Jectse Digital Voice Recorder Watch User Manual

1. Okwu mmalite

Thank you for choosing the Jectse Digital Voice Recorder Watch. This device is designed for convenient and discreet audio recording, featuring voice activation, noise reduction, and timestamp capabilities. This manual provides essential information for the proper setup, operation, and maintenance of your new voice recorder watch.

2. Ngwaahịa gafereview

Akụkụ ndị bụ isi:

• Voice Activated Recording: Automatically records when sound is detected and pauses when silent, conserving battery and memory.
• Mbelata mkpọtụ: Built-in professional chip for clear audio capture.
• Oge kacha ntaamp Ọrụ: Records the exact start and end times of each recording for accurate referencing.
• Batrị enwere ike ịchaji: Integrated 110mAh polymer lithium battery, supports recording while charging.
• Ogologo ndụ batrị: Up to 20 hours of continuous recording and 30 days of standby time.
• Nchekwa ebe nchekwa: 32GB n'ime ebe nchekwa.
• Ụdị ndekọ: WAV.
• Ụdị ọkpụkpọ: MP3, WMA, WAV.

Ọdịnaya ngwugwu:

• 1 x Voice Recorder Watch
• 1 x eriri nchaji
• 1 x Igwe ntị
• 1 x Akwụkwọ ntuziaka (akwụkwọ a)
• 1 x Adapter Cable

Image 1: The Jectse Digital Voice Recorder Watch, showcasing its sleek design and the timestamp feature for accurate recording data generation.

Image 2: All items included in the package: the voice recorder watch, charging cable, earphone, and adapter cable.

3. Nhazi

Nchaji mbụ:

1. Tupu ojiji nke mbụ, chajịa ngwaọrụ ahụ kpamkpam.
2. Connect the provided charging cable to the watch's USB port.
3. Tinye nsọtụ nke ọzọ nke eriri chaja ahụ n'ime ihe nkwụnye ike USB (anaghị etinye ya) ma ọ bụ ọdụ USB nke kọmputa.
4. The device will indicate charging status (e.g., an LED light). Allow sufficient time for a full charge.

Foto 3: nkọwa zuru ezu view of the USB charging port on the side of the voice recorder watch, with its protective cover open.

Jikọọ na Kọmputa:

To transfer recorded files or set the timestamp, connect the watch to your computer using the provided USB cable. The device will appear as a removable storage drive.

4. Ntuziaka ọrụ

Gbanyụọ/ Gbanyụọ:

• To power on, locate the power button (refer to device diagram if available) and press and hold it until the indicator light activates.
• Iji gbanyụọ ọkụ, pịa ma jide bọtịnụ ike ahụ ọzọ ruo mgbe ọkụ ihe ngosi ahụ gbanyụrụ.

Edekọ:

• Once powered on, the device is typically in standby mode, ready for voice-activated recording.
• When sound is detected, the recorder will automatically begin recording.
• When silence is detected, the recorder will automatically pause, saving memory and battery.
• Recordings are saved as WAV files.

Nkpọghachi:

• Connect the provided earphone to the watch's earphone jack.
• Use the control buttons on the watch (refer to device diagram) to navigate through recordings and initiate playback.
• The device supports MP3, WMA, and WAV playback formats.

Oge kacha ntaamp Ọrụ:

The watch automatically embeds a timestamp into each recording, indicating the generation time and end time. To ensure accuracy, synchronize the watch's internal clock by connecting it to a computer. The computer's system time will typically update the device's timestamp.

Ịchaji mgbe a na-edekọ:

The device supports recording while connected to a power source, allowing for extended recording sessions.

5. Nlekọta

• Debe ngwaọrụ ahụ ọcha site na iji akwa dị nro na-ehichapụ ya.
• Avoid exposing the watch to extreme temperatures, direct sunlight, or moisture.
• Do not attempt to disassemble the device, as this will void the warranty and may cause damage.
• Chekwaa ngwaọrụ ahụ n'ebe dị jụụ, kpọrọ nkụ mgbe ọ naghị eji ya.

6. Nchọpụta nsogbu

Ngwaọrụ anaghị agbanwu:

• Ensure the battery is charged. Connect to a power source and allow it to charge for at least 30 minutes.
• Pịa ma jide bọtịnụ ike ahụ nke ọma ruo sekọnd ole na ole.

Enweghị ike ịdekọ:

• Check if the device has sufficient memory. Transfer files to a computer to free up space if needed.
• Ensure the battery is not critically low. Charge the device.

Ogo ọdịyo adịghị mma:

• Ensure the recording environment is not excessively noisy.
• Check if the microphone is obstructed.

Oge kacha ntaamp is incorrect:

• Connect the watch to a computer. The device's internal clock should synchronize with the computer's system time.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

Specific warranty details for the Jectse Digital Voice Recorder Watch are not provided in this manual. For information regarding warranty coverage, technical support, or service, please refer to the product packaging or contact the manufacturer directly through their official websaịtị ma ọ bụ ọwa ọrụ ndị ahịa.