CREWORKS 10L Professional Ultrasonic Cleaner User Manual

1. Okwu mmalite na gafereview

The CREWORKS 10L Professional Ultrasonic Cleaner is designed for effective cleaning of various items such as jewelry, eyeglasses, coins, and makeup brushes. It features 240W ultrasonic power, a 40 kHz frequency, and 300W heating. This manual provides essential information for the safe and efficient operation of your ultrasonic cleaner.

Akụkụ ndị bụ isi:

• 10L ike: Generous tank volume for various cleaning tasks.
• 240W Ultrasonic Power & 40 kHz Frequency: Provides powerful and efficient cleaning action.
• 300W Heating Function: Accelerates the cleaning process by assisting in dirt removal.
• Degas Mode: Quickly removes gas bubbles from cleaning solutions and porous objects, enhancing cavitation efficiency.
• Ụdị dị nro: Reduces ultrasonic power by half for protective cleaning of delicate items.
• Ogwe njikwa kensinammuo: Easy adjustment of cleaning duration (up to 30 minutes) and temperature (0-80℃).
• Ihe owuwu na-adịgide adịgide: Made with 304 stainless steel tank and basket for prolonged use and compliance with food safety standards.

The CREWORKS 10L Professional Ultrasonic Cleaner, showcasing its robust stainless steel construction and user-friendly digital interface.

2. Ozi nchekwa

Please read all safety instructions carefully before operating the ultrasonic cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Jikọọ ngwaọrụ ahụ na ebe a na-etinye ọkụ eletrