Ntuziaka Onye Ọrụ nke WORKPRO 3.6V Ahịhịa na Mkpụcha Osisi Na-enweghị Ekwentị

Okwu mmalite

Thank you for choosing the WORKPRO 3.6V Cordless Grass and Shrub Shear. This versatile 2-in-1 tool is designed for efficient trimming of grass edges and small shrubs. It features a lightweight design, powerful motor, and a long-lasting battery for convenient outdoor use. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image: The WORKPRO 3.6V Cordless Grass and Shrub Shear, showing the main unit, the grass shear blade, the shrub shear blade, and the Type-C charging cable.

Ozi nchekwa

Na-edebe nchekwa nchekwa mgbe niile mgbe ị na-eji ngwa eletrik iji belata ihe egwu nke ọkụ, ujo eletrik na mmerụ ahụ nkeonwe.

• Gụọ akwụkwọ ntuziaka a: Read and understand all instructions before operating the tool.
• Mee ka mpaghara doo anya: Keep children, bystanders, and pets away from the operating area.
• Yiri ngwa nchebe: Always wear safety glasses, gloves, and appropriate footwear.
• Avoid Contact with Blades: Never touch the blades while the tool is running or connected to power.
• Njide echekwara Jide ngwa ahụ nke ọma mgbe niile site n'aka abụọ gị mgbe ị na-arụ ọrụ.
• Double Switch Safety: The tool features a double switch mechanism to prevent accidental activation. Ensure both switches are engaged for operation.
• Ịchaji: Use only the provided Type-C charging cable and a compatible 5V/1A charger. Do not use the tool while charging.
• Nchekwa: Chekwaa ngwá ọrụ ahụ n'ebe kpọrọ nkụ, nke dị nchebe, nke ụmụaka na-apụghị iru.

Image: Close-up of the ergonomic safety lock and ON/OFF switch, highlighting the dual activation mechanism for safe operation.

Ihe ngwugwu

Nyochaa na ihe niile dị na ọ dị mma mgbe ebupuchara ya:

• 1 x WORKPRO Grass and Shrub Shear Unit
• 1 x Grass Blade (75 mm wide)
• 1 x Shrub Blade (120 mm length)
• 1 x Ụdị-C eriri USB
• 1 x Akwụkwọ ntuziaka onye ọrụ

Ngwaahịa gafereview

Familiarize yourself with the components of your WORKPRO shear:

Image: Diagram showing key components: Type-C Charging Port with Indicator, Type-C Cable (1M), Safety Lock-off Button, ON/OFF Switch, Blade Release Button, TPR Anti-Slip Handle, and Shrub Blade. The unit weighs approximately 370g.

• Isi ngalaba: Ergonomic body with integrated motor and battery.
• Grass Blade: Designed for trimming grass edges, 75mm cutting width.
• Shrub Blade: Designed for shaping shrubs and small branches, 120mm cutting length.
• Ụdị-C ọdụ ụgbọ mmiri: Maka ịchaji batrị dị n'ime.
• Safety Lock-off Button: Na-egbochi mmalite mberede.
• Gbanyụọ/gbanyụọ Activates the motor when the safety lock is disengaged.
• Bọtịnụ mwepụta agụba: Allows for quick and easy blade changes.
• TPR Anti-Slip Handle: Provides a comfortable and secure grip.

Melite

Ịchaji batrị

The tool is equipped with a 2000mAh Lithium-ion battery. Before first use, fully charge the battery.

1. Locate the Type-C charging port on the tool.
2. Connect the provided Type-C charging cable to the tool and to a 5V/1A USB power source (e.g., power bank, Type-C charger, car charger, laptop/PC USB port). Note: USB charging brick is not included.
3. The charging indicator light will illuminate (typically red) during charging.
4. Once fully charged, the indicator light will change (typically green). Charging time is approximately 2-3 hours.
5. Kwupu chaja ozugbo ochachachara.

