D-Link DMS-108 8-Port 2.5GB Unmanaged Multi-Gigabit Switch User Manual

Okwu mmalite

The D-Link DMS-108 is an 8-Port 2.5GB Unmanaged Multi-Gigabit Switch designed to enhance network performance for devices requiring high-speed data transfer. This switch is ideal for connecting 2.5G NAS, 2.5G PCIe Adapters, 2.5G Servers, gaming PCs, and Wi-Fi 6 Access Points with 2.5G WAN ports. It features a durable metal housing, fanless design for silent operation, and supports energy-efficient Ethernet (EEE) to reduce power consumption.

This manual provides instructions for setting up, operating, maintaining, and troubleshooting your DMS-108 switch.

Foto: N'ihu view of the D-Link DMS-108 switch, showing 8 Ethernet ports and LED indicators.

Ihe ngwugwu

Chọpụta na ngwungwu gị nwere ihe ndị a:

• D-Link DMS-108 8-Port 2.5GB Unmanaged Multi-Gigabit Switch
• Ihe nkwụnye ọkụ
• Ntuziaka ntinye ngwa ngwa (QIG)

Ọ bụrụ na ihe ọ bụla na-efu ma ọ bụ mebie, biko kpọtụrụ onye na-ere ere D-Link nke mpaghara gị maka enyemaka.

Melite

Nwụnye anụ ahụ

The DMS-108 switch can be placed on a desktop or mounted on a wall. Ensure the installation location provides adequate ventilation and is free from excessive heat, humidity, or electromagnetic interference.

Ijikọ mgba ọkụ

1. Njikọ ike: Connect the provided power adapter to the power input port on the rear panel of the DMS-108 switch. Plug the other end of the power adapter into a standard electrical outlet. The power LED on the front panel will illuminate.

   Image: Rear panel of the DMS-108, highlighting the power input (12V===1A), ground screw (SWITCH GND), and Kensington lock slot.

2. Njikọ ngwaọrụ netwọk: Connect your network devices (e.g., computers, NAS, Wi-Fi 6 APs, gaming consoles) to any of the 8 available 2.5 Gigabit Ethernet ports using standard Ethernet cables (Cat5e or Cat6 recommended for optimal performance).

   Image: The D-Link DMS-108 switch demonstrating compatibility with existing Cat5e and Cat6 cables for 2.5x faster transfer rates.

The DMS-108 is a plug-and-play device, requiring no software installation or configuration. It will automatically detect the link speeds of connected devices (100Mb/1G/2.5G) and adjust for optimal performance.

Na-arụ ọrụ Switch

Ihe ngosi LED

The front panel of the DMS-108 features LED indicators for each port and for power status. These LEDs provide visual feedback on the switch's operation:

• Igwe ọkụ ọkụ: Indicates if the switch is powered on.
• Igwe ọkụ njikọ/ Act (kwa ọdụ ụgbọ mmiri):
  • Solid Green: Indicates a stable 2.5G network link.
  • Solid Blue: Indicates a stable 1G network link.
  • Solid Amber: Indicates a stable 100Mb network link.
  • Flashing: Indicates network activity (data transmission).
  • Off: No link or device connected.

Foto: nkọwa zuru ezu view of the DMS-108's front panel, highlighting the Link/Act LEDs for each of the 8 ports.

Atụmatụ igodo

• Mkparịta ụka akpaaka: Automatically senses the link speeds of connected devices (100Mb/1G/2.5G) and adjusts for compatibility and optimal performance.
• Ogo Ọrụ (QoS): Allows network traffic to be classified into 8 priority levels, ensuring critical data (e.g., gaming, video streaming) receives preferential treatment.
• Njikwa usoro: Helps minimize dropped packets during periods of high network congestion, leading to more reliable connections.
• IGMP snooping: Optimizes multicast data streams, which is beneficial for bandwidth-intensive applications like IPTV, by forwarding multicast traffic only to ports that have requested it.
• Energy-Efficient Ethernet (EEE) (IEEE 802.3az): Reduces power consumption during periods of low network activity, conserving energy and lowering operational costs.

Image: An illustration demonstrating how the DMS-108 switch can upgrade a network to ultra-fast multi-gigabit speeds by connecting various devices.

Image: The DMS-108 switch highlighting its durable metal casing, silent fanless design, energy-efficient features, and D-Link's 35+ years of experience.

Nlekọta

To ensure optimal performance and longevity of your D-Link DMS-108 switch, follow these maintenance guidelines:

• Igwe ikuku: Ensure the switch is placed in a location with adequate airflow. Do not block the ventilation holes on the sides of the device.
• Nhicha: Periodically clean the exterior of the switch with a soft, dry cloth. Avoid using liquid or aerosol cleaners, as they may damage the device.
• Njikwa USB: Keep network cables organized and free from kinks or excessive bends to prevent signal degradation.
• Ịnye ọkụ: Use only the power adapter provided with the switch. If the power adapter is damaged, contact D-Link support for a replacement.
• Mmelite femụwe: As an unmanaged switch, the DMS-108 typically does not require firmware updates. However, always refer to the D-Link support website for any specific recommendations.

Nchọpụta nsogbu

If you encounter issues with your DMS-108 switch, refer to the following troubleshooting tips:

• Enweghị ike:
  • Check if the power adapter is securely connected to the switch and the electrical outlet.
  • Nyochaa na oghere eletrik na-arụ ọrụ nke ọma site na itinye na ngwaọrụ ọzọ.
  • Gbaa mbọ hụ na ọkụ LED na mgba ọkụ na-enwu.
• Enweghị njikọ na Port:
  • Ensure the Ethernet cable is securely connected to both the switch port and the connected device.
  • Verify that the connected device is powered on and its network adapter is enabled.
  • Gbalịa eriri Ethernet dị iche iji wepụ eriri adịghị mma.
  • Test with a different port on the switch.
  • Check the Link/Act LED for the specific port. If it's off, there's no active connection.
• Ọsọ netwọk dị nwayọ:
  • Ensure you are using Cat5e or Cat6 Ethernet cables for 2.5G connections. Older cables (e.g., Cat5) may limit speed.
  • Verify that your connected devices support 2.5G Ethernet. The switch will operate at the highest common speed.
  • Check the Link/Act LED color for the port to confirm the negotiated speed (Green for 2.5G, Blue for 1G, Amber for 100Mb).
  • Reduce network congestion by limiting simultaneous bandwidth-intensive activities.
• Njikọ na-adịte aka:
  • Lelee njikọ eriri niile maka ikesa ma ọ bụ mmebi.
  • Ensure the switch is not overheating. Provide adequate ventilation.
  • Zere idobe mgba ọkụ n'akụkụ ebe nnyonye anya elektrọnịkị siri ike.

If problems persist, contact D-Link Technical Support for further assistance.

Nkọwapụta

Ozi akwụkwọ ikike

The D-Link DMS-108 switch comes with a Limited Warranty. For detailed information regarding the terms and conditions of your warranty, please refer to the official D-Link websaịtị ma ọ bụ kaadị akwụkwọ ikike gụnyere ngwaahịa gị.

Optional protection plans may be available for purchase, offering extended coverage beyond the standard manufacturer's warranty. Please check with your retailer for details on available protection plans.

Nkwado

For technical support, product registration, or to download the latest documentation and software, please visit the official D-Link support websaịtị:

www.dlink.com/support

You can also find additional resources and frequently asked questions on the D-Link websaịtị.

Video ngwaahịa

Watch the official D-Link video for an overview of D-Link Switch Solutions for various environments.