnye
Before starting, ensure power is OFF at the circuit breaker. This fixture requires hardwiring.
4.1 Nhọrọ nrịgo
The fixture supports flush mount (surface mount) directly to the ceiling or wall. Suspension mount is also possible with additional hanging hardware (not included).
- Kwadebe elu elu: Mark the desired mounting locations for the fixture. Ensure the surface can support the weight of the fixture.
- Ebe Ndozi Kwesịrị Ekwesị: Use the provided mounting screws and wall anchors (if necessary) to securely attach the fixture's metal housing to the ceiling or wall.
- Junction Box Cover: A white plate is included to cover the junction box opening, providing a clean finish.
- Ụdọ nchekwa: Utilize the pre-attached safety rope and fast clip to secure the fixture during wiring, preventing accidental drops.

Figure 4.1: Safety features and junction box cover for secure installation.

Ọgụgụ 4.2: Ọpụample of flush-mounted fixtures in a garage environment.
4.2 Igwe ọkụ eletrik
Connect the fixture's wires to your building's electrical system. This fixture is designed for 120-277Vac input.
- Connect the black wire from the fixture to the live (hot) wire from the power supply.
- Connect the white wire from the fixture to the neutral wire from the power supply.
- Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
- If using 0-10V dimming, connect the purple wire to the dimmer's positive (+) terminal and the gray wire to the dimmer's negative (-) terminal. Ensure the dimmer is compatible with 0-10V systems.
- Secure all connections with the provided wire nuts.
4.3 Ijikọ ọtụtụ ihe eji arụ ọrụ
The fixture features pre-drilled knockouts for end-to-end linking of up to 6 lights. Ensure total wattage does not exceed circuit capacity.

Figure 4.3: Illustration of linking multiple fixtures.
4.4 Reattaching the Lens Cover
After wiring and mounting, reattach the frosted acrylic lens cover. This step is crucial for proper light distribution and protection.
- Align the lens cover with the fixture housing.
- Gently squeeze the lens on both sides.
- Press the lens firmly into the housing until you hear a "click" sound, indicating it is securely in place.

Figure 4.4: Visual guide for reattaching the lens cover.
5. Ntuziaka ọrụ
5.1 Power and Color Temperature (CCT) Selection
Your DAKASON LED Linear Light Fixture features selectable wattage and color temperature settings. These switches are located on the fixture housing, typically near one end.
- Wattage Nhọrọ: Use the toggle switch to select between 80W, 70W, or 60W to adjust brightness.
- Nhọrọ CCT: Use the toggle switch to select between 3500K (Warm White), 4000K (Day White), or 5000K (Day White) to adjust the light color.
Mara: Adjust these settings before reattaching the lens cover for easier access.

Figure 5.1: Power selectable options and corresponding lumen output.

Figure 5.2: Color temperature selectable options and visual representation.
5.2 arụrụ arụrụ arụ
This fixture supports smooth 0-10V dimming when paired with a compatible 0-10V low voltage dimmer (not included). Connect the dimmer according to the instructions in Section 4.2.

Figure 5.3: Illustration of 0-10V dimming capability.

Figure 5.4: Visual representation of dimming range.
6. Nlekọta
The DAKASON LED Linear Light Fixture is designed for minimal maintenance with a long lifespan of 50,000 hours. Regular cleaning will help maintain optimal performance and appearance.
- Nhicha: Hụ na agbanyụrụ ọkụ tupu ị sachaa ya. Jiri ihe dị nro, kpọrọ nkụ, ma ọ bụ nke dị ntakịrị ọkụamp cloth to wipe the exterior of the fixture and lens. Do not use abrasive cleaners or solvents.
- Nyocha: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- Ọkụ: The integrated LED chips are not user-replaceable. Do not attempt to open the sealed LED compartment.
7. Nchọpụta nsogbu
If you encounter issues with your fixture, refer to the following common troubleshooting steps:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo. |
|
|
| Ìhè na-amagharị ma ọ bụ na-akụda na mberede. |
|
|
| Lens cover does not stay attached. |
|
|
If troubleshooting steps do not resolve the issue, please contact DAKASON customer support.
8. Akwụkwọ ikike na nkwado
DAKASON LED Linear Light Fixtures are UL listed and designed for quality and longevity, with a rated lifespan of 50,000 hours.
Akwụkwọ ikike: This product comes with a limited warranty. Specific warranty terms and duration may vary. Please refer to your purchase documentation or contact DAKASON customer support for details.
Nkwado ndị ahịa: If you have any questions, require assistance with installation, or experience any issues with your DAKASON product, please do not hesitate to contact us. Our customer service team is available to help.
You can visit the official DAKASON store for more information and contact options: DAKASON Store on Amazon.