Voxelab Aquila D1 3D Printer Instruction Manual

1. Okwu mmalite

Thank you for choosing the Voxelab Aquila D1 3D Printer. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before assembly and use to ensure optimal performance and longevity of your printer.

Foto: Ofeview of the Voxelab Aquila D1 3D Printer.

2. Atụmatụ igodo

• 25-point Auto Leveling: The print head features an intelligent 25-point leveling system for automatic compensation of heat bed unevenness, simplifying operation for all users.
• PEI Spring Steel Platform: Equipped with a wear-resistant, bendable, and unbreakable PEI flexible removable steel plate. Its magnetic design allows for easy installation and tool-free model removal in approximately 3 seconds.
• Enhanced Print Speed: Achieves a maximum printing speed of 180mm/s (average 100mm/s), significantly improving efficiency while maintaining print quality.
• Increased Print Volume: Offers a print volume of 235x235x250mm, providing ample space for various printing needs, from animation characters to household goods.
• 32-bit Silent Mainboard: Operates at low decibel levels (average noise level of about 50 dB), ensuring a quiet printing environment.
• Dual-Gear Direct Extruder: Provides a strong wire feeding force of up to 70N, ensuring smoother filament feeding, especially for flexible filaments like TPU.
• X-axis, Y-axis Linear Guide: Utilizes linear guide rails for X and Y axes, offering motion accuracy of ±0.02mm, reducing surface texture issues from machine shaking, and enhancing print stability and detail.
• Z-axis High-precision Double Screw: Adopts a double screw synchronous operation to minimize printing wobbles, leading to more stable operation and reduced zeroing error.
• Sensọ Amamihe: Includes power failure recovery and filament run-out detection to prevent printing failures due to unexpected interruptions.
• Dual Cooling Adjustable Fans: Fan speed can be adjusted based on material temperature sensitivity for smoother wire feeding and improved model quality.
• High-Temp Printing: Supports printing with multiple filaments up to 300°C, including PLA, ABS, PETG, TPU, Wood, and PLA-CF.

3. Ihe ngwugwu

Upon unboxing, please verify that all components listed below are present and undamaged:

Foto: Zuru ezu view of the Voxelab Aquila D1 packing list.

• Aquila D1 (self-assembled) x1
• Eriri ike x1
• eriri eriri x1
• Needle x1
• Material rack x1
• Remove tool x1
• Storage card and card reader x1
• Wrenches and screwdrivers x1
• 50g Filament x1
• 0.6mm Nozzle x2
• 0.4mm Nozzle x1
• Ihe mkpuchi x1
• Diagonal pliers x1
• Glue stick x1
• Griiz x1
• Akwụkwọ ntuziaka onye ọrụ x1

4. Ntọala na Mgbakọ

The Voxelab Aquila D1 features a modular design for quick assembly. Follow these steps to set up your printer:

4.1 Ịkpọghe igbe na Mgbakọ Mbụ

Video: Unboxing and initial assembly guidance for the Aquila D1.

1. Wepu akụrụngwa: Carefully remove all equipment and spare parts from the packaging.
2. Attach Gantry: Lift the X-axis assembly and fix the gantry onto the base assembly using four M5X45 combination screws.
3. Install Nozzle Assembly: Cut the tape on the X-axis. Install the nozzle assembly onto the nozzle connector and secure it with 2 screws.
4. Fasten Extruder Cover: Place and fasten the extruder cover on the extruder. Align the holes and install the cover with two M3x6 round head screws.
5. Assemble Material Rack: Install the material pipe and nut onto the rack. Fix the assembled rack on the top profile with two M4X6 screws and two T-nuts.
6. Install Filament Sensor: Take out the filament sensor assembly from the tool kit. Pass the two screws through the sensor module mounting holes and then assemble them on the X-axis with an M3 hex wrench. Do not overtighten the screws, allowing the wire detection assembly to swing.
7. Tinye ihuenyo ngosi: Fix the display screen on the machine's right base with two M5X12 screws.
8. Jikọọ eriri: Connect the display screen cable, Z-axis motor cable, X-axis motor cable, X-axis switch cable, filament sensor cable, and nozzle cable.

Image: Visual guide for the 5-step quick assembly process.

