Trevi XR Jump Amplified Bluetooth Speaker XR 8A30 User Manual

Okwu mmalite

This manual provides detailed instructions for the safe and efficient use of your Trevi XR Jump Amplified Bluetooth Speaker, model XR 8A30. Please read this manual thoroughly before operating the device and retain it for future reference.

The Trevi XR Jump XR 8A30 is a portable amplified speaker designed for wireless audio playback from Bluetooth-enabled devices. It features True Wireless Stereo (TWS) functionality for connecting two speakers, a built-in microphone for hands-free calls, and multiple input options including USB and AUX-IN. The speaker is also water-resistant, making it suitable for various outdoor activities.

Ngwaahịa gafereview

Akụkụ ndị bụ isi:

• 20W Ampụda dị elu: Delivers powerful audio output.
• Njikọ Bluetooth: Ngwugwu ikuku na-enweghị nsogbu site na ngwaọrụ dakọtara.
• Ezi stereo ikuku ikuku (TWS): Connect two XR Jump speakers for enhanced stereo sound.
• USB playback: Play music directly from a USB drive.
• Ọdụ ụgbọ mmiri AUX-IN Wired connection for non-Bluetooth devices.
• Igwe okwu arụnyere n'ime ya: Enables hands-free phone calls.
• Nhazi na-eguzogide mmiri: Suitable for outdoor use and protection against splashes.
• Enwere ike ibugharị: Compact and lightweight with an included carrying rope.

Ọdịnaya ngwugwu:

• Trevi XR Jump Amplified Bluetooth Speaker (Model XR 8A30)
• Carrying Rope
• USB Chaja eriri (assumed to be included for charging)
• AUX-IN Cable (assumed to be included for wired audio connection)
• Akwụkwọ ntuziaka onye ọrụ (Akwụkwọ a)

Foto: N'ihu view of the Trevi XR Jump speaker, showcasing its cylindrical design and integrated RGB lighting on the sides.

Melite

Ịchaji ọkà okwu:

1. Locate the charging port (typically USB-C or Micro-USB) on the speaker.
2. Jikọọ eriri USB chaja enyere na ọdụ chaja nke ọkà okwu.
3. Jikọọ nsọtụ nke ọzọ nke eriri USB na ihe nkwụnye ọkụ USB dakọtara (anaghị etinye ya) ma ọ bụ ọdụ ụgbọ USB nke kọmputa.
4. The charging indicator light will illuminate, typically red, during charging.
5. Once fully charged, the indicator light will change color (e.g., turn off or turn blue/green). A full charge provides approximately 500 hours of standby time, actual playback time varies.

Mara: Maka ndụ batrị kacha mma, chajie ọkà okwu n'ụzọ zuru ezu tupu ejie ya mbụ.

Ịgbanyụ/ Gbanyụọ:

• To power on, press and hold the Power button (Ⓢ) ruo sekọnd ole na ole ruo mgbe ị nụrụ mkpọtụ a na-anụ ma ọ bụ hụ ka ọkụ ngosi ahụ na-arụ ọrụ.
• To power off, press and hold the Power button (Ⓢ) again for a few seconds until the indicator lights turn off.

Foto: N'azụ view of the Trevi XR Jump speaker, displaying the control buttons (volume, power, mode) and input ports (USB, AUX-IN, charging port).

Ntuziaka ọrụ

1. Njikọ Bluetooth:

1. Ensure the speaker is powered on and in Bluetooth pairing mode. The Bluetooth indicator light will typically flash rapidly.
2. On your mobile device (smartphone, tablet, PC), enable Bluetooth and search for available devices.
3. Select "Trevi XR Jump" or "XR 8A30" from the list of found devices.
4. Once paired, the speaker will emit an audible confirmation, and the Bluetooth indicator light will stop flashing and remain solid.
5. Ị nwere ike ugbu a kpọọ ụda site na ngwaọrụ gị site na ọkà okwu.

Mara: The Bluetooth range is approximately 10 meters (33 feet). Obstacles may reduce this range.

2. Ezi ọrụ stereo ikuku ikuku (TWS):

TWS allows you to connect two Trevi XR Jump speakers wirelessly for a stereo audio experience.

1. Ensure both XR Jump speakers are powered on and not connected to any Bluetooth device.
2. On one of the speakers (this will be the primary speaker), press and hold the TWS button (often indicated by a ∑ or similar icon) for a few seconds.
3. The speaker will enter TWS pairing mode, and you will hear a prompt.
4. The two speakers will automatically connect to each other. Once connected, you will hear another confirmation sound.
5. Now, pair your mobile device to the primary speaker via Bluetooth as described in the "Bluetooth Pairing" section.
6. Audio will now play in stereo across both speakers.

Mara: TWS mode only works with two identical Trevi XR Jump XR 8A30 speakers.