Image: Illustration of the WORKPRO shear being charged via a Type-C cable, showing compatible power sources like a power bank, Type-C charger, car charger, and laptop/PC. The charging indicator lights (red for charging, green for fully charged) are also depicted.

Ịwụnye/Ịgbanwe agụba

Ensure the tool is turned off and disconnected from any power source before changing blades.

1. Press the Blade Release Button located on the top of the tool.
2. Carefully remove the currently installed blade by pulling it away from the unit.
3. Align the desired blade (grass or shrub) with the slot on the tool.
4. Push the blade firmly into place until it clicks, indicating it is securely locked.
5. Verify the blade is securely attached by gently pulling on it.

Image: Diagram illustrating the dimensions of both the grass and shrub blades, and a close-up showing the easy and safe blade change mechanism with the blade release button.

Ntuziaka ọrụ

Always wear appropriate safety gear before operating the shear.

Ịmalite na ịkwụsị ngwá ọrụ

1. Ensure the desired blade is securely installed.
2. Jide ngwá ọrụ ahụ nke ọma.
3. To start, press and hold the Safety Lock-off Button with your thumb.
4. While holding the safety button, press the ON/OFF Switch with your index finger. The blades will begin to move.
5. To stop, release the ON/OFF Switch. The blades will stop.

Using the Grass Shear Blade

The grass shear blade is ideal for trimming grass edges around flowerbeds, pathways, and other areas inaccessible to larger mowers.

• Ensure the grass blade (75mm wide) is installed.
• Hold the tool with the blade parallel to the ground or at a slight angle for precise edging.
• Move the tool slowly and steadily along the grass edge.
• Avoid cutting wet grass, as it can clog the blades and reduce efficiency.

Image: Depicts the two cutting modes: Grass Shear with a maximum cutting width of 75mm, and Hedge Trimmer with a maximum cutting length of 118mm and maximum cutting thickness of 7.8mm.

Using the Shrub Shear Blade

The shrub shear blade is suitable for shaping and trimming small shrubs, hedges, and ornamental plants. It can cut branches up to 7.8mm in diameter.

• Ensure the shrub blade (120mm length) is installed.
• Hold the tool at a comfortable angle for trimming.
• Work in small sections, making smooth, even passes.
• Do not force the blades through thick branches. If resistance is met, reposition the tool or use a different cutting tool for larger branches.

Image: Collage showing the WORKPRO shear being used for various trimming tasks, including shaping small trees, weeding, and trimming potted plants, demonstrating its versatility.

Nlekọta

Nlekọta oge niile na-eme ka arụmọrụ dị mma ma gbasaa ndụ nke ngwá ọrụ gị.

Nhicha

• Always turn off the tool and remove the blade before cleaning.
• Use a soft brush or cloth to remove debris, sap, and dirt from the blades and housing.
• Do not use abrasive cleaners or solvents, as they can damage the plastic parts.
• Wipe the blades with a lightly oiled cloth to prevent rust.

Nlekọta agụba

• The blades are made of premium 65Mn steel for high hardness and wear resistance.
• Inspect blades regularly for damage or dullness.
• If blades become dull, they can be sharpened by a professional or replaced.
• Store blades in a dry place to prevent corrosion.

Foto: nso nso view of the premium 65Mn steel blades, emphasizing their high hardness, wear resistance, sharpness, and long life.

Nchekwa

• Store the tool in a cool, dry place, away from direct sunlight and moisture.
• Ensure the battery is partially charged (around 50%) before long-term storage to maintain battery health.
• Keep out of reach of children and unauthorized users.

Nchọpụta nsogbu

Nkọwapụta

Image: Visual representation of the upgraded power motor (1100rpm) and the long-lasting 2000mAh Lithium-ion battery, indicating over 40 minutes of no-load operation time.

Akwụkwọ ikike na nkwado

For warranty information or technical support, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

Onye nrụpụta: Hang Zhou Great Star Industrial Co.,LTD

For further assistance, visit the WORKPRO official websaịtị ma ọ bụ kpọtụrụ ndị ahịa ha ọrụ.