AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery User Manual

1. Okwu mmalite

Thank you for choosing the AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery. This battery is designed to provide reliable power for your compatible AUTDER 21V tools, specifically the AD380 21V Tire Inflator and AUTDER 21V Chainsaw. This manual provides essential information for the safe and efficient use, maintenance, and storage of your battery.

Image 1.1: The AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery. This image displays the battery unit with its branding, voltage, and capacity markings, along with a charging port.

2. Ntuziaka nchekwa dị mkpa

Read all safety warnings and instructions before using the battery. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Ịchaji: Only use the AUTDER 21V compatible charger to charge this battery. Using an incompatible charger may cause fire or damage to the battery.
• Okpomọkụ: Do not charge or store the battery in temperatures below 0°C (32°F) or above 45°C (113°F). Avoid direct sunlight and extreme heat.
• Mmebi: Do not use a damaged or modified battery. Damaged batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Mkpughe mmiri: Do not expose the battery to water or rain. Water entering a battery may increase the risk of electric shock or fire.
• Circuit dị mkpirikpi: Do not short-circuit the battery terminals. Keep the battery away from metal objects that could make a connection between the terminals.
• mkpofu: Dispose of batteries properly according to local regulations. Do not dispose of batteries in household waste or by incineration.
• Ụmụaka: Debe batrị ka ụmụaka ghara iru ya.

3. Ihe ngwugwu

Hụ na ihe niile dị mgbe ị meghere ngwugwu ahụ:

• 1 x AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery (Model NC2030AM-UK)

Note: The compatible charger and tools are sold separately.

4. Nhazi

4.1 Ịchaji batrị

1. Connect the AUTDER 21V compatible charger to a standard power outlet.
2. Align the battery with the charger and slide it into place until it clicks securely.
3. Observe the charging indicator lights on the battery or charger. Typically, a red light indicates charging, and a green light indicates a full charge.
4. Once fully charged, disconnect the battery from the charger and unplug the charger from the power outlet.

Ojiji mbụ: It is recommended to fully charge the battery before its first use to ensure optimal performance and battery life.

4.2 Installing the Battery into a Tool

1. Ensure the tool is turned off before installing or removing the battery.
2. Align the battery with the battery slot on your compatible AUTDER 21V tool (e.g., AD380 Tire Inflator or 21V Chainsaw).
3. Slide the battery into the slot until it clicks firmly into place. Ensure it is fully seated and does not wobble.
4. To remove the battery, press the release button (if present) and slide the battery out of the tool.

Foto nke 4.1: Ọzọ view of the AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery. This image highlights the battery's design and the charging indicator lights, which are crucial for understanding its status.

5. Ntuziaka ọrụ

Once the battery is fully charged and securely installed in your compatible AUTDER 21V tool, you can begin operation.

5.1 Using with AUTDER AD380 Tire Inflator

1. Ensure the battery is fully charged and properly installed in the AD380 tire inflator.
2. Connect the inflator hose to the tire valve.
3. Set the desired pressure on the inflator's display.
4. Press the power button on the inflator to start inflation. The battery will provide power until the set pressure is reached or the inflator is turned off.
5. Monitor the battery level indicator on the battery or tool during extended use.

5.2 Using with AUTDER 21V Chainsaw

1. Ensure the battery is fully charged and properly installed in the 21V chainsaw.
2. Follow the chainsaw's specific operating instructions for starting, cutting, and safety.
3. The battery provides consistent power for cutting tasks.
4. Always check the battery level before starting a task to avoid interruptions.

6. Mmezi na Nchekwa

6.1 Ntuziaka Nchaji

• Do not overcharge the battery. Disconnect it once fully charged.
• Avoid completely draining the battery before recharging, as this can reduce its lifespan. Recharge when the power is low.
• Allow the battery to cool down before charging if it has been used extensively.

6.2 Ndụmọdụ Nchekwa

• Chekwaa batrị ahụ n'ebe dị jụụ, kpọrọ nkụ, pụọ na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
• Maka nchekwa ogologo oge, chajịa batrị ihe dịka 50-60% ikike.
• Remove the battery from the tool when not in use for extended periods.

6.3 Nhicha

• Use a clean, dry cloth to wipe the battery casing and terminals.
• Ejila ihe mgbaze ma ọ bụ ihe nchacha.
• Ensure terminals are free from dirt and debris for optimal connection.

7. Nchọpụta nsogbu

8. Nka na ụzụ nkọwa

9. Akwụkwọ ikike na nkwado ndị ahịa

AUTDER products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your original purchase or visit the official AUTDER websaịtị.

If you encounter any issues or have questions about your AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery, please contact AUTDER customer support through the contact information provided on our official website or your purchase platform. Please have your model number (NC2030AM-UK) and purchase details ready when contacting support.