3. USB playback:

1. Fanye draịva USB nwere ọdịyo MP3 files banye n'ọdụ ụgbọ mmiri USB na ọkà okwu.
2. The speaker should automatically detect the USB drive and begin playing music. If not, press the Mode button (M) to switch to USB mode.
3. Use the speaker's control buttons to play/pause, skip tracks, and adjust volume.

4. AUX-IN Playback:

1. Connect one end of a 3.5mm audio cable (not included) to the AUX-IN port on the speaker.
2. Connect the other end of the 3.5mm audio cable to the headphone jack or audio output of your external device.
3. Pịa bọtịnụ Mode (M) on the speaker to switch to AUX-IN mode.
4. Play audio from your external device. Volume can be controlled via both the speaker and the external device.

5. Hands-free Calling:

When connected to your smartphone via Bluetooth, the speaker can be used for hands-free calls.

• Na-aza oku: When a call comes in, press the Play/Pause button (▶) once to answer.
• Ịkwụsị oku: During a call, press the Play/Pause button (▶) once to end the call.
• Ịjụ oku: When a call comes in, press and hold the Play/Pause button (▶) for a few seconds to reject the call.
• Na-emegharị nọmba ikpeazụ: In standby mode, double-press the Play/Pause button (▶) ka ịkpọgharịa nọmba ikpeazụ.

6. Njikwa:

The speaker features intuitive controls, typically located on the top or rear panel.

• bọtịnụ ike (Ⓢ): Pịa ma jide ka ịgbanwuo/ gbanyụọ.
• Bọtịnụ Kwụsị/ Kwụsị (▶): Press to play or pause music. Also used for call management.
• Volume Up (+) / Next Track: Pịa obere oge maka elu olu. Pịa ogologo oge maka egwu na-esote.
• Volume Down (-) / Previous Track: Pịa obere oge maka mbelata olu. Pịa ogologo oge maka egwu gara aga.
• Bọtịnụ ọnọdụ (M): Press to switch between Bluetooth, USB, and AUX-IN modes.
• TWS Button (∑): Pịa ma jide iji malite njikọta TWS.
• bọtịnụ Ụdị ọkụ (☀): Press to cycle through different RGB lighting effects or turn them off.

Nlekọta

• Nhicha: Use a soft, dry cloth to clean the speaker's surface. Do not use abrasive cleaners, alcohol, or chemical solvents.
• Nguzogide mmiri: The speaker is water-resistant, but not fully waterproof. Avoid submerging it in water. Ensure all port covers are securely closed before exposure to water.
• Nchekwa: Chekwaa ọkà okwu n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
• Nlekọta batrị: To prolong battery life, avoid fully discharging the battery frequently. Recharge the speaker regularly, even if not in use for extended periods.
• Ijikwa: Zere idobe ọkà okwu ma ọ bụ idobe ya na mmetụta siri ike.

Nchọpụta nsogbu

Nkọwapụta

• Ụdị: XR 8A30
• Ike mmepụta: 20W
• Njikọta: Bluetooth, USB, AUX-IN
• Ogologo Bluetooth: Ruo mita 10 (ụkwụ 33)
• Ụkpụrụ mmepụta ụda: Stereo
• Ụdị ọkà okwu: Woofer
• Tweeter Driver Diameter: 1 inch
• Igwe okwu: 1 (Built-in for hands-free calls)
• Ihe ọkpụkpọ MP3: Ee (site na USB)
• Ọkwa Nguzogide mmiri: Water-resistant (material resistant to water)
• Usoro njikwa: Touchpad, App
• Average Battery Life (Standby): Awa 500
• Akụkụ (D x W x H): 5 cm x 5 cm x 20 cm (ihe dị ka 2 x 2 x 7.9 inch)
• Arọ: 626 Grams (ihe dị ka 1.38 lbs)
• Eji akwadoro: For smartphones or tablets, various outdoor activities, pool entertainment, travel.
• Ihe: Ihe na-egbochi mmiri
• GTIN: 08011000028538

Akwụkwọ ikike na nkwado

Your Trevi XR Jump Amplified Bluetooth Speaker XR 8A30 comes with a Akwụkwọ ikike nke onye nrụpụta ọnwa iri na abụọ from the date of purchase. This warranty covers manufacturing defects and material faults under normal use.

Akwụkwọ ikike anaghị ekpuchi:

• Damage caused by improper use, negligence, or accidents.
• Nkịtị iyi na akwa.
• Mmebi kpatara nrụzi ma ọ bụ mgbanwe na-akwadoghị.
• Damage from exposure to extreme conditions beyond the product's specifications (e.g., full submersion in water).

For warranty claims or technical support, please contact Trevi customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number (XR 8A30) ready.

For more information, visit the official Trevi websaịtị: www.trevi.it