SILVERCREST SNS 45 B4 UV Nail Lamp Kit

Okwu mmalite

Thank you for choosing the SILVERCREST SNS 45 B4 UV Nail Lamp Kit. This comprehensive 217-piece starter kit is designed for strengthening natural nails, reshaping, and filling. The UV lamp features an automatic shut-off function with selectable times of 90, 150, or 240 seconds. Please read this manual carefully before first use to ensure safe and proper operation of the device and its components. Keep these instructions for future reference.

An image showing the SILVERCREST SNS 45 B4 UV nail lamp unit along with several components of the 217-piece starter kit, including various gels, brushes, and files.

Ntuziaka nchekwa

Always observe the following safety precautions when using electrical appliances and handling chemical products:

• Nchekwa Eletriki: Ensure the device is connected to a properly grounded power outlet. Do not use if the power cord or plug is damaged. Keep the device away from water or damp gburugburu.
• Mkpughe ọkụ UV: Avoid direct eye contact with the UV light. Prolonged exposure to UV light can be harmful to eyes and skin. Use appropriate eye protection if necessary.
• Ijikwa kemịkalụ: Use nail gels, glues, and other liquids in a well-ventilated area. Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical advice if irritation persists. Keep all chemical products out of reach of children.
• Ụmụaka na anụ ụlọ: This device is not a toy. Keep it out of reach of children and pets.
• Ezubere iji: Use the device only for its intended purpose as described in this manual. Do not modify the device.
• Nchekwa: Store the device and all components in a cool, dry place when not in use.

Ihe ngwugwu

The SILVERCREST SNS 45 B4 kit includes the following items:

• 1 x UV Nail Lamp Nkeji
• 4 x UV-A 9 W Bulbs (replaceable)
• 2 x Nail Glue (3 g each)
• 2 x UV Gel (transparent, 15 ml each)
• 1 x French Gel (white, 5 ml)
• 1 x Nail Oil (4 ml)
• 1 x Finishing Solution (100 ml)
• 1 x Sand Blade File
• 1 x Sanding Block
• 3 x Polishing Files (fine, medium, coarse)
• 1 x Cuticle Pusher
• 1 x ahịhịa
• 1 x Spot Swirl Applicator with various tips
• 100 x Cells (presumably nail wipes or forms)
• 100 x Nail Tips (various sizes)
• 1 x Nail Tip Cutter

Note: Nail polish is not included in this kit.

Melite

1. Ịkwapu: Carefully remove all components from the packaging. Retain the packaging for storage or transport.
2. Nkwanye: Place the UV nail lamp unit on a stable, flat, and heat-resistant surface. Ensure there is adequate ventilation around the device.
3. Bulb Installation/Check: Mepee lamp unit and ensure the four UV-A 9 W bulbs are securely installed. If not, gently insert them into their sockets.
4. Njikọ ike: Connect the power cord to the UV nail lamp unit and then plug it into a suitable electrical outlet.

Ntuziaka ọrụ

Follow these steps for using your UV Nail Lamp Ngwa:

1. Nkwadebe: Prepare your nails by cleaning, filing, and pushing back cuticles using the provided tools. Apply nail tips if desired, and shape them with the nail tip cutter and files.
2. Ngwa jel: Apply a thin, even layer of the desired UV gel (transparent or French white) or nail glue to your nails.
3. Curing Time Selection: Select the desired automatic shut-off time on the UV lamp: 90, 150, or 240 seconds, depending on the gel or glue instructions.
4. Ngwọta: Carefully place your hand or foot into the UV lamp otu. Nke lamp will activate and begin the curing process.
5. Nwepu akpaaka: Ndị lamp will automatically turn off once the selected time has elapsed. Remove your hand or foot.
6. Emecha: After curing, use the finishing solution to remove any sticky residue. Shape and polish your nails further with the sanding block and polishing files. Apply nail oil for hydration.
7. Tinyegharịa: Repeat steps for additional layers of gel or for other nails as needed.

Nlekọta

• Nhicha: Disconnect the device from the power supply before cleaning. Wipe the exterior of the UV lamp unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ndokwa bọlbụ: The UV-A 9 W bulbs are replaceable. If a bulb stops working or its effectiveness diminishes, replace it with a new bulb of the same type and wattage. Ensure the device is unplugged before attempting to replace bulbs.
• Nchekwa: When not in use, store the UV nail lamp kit and all its components in a clean, dry place, away from direct sunlight and extreme temperatures.

Nchọpụta nsogbu

• Lamp Agbanyeghị:
  • Lelee ma ọ bụrụ na etinyere eriri ọkụ na echekwabara na ngwaọrụ ma oghere eletrik.
  • Nyochaa na ntinye ọkụ na-arụ ọrụ.
  • Inspect the UV bulbs to ensure they are correctly seated and not burnt out. Replace any faulty bulbs.
• Gels Not Curing Properly:
  • Ensure the correct curing time is selected for the specific gel product being used.
  • Check the UV bulbs for proper function. Dim or non-working bulbs will affect curing.
  • Apply gels in thin layers. Thick layers may not cure completely.
  • Verify that the gel product is compatible with UV lamps.
• Automatic Shut-off Malfunction:
  • If the automatic shut-off feature does not work, unplug the device, wait a few minutes, and plug it back in. If the issue persists, contact customer support.

Nkọwapụta

Akwụkwọ ikike na nkwado

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact the retailer or manufacturer directly. Keep your proof of purchase for warranty claims.