Ntuziaka Onye Ọrụ Igwefoto Evolveo StrongVision Mini Trail

1. Okwu mmalite

Thank you for choosing the Evolveo StrongVision Mini Trail Camera. This compact and robust camera is designed for wildlife observation, hunting, and security applications, offering high-resolution photos and Full HD videos with night vision capabilities. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance.

Foto nke 1.1: N'ihu view of the Evolveo StrongVision Mini Trail Camera. The camera features a camouflage pattern, a main lens, and an upper display panel.

2. Ihe ngwugwu

Biko lelee ọdịnaya nke ngwugwu ahụ ka ị hụ na ihe niile dị:

• Evolveo StrongVision Mini Trail Camera
• Eriri mgbakwasị
• Micro SD kaadị Reader
• eriri USB
• Akwụkwọ ntuziaka onye ọrụ

Foto nke 2.1: Included accessories: Evolveo StrongVision Mini camera, mounting strap, USB cable, and user manual.

3. Ngwaahịa gafereview

The StrongVision Mini is a compact trail camera designed for ease of use and reliable performance. Key features include:

• Foto dị elu: Capture photos up to 20 MP and Full HD 1080p videos.
• Ọhụụ abalị infrared: Equipped with 26 850nm IR LEDs for clear night recordings up to 20 meters.
• Ọsọ Mmalite Ngwa Ngwa: Activates in just 0.8 seconds.
• Akụkụ nchọpụta sara mbara: 90° Passive Infrared (PIR) sensor for comprehensive coverage.
• Ihu igwe anaghị egbochi ya: IP65 rated for outdoor use in various conditions.
• Nha kọmpat: Dimensions of 105 x 85 x 40 mm for discreet placement.

Foto nke 3.1: The compact design of the Evolveo StrongVision Mini, suitable for discreet placement.

4. Nhazi

4.1. Ntinye batrị

The camera requires 4 x 1.5V LR6 AA batteries. For optimal performance and extended operation, it is recommended to use high-quality alkaline or rechargeable batteries.

1. Open the camera's latch on the side and gently open the housing.
2. Chọta ebe batrị.
3. Fanye batrị AA 4, na-eme ka polarity ziri ezi (+/-) dị ka egosiri n'ime ụlọ.
4. Mechie mkpuchi nke batrị batrị nke ọma.

4.2. Nwụnye Kaadị Micro SD

A Micro SD card (up to 32 GB) is required to store photos and videos. Ensure the card is formatted before first use.

1. With the camera housing open, locate the Micro SD card slot.
2. Tinye kaadị Micro SD n'ime oghere ahụ ruo mgbe ọ pịa ebe ọ dị.
3. Iji wepụ, gbanye kaadị ahụ ntakịrị ruo mgbe ọ pụtara.

Foto nke 4.1: Battery compartment and Micro SD card slot inside the camera.

4.3. Nhazi mmalite

The camera can be configured using a settings file on the Micro SD card via your computer. This allows for precise adjustment of parameters such as photo resolution, video resolution, time-lapse intervals, and more.

1. Insert the Micro SD card into your computer using the provided Micro SD card reader.
2. Nweta nhazi ahụ file (usually a text file or specific software) on the card.
3. Adjust desired settings according to your needs.
4. Chekwaa nhazi file back to the Micro SD card.
5. Safely eject the Micro SD card from your computer and insert it back into the camera.

4.4. Ịtinye igwefoto

Use the included mounting strap to secure the camera to a tree, pole, or other suitable surface. Ensure the camera is stable and pointed towards the desired monitoring area.

Foto nke 4.2: Akụkụ view of the camera showing external ports for connectivity.

5. Na-arụ ọrụ igwefoto

5.1. Ịgbanye / gbanyụọ

After installing batteries and the Micro SD card, locate the power switch inside the camera housing. Switch it to the "ON" position to activate the camera. To turn off, switch it to "OFF".

5.2. Ụdị arụ ọrụ

The camera supports various operating modes, which can be configured via the settings file:

• Foto mode: Captures still images. Resolutions include 20 MP, 16 MP, and 12 MP.
• Ụdị vidiyo: Records video clips. Resolutions include 1080p, 720p, and VGA.
• Ụdị foto + vidiyo: Captures a photo followed by a video clip.
• Ụdị nkwụsị oge: Takes photos at set intervals.

5.3. Motion Detection and Recording

The camera utilizes a Passive Infrared (PIR) sensor to detect motion. When motion is detected within its 90° field of view, the camera will trigger and record based on your configured settings.

• Ọsọ mkpata: The camera activates quickly, with a trigger speed of 0.8 seconds.
• Igwe ọkụ IR: For low-light or nighttime conditions, 26 850nm IR LEDs provide illumination up to 20 meters (optimal illumination 6-8 meters).
• Shot Series: Configure the number of photos taken per trigger (1, 3, 6, or 9 shots).
• Oge mgbake: Set the delay between triggers (1, 5, 10, or 30 seconds/minutes).

5.4. Viewing Files

Iji view captured photos and videos:

1. Turn off the camera and remove the Micro SD card.
2. Insert the Micro SD card into your computer using the card reader.
3. Nweta na files on the card. Photos are saved in JPEG format, and videos in AVI format.
4. Nke ọ bụla file will include a date and time stamp.

6. Nlekọta

6.1. Nhicha

Jiri ihe dị nro hichaa mpụta igwefoto ahụamp cloth. Ensure the lens and PIR sensor are clean and free from dirt or debris for optimal performance. Do not use harsh chemicals or abrasive cleaners.

6.2. Ngbanwe batrị

Replace batteries when the low battery indicator appears or when performance degrades. Always replace all batteries at once with new ones of the same type.

6.3. Nchekwa

When not in use for extended periods, remove the batteries to prevent leakage. Store the camera in a cool, dry place away from direct sunlight.

7. Nchọpụta nsogbu

• Igwefoto anaghị agba ọkụ:
  • Lelee polarity batrị.
  • Gbaa mbọ hụ na chajịrị batrị zuru oke ma ọ bụ dochie ya.
  • Nyochaa ngbanwe ọkụ dị na ọnọdụ "ON".
• No photos/videos recorded:
  • Ensure a Micro SD card is inserted and properly formatted.
  • Check if the Micro SD card is full.
  • Verify camera settings for recording mode and trigger sensitivity.
  • Ensure the PIR sensor is not obstructed.
• Ogo onyonyo/ vidiyo na-adịghị mma:
  • Hichaa oghere igwefoto.
  • Check resolution settings.
  • Ensure sufficient lighting for daytime shots; for night shots, ensure objects are within IR range.
• Ndụ batrị dị mkpụmkpụ:
  • Jiri alkaline dị elu ma ọ bụ batrị enwere ike ịchaji.
  • Reduce the number of photos per trigger or increase recovery time.
  • Consider external power options like the Evolveo solar panel (sold separately).

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Evolveo websaịtị. Debe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.

Onye nrụpụta: Ụgwọ nke ụlọ ọrụ Naxya Limited