aigo ACSE240-BK
Aigo AC SE 240 Rainbow 240mm Water Cooler Instruction Manual
Model: ACSE240-BK
1. Ngwaahịa gafereview
The Aigo AC SE 240 is an all-in-one (AIO) liquid CPU cooler designed to provide efficient thermal management for your computer's processor. Featuring a 240mm radiator and two fans with Rainbow lighting, it offers effective cooling performance for a wide range of Intel and AMD sockets.
This manual provides essential information for the proper installation, operation, and maintenance of your Aigo AC SE 240 Water Cooler.
2. Ihe ngwugwu
Please verify that all components listed below are present in your package before proceeding with the installation.

Foto: All components included with the Aigo AC SE 240 Water Cooler, laid out on a white background. This includes the radiator with two fans, the CPU block/pump, tubing, various mounting brackets for Intel and AMD sockets, screws, thermal paste, and a fan/RGB controller.
- 240mm Radiator with integrated pump/CPU block and tubing
- Two 120mm Fans (Rainbow lighting)
- Intel Mounting Bracket Kit (LGA 2066/ 2011-v3 / 2011 / 1700 / 1366 / 1200 / 115X)
- AMD Mounting Bracket Kit (FM1 / FM2 / FM2+ / AM2 / AM2+ / AM3 / AM3+ / AM4)
- Backplate for Intel sockets
- Ịkwanye skru na Standoffs
- Thermal Tapawa
- Fan/RGB Controller (if applicable, inferred from image)
- Akwụkwọ ntuziaka (akwụkwọ a)
3. Ntuziaka nwụnye
This section provides general steps for installing the Aigo AC SE 240 Water Cooler. Refer to your motherboard and PC case manuals for specific instructions regarding component placement and cable management.
3.1 Prepare the CPU and Motherboard
- Gbaa mbọ hụ na agbanyụrụ sistemụ gị wee kepụ ya na isi iyi ike.
- Wepụ ihe mkpuchi CPU ọ bụla dị adị. Jiri mmanya isopropyl hichaa elu CPU ahụ nke ọma iji wepụ ihe mkpuchi okpomọkụ ochie.
- Identify the correct mounting bracket for your CPU socket (Intel or AMD).
3.2 Install the Radiator and Fans

Foto: The Aigo AC SE 240 Water Cooler showing the 240mm radiator with two fans attached, displaying their rainbow LED lighting. The pump/CPU block is connected via two braided tubes.
- Attach the two 120mm fans to the radiator using the provided long screws. Ensure the fan airflow direction is correct for your case (typically intake or exhaust).
- Mount the radiator assembly to an available 240mm fan mount in your PC case (e.g., top, front, or rear). Use the appropriate screws to secure it.
3.3 Install the CPU Block/Pump
- Apply a small amount of thermal paste to the center of your CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient.
- Attach the correct mounting standoffs and brackets to your motherboard around the CPU socket. For Intel sockets, you may need to install the backplate first.
- Carefully place the CPU block/pump onto the CPU, aligning the mounting holes.
- Secure the CPU block/pump with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.
3.4 Jikọọ eriri
- Connect the pump's power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. If neither is available, use a SYS_FAN header.
- Connect the fan power cables to the CPU_FAN and/or SYS_FAN headers on your motherboard, or to the included fan/RGB controller.
- Connect the RGB cables from the fans and pump to the included RGB controller, and then connect the controller to an available RGB header on your motherboard (if applicable) or a SATA power connector.
- Organize cables for optimal airflow and aesthetics.
4. Ntuziaka ọrụ
Once installed, the Aigo AC SE 240 Water Cooler operates automatically. The pump and fans will adjust their speeds based on CPU temperature, as controlled by your motherboard's BIOS/UEFI settings or dedicated software.
- Ntọala BIOS/UEFI: Access your motherboard's BIOS/UEFI to configure fan curves and pump speed settings. It is recommended to set the pump to run at 100% speed for optimal cooling performance and to prevent air bubbles from settling.
- Njikwa ngwa ngwa: If your motherboard supports it, you may use manufacturer-provided software to fine-tune fan speeds, monitor temperatures, and customize RGB lighting effects.
- Mmalite mbụ: During the first few minutes of operation, you might hear gurgling sounds as air bubbles are purged from the loop. This is normal and should subside.

Foto: A elu-ala view of the Aigo AC SE 240 Water Cooler, highlighting the CPU block with its illuminated Aigo logo and the two rainbow-lit fans on the radiator.
5. Nlekọta
Regular maintenance ensures optimal performance and longevity of your water cooler.
- Nhicha uzuzu: Na-asachapụ uzuzu site na ntù radiator na agụba fan site na iji ikuku abịakọrọ ma ọ bụ ahịhịa dị nro. Uzuzu buru ibu nwere ike igbochi ikuku ikuku ma belata arụmọrụ jụrụ oyi.
- Nyocha tubing: Visually inspect the tubing and connections for any signs of leaks, kinks, or damage. Address any issues immediately.
- mkpọtụ mgbapụta: If the pump starts making unusual noises, it may indicate air trapped in the loop or a failing pump. Ensure the pump is running at full speed and try gently tilting your PC case to help dislodge air bubbles.
6. Nchọpụta nsogbu
This section addresses common issues you might encounter with your Aigo AC SE 240 Water Cooler.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Okpomọkụ CPU dị elu |
|
|
| Fans/RGB not lighting up |
|
|
| mkpọtụ mgbapụta na-adịghị ahụkebe |
|
|
7. Nkọwapụta
Detailed technical specifications for the Aigo AC SE 240 Water Cooler.
- Ụdị: ACSE240-BK
- Intel Socket Compatibility: LGA 2066/ 2011-v3 / 2011 / 1700 / 1366 / 1200 / 115X
- AMD Socket Compatibility: FM1 / FM2 / FM2+ / AM2 / AM2+ / AM3 / AM3+ / AM4
- Ogologo Tube: 395 mm
- Ọsọ mgbapụta: 3200 ± 10% RPM
- Mgbapụta Voltage: 12V
- Akụkụ Radiator: 274 x 120 x 27 mm
- Akụkụ ndị fan: 120 x 120 x 25 mm
- Ọsọ onye ofufe: 800 ~ 1800 RPM
- Ofufe ikuku: 64.05 CFM
- Ọkwa mkpọtụ: 30 dBA ± 10%
- TDP: 210W
- Ụzọ oyi: Mmiri (mmiri)
- Ngwa dakọtara: Desktọpụ
8. Akwụkwọ ikike na nkwado
For warranty information, technical support, or service inquiries, please refer to the official Aigo websaịtị ma ọ bụ kpọtụrụ onye na-ere ahịa gị. Debe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.
Official Aigo Websaịtị: www.aigocooler.com (Rịba ama: Nke a bụ ebe njide ihe URL. Please verify the actual official website for Aigo products.)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.