Zurn P6900-B-L

Zurn P6900-B-L AquaSense Electronics Module with Solenoid Instruction Manual

Model: P6900-B-L | Brand: Zurn

1. Okwu mmalite

The Zurn P6900-B-L AquaSense Electronics Module with Solenoid is a replacement component designed for Zurn AquaSense sensor faucets, specifically models Z6912, Z6913, Z6915, and Z6920. This module integrates the solenoid valve, battery pack, and the necessary wiring to connect to the faucet's infrared proximity sensor, enabling hands-free operation. This manual provides instructions for proper installation, operation, and maintenance of the module.

2. Ozi nchekwa

  • Gbanyụọ mmiri na paịpụ mmiri tupu ịmalite nrụnye ma ọ bụ ndozi ọ bụla.
  • Disconnect electrical power if applicable before servicing.
  • Yiri akụrụngwa nchebe kwesịrị ekwesị, dị ka ugogbe nchekwa na uwe aka.
  • Gbaa mbọ hụ na njikọ niile echekwabara iji gbochie ntapu.
  • Tụfuo batrị ochie nke ọma dịka iwu obodo siri dị.

3. Ihe ngwugwu

Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:

  • Zurn P6900-B-L AquaSense Electronics Module with Solenoid
  • Battery Pack (integrated)
  • Batrị Alkaline AA 4 (gụnyere)
  • Connecting Wire to Faucet Sensor
  • Small Hex Key/Wrench (for securing connections, if applicable)
  • O-ring (for sealing connections, if applicable)
Zurn P6900-B-L Electronics Module with included batteries and hex key
Image 3.1: Zurn P6900-B-L Electronics Module with included batteries and hex key. This image displays the main module unit, four AA batteries, and a small hex key, which are typically included in the package.

4. Ntọala na nwụnye

Follow these steps to install the Zurn P6900-B-L Electronics Module:

  1. Gbanyụọ ntinye mmiri: Locate the main water shut-off valve for the faucet and turn it off completely.
  2. Disconnect Old Module (if replacing): Carefully disconnect the existing electronics module from the faucet sensor and water lines. Be prepared for residual water.
  3. Prepare New Module: Ensure the new P6900-B-L module has the included 4 AA alkaline batteries properly installed in the battery compartment.
  4. Jikọọ ahịrị mmiri: Attach the solenoid valve portion of the new module to the appropriate hot and cold water supply lines. Use thread sealant tape or pipe dope as recommended by local plumbing codes. Ensure connections are hand-tight, then use a wrench for a final quarter-turn, avoiding overtightening.
  5. Njikọ waya sensọ: Carefully connect the wire from the electronics module to the faucet's infrared proximity sensor. The connector pins are delicate; align them precisely to avoid bending. Removing any rubber o-ring on the connector might assist in feeling for a solid connection, as a coupler nut typically secures the pieces.
  6. Modul echedoro: Mount or secure the electronics module in a suitable location, typically under the sink, ensuring it is protected from moisture and easily accessible for future maintenance.
  7. Weghachite mbubata mmiri: Slowly turn the main water supply back on and check for any leaks at all connection points.
  8. Ọrụ nnwale: Activate the faucet sensor to verify proper water flow and shut-off.
N'okpuru view of Zurn P6900-B-L Electronics Module showing connection points
Foto 4.1: N'okpuru view of Zurn P6900-B-L Electronics Module showing connection points. This image highlights the water inlet and outlet connections, as well as the sensor wire port on the module.

5. Ntuziaka ọrụ

The Zurn AquaSense Electronics Module controls water flow in conjunction with the faucet's infrared proximity sensor. To operate the faucet:

  • Nkwalite: Place your hands within the detection range of the faucet's sensor. The sensor will detect your presence.
  • Usoro mmiri: Upon detection, the electronics module will activate the solenoid valve, allowing water to flow from the faucet.
  • Nkwụsị: Remove your hands from the sensor's detection range. The module will then close the solenoid valve, stopping the water flow.

The system is designed for hands-free operation, promoting hygiene and water conservation.

6. Nlekọta

Regular maintenance ensures optimal performance and longevity of your Zurn AquaSense Electronics Module.

6.1. Ngbanwe batrị

The module is powered by 4 AA alkaline batteries. When the batteries are low, the faucet may exhibit inconsistent operation or cease to function. To replace the batteries:

  1. Gbanyụọ ntinye mmiri: Gbanyụọ mmiri na-esi na mmiri.
  2. Nweta ngalaba batrị: Locate the battery compartment on the electronics module. This is typically secured with a cover.
  3. Wepu batrị ochie: Open the compartment and remove the old AA batteries.
  4. Fanye batrị ọhụrụ: Insert four new AA alkaline batteries, ensuring correct polarity (+/-).
  5. Ụlọ echedoro: Mechie ma sie ike mkpuchi nke ebe batrị ahụ.
  6. Restore Water Supply and Test: Turn the water supply back on and test the faucet's operation.

6.2. Nhicha

Periodically inspect the module and connections for any signs of corrosion or debris. Clean the exterior of the module with a soft, damp akwa . Ejila ihe nchacha abrasive ma ọ bụ ihe mgbaze.

7. Nchọpụta nsogbu

If your Zurn AquaSense faucet is not functioning correctly, refer to the following table for common issues and solutions:

NsogbuIhe nwere ike imeNgwọta
No water flow when sensor is activatedBatrị dị ala ma ọ bụ nwụrụ anwụ
Akwụsịla mmiri
Sensor wire disconnected or damaged
Solenoid valve adịghị arụ ọrụ
Dochie batrị
Check water supply valve
Verify sensor wire connection
Contact Zurn support for solenoid replacement
Water flows continuouslySensọ gbochiri ma ọ bụ mejọrọ
Solenoid valve stuck open
Clean sensor lens; check for obstructions
Contact Zurn support for solenoid inspection/replacement
Mmiri na-adịghị ikeMmiri dị ala
Igwe ikuku mechiri
Solenoid partially obstructed
Check building water pressure
Clean or replace faucet aerator
Contact Zurn support for solenoid inspection
Sensọ anaghị azaBatrị dị ala ma ọ bụ nwụrụ anwụ
Sensor lens dirty
Sensor wire disconnected or damaged
Dochie batrị
Igwe ihe mmetụta dị ọcha
Verify sensor wire connection

8. Nkọwapụta

NjirimaraNkọwa
Aha NlereanyaP6900-B-L
Nọmba akụkụP6900-B-L
Ibu Ibu1.12 pound
Akụkụ ngwaahịa6 x 4 x 3.2 sentimita asatọ
Ihe onwunwePlastic, metal
Batrị4 AA Alkaline (gụnyere)
Compatible FaucetsZ6912, Z6913, Z6915, Z6920 Series
Njirimara Pụrụ IcheNdu efu
UPC670240576582

9. Akwụkwọ ikike na nkwado

The Zurn P6900-B-L AquaSense Electronics Module is covered by a limited manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your original Zurn product or visit the official Zurn websaịtị.

For technical support, replacement parts, or further assistance, please contact Zurn Customer Service:

  • Websaịtị: www.zurn.com
  • Ozi mkpọtụrụ: Refer to the 'Contact Us' section on the Zurn websaịtị maka nọmba ekwentị na nkwado email.

© 2024 Zurn Industries. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.