AIDA Imaging PTZ-NDI-X18B Broadcast NDI|HX FHD NDI/IP/HDMI 18X Zoom PTZ Camera User Manual

Okwu mmalite

This manual provides detailed instructions for the setup, operation, and maintenance of your AIDA Imaging PTZ-NDI-X18B Broadcast NDI|HX FHD NDI/IP/HDMI 18X Zoom PTZ Camera. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

Foto 1: N'ihu view of the AIDA Imaging PTZ-NDI-X18B Camera, showcasing its compact design and NDI|HX branding.

Kedu ihe dị na Igbe ahụ

• AIDA Imaging Full HD NDI|HX Broadcast PTZ Camera with 18x Optical Zoom (Black)
• Njikwa anya
• Ihe nkwado nkwado igwefoto
• Ihe nkwụnye ọkụ
• Igwe ọkụ ọkụ
• Ozi akwụkwọ ikike afọ 2 nwere oke

Melite

Follow these steps to set up your PTZ camera for initial use.

1. Iwepu: Carefully remove all components from the packaging. Verify that all items listed in "What's in the Box" are present.
2. Ịkwanye: The camera supports wall mounting. Use the provided camera mounting bracket to securely install the camera in your desired location. Ensure the mounting surface is stable and can support the camera's weight.
3. Njikọ ike: Connect the power adapter to the camera's DC12V input port and then plug the power cable into a suitable power outlet.
4. Njikọ mmepụta vidiyo:
   • Ihe mmepụta HDMI: Connect an HDMI cable from the camera's HDMI port to your display or video switcher.
   • IP/NDI Output: Connect an Ethernet cable from the camera's NDI/IP port to your network switch or router. This enables NDI|HX streaming and IP control.
5. Ntinye ọdịyo (Nhọrọ): If external audio is required, connect an audio source to the "Line in" port.
6. Control Connections (Optional): For RS232 control, connect appropriate cables to the IN-RS232-OUT ports.

Ọgụgụ 2: N'azụ view of the camera showing connection ports including RS232, HDMI, Line In, NDI/IP, and DC12V power input.

Ntuziaka ọrụ

This section details the basic operation of the PTZ-NDI-X18B camera.

Ịgbanyụ/ Gbanyụọ

Once connected to power, the camera will automatically power on. To power off, disconnect the power cable.

Pan, Tilt, and Zoom (PTZ) Control

The camera features pan, tilt, and 18x optical zoom capabilities. Control can be achieved via the included remote control or through NDI|HX protocol over the network.

• Njikwa anya: Use the directional buttons on the remote to pan and tilt the camera. Use the zoom buttons to adjust the 18x optical zoom.
• NDI|HX Control: Connect the camera to an NDI-compatible network. Use NDI-enabled software or hardware controllers to remotely control pan, tilt, and zoom functions with low latency.

Mmepụta vidiyo

The camera provides simultaneous IP and HDMI outputs. This allows for flexible integration into various production workflows.

• HDMI: Provides a direct Full HD video feed to a monitor or switcher.
• NDI|HX: Streams Full HD video and audio over your network with low latency, compatible with NDI-enabled devices and software.

Image Quality Features

The camera utilizes a Full HD Progressive Scan sensor and an advanced digital image processor to deliver sharp, vivid images. It also includes a motion-compensated temporal noise reduction filter for clear video even in challenging lighting conditions.

Nlekọta

Ndozi nke ọma na-eme ka ọ dị ogologo ndụ yana ịrụ ọrụ kacha mma nke igwefoto gị.

• Nhicha: Use a soft, dry cloth to clean the camera body. For the lens, use a specialized lens cleaning cloth and solution. Avoid harsh chemicals or abrasive materials.
• Mmelite femụwe: Periodically check the AIDA Imaging website for firmware updates. Keeping the firmware current can improve performance and add new features.
• Ọnọdụ gburugburu: Operate the camera within recommended temperature and humidity ranges. Avoid exposing the camera to extreme temperatures, moisture, or dust.

Nchọpụta nsogbu

If you encounter issues with your camera, refer to the following common problems and solutions.

• Enweghị ike:
  • Hụ na e jikọtara ihe nkwụnye ọkụ eletrik ahụ nke ọma na igwefoto ahụ na ebe ọkụ eletrik na-arụ ọrụ.
  • Verify the power cable is not damaged.
• No Video Output (HDMI):
  • Check the HDMI cable connection at both the camera and the display/switcher.
  • Try a different HDMI cable or input port on your display.
  • Ensure the display is set to the correct input source.
• No Video Output (NDI/IP):
  • Verify the Ethernet cable is securely connected and the network is active.
  • Ensure your NDI-compatible software or hardware is properly configured to detect NDI sources on the network.
  • Check the camera's IP settings (refer to advanced network configuration documentation if needed).
• PTZ Control Not Responding:
  • For remote control, ensure batteries are functional and there are no obstructions.
  • For NDI|HX control, verify network connectivity and NDI control software settings.
• Ogo onyonyo adịghị mma:
  • Ensure the lens is clean and free of dust or smudges.
  • Check lighting conditions in the environment.
  • Verify camera settings (e.g., exposure, white balance) are appropriate for the current environment.

If the problem persists, please contact AIDA Imaging customer support.

Nkọwapụta

Akwụkwọ ikike na nkwado

Ozi akwụkwọ ikike

This AIDA Imaging PTZ-NDI-X18B camera comes with a Limited 2-Year Warranty. Please refer to the warranty card included in your product packaging for full terms and conditions.

Nkwado ndị ahịa

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact AIDA Imaging customer support through their official websaịtị ma ọ bụ ozi kọntaktị enyere na ịzụrụ gị.

Websaịtị: www.aidaimaging.com