5. Ntuziaka ọrụ

5.1 Power On and Initial Checks

1. Lelee Voltage: Before powering on, ensure the machine voltage is consistent with your local power supply.
2. Ike Na: Turn on the machine. Confirm that the back-to-zero function is working properly.

5.2 Auto-Leveling

The Aquila D1 features a 25-point intelligent auto-leveling system:

1. Navigate to the 'Control' menu on the display screen.
2. Select 'Auto-leveling' and follow the on-screen prompts. The printer will automatically probe 25 points on the print bed to compensate for any unevenness.

Image: The 25-point auto-leveling process in action.

5.3 Z-offset Calibration

After auto-leveling, perform Z-offset calibration for optimal first layer adhesion:

1. Place a piece of A4 paper under the nozzle.
2. On the display, click the down arrow key to slowly move the nozzle closer to the platform.
3. Continue adjusting until obvious resistance is felt when sliding the A4 paper back and forth between the nozzle and the platform.
4. Click the 'Back' key to complete the Z-offset calibration.

5.4 Ibunye eriri

Ensure the printer is preheated to the appropriate temperature for your filament type. Insert the filament into the extruder until it is gripped by the gears and begins to feed through the nozzle.

5.5 Ịmalite Mbipụta

Once leveled and filament is loaded, you can start printing:

1. Prepare your 3D model using slicing software (e.g., VoxelMaker, Cura, Simplify3D) and save it to the provided storage card.
2. Insert the storage card into the printer's card slot.
3. On the display, navigate to 'Print' and select your desired G-code file.
4. Confirm your selection to begin the printing process.

Video: Voxelab Aquila D1 in action, demonstrating its printing capabilities and ease of use.

6. Nlekọta

Regular maintenance ensures consistent print quality and extends the lifespan of your Voxelab Aquila D1:

• Clean Print Bed: After each print, allow the print bed to cool and carefully remove the printed object. Clean the PEI surface with isopropyl alcohol to remove any residue.
• Nhicha nozzle: Periodically clean the nozzle to prevent clogs. Use the provided needle to clear any blockages. For stubborn clogs, a cold pull or hot end disassembly may be required.
• Akụkụ Ntugharị mmanụ: Apply a small amount of grease to the Z-axis lead screws and linear guides every few months to ensure smooth movement.
• Ihe eji elele eriri: Ensure the X and Y-axis belts are properly tensioned. They should be taut but not overly tight.
• Mmelite femụwe: Check the official Voxelab website for any available firmware updates to improve performance and add new features.

7. Nchọpụta nsogbu

Nke a bụ ụfọdụ okwu nkịtị na ngwọta ha nwere ike ime:

• Nrachi nke oyi akwa mbụ na-adịghị mma: Ensure the print bed is clean, properly leveled, and the Z-offset is correctly calibrated. Increase bed temperature if necessary.
• Filament Not Extruding: Check for clogged nozzle, tangled filament, or incorrect extruder temperature. Ensure the extruder gears are gripping the filament.
• Layer Shifting: Verify that the printer is on a stable surface and that the X and Y-axis belts are properly tensioned. Check for any obstructions in the movement path.
• Print Quality Issues (e.g., stringing, blobs): Adjust retraction settings, print speed, and temperature in your slicing software. Ensure filament is dry.
• Igwe nbipute anaghị agba ọkụ: Check power cable connections and ensure the power switch is in the 'ON' position. Verify voltage setting matches local supply.

For more detailed troubleshooting, refer to the Voxelab support resources or contact customer service.

8. Nka na ụzụ nkọwa

9. Ozi nchekwa

• Na-eji igwe nbipute arụ ọrụ mgbe niile n'ebe ikuku na-anaghị eru.
• Debe igwe nbipute ahụ ka ọ ghara ịdị nso ihe ndị nwere ike ire ọkụ na ebe okpomọkụ dị.
• Do not touch the nozzle or heated bed during operation, as they reach high temperatures.
• Debe ụmụaka na anụ ụlọ n'ebe igwe nbipute ahụ dị anya mgbe ị na-arụ ọrụ.
• Kwupu ike mgbe niile tupu ime nrụzi ma ọ bụ ihicha ọ bụla.
• Use only recommended filaments and accessories.

10. Akwụkwọ ikike na nkwado

The Voxelab Aquila D1 3D Printer comes with a standard manufacturer's warranty. For specific warranty terms, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Voxelab website. You can also find additional resources and community support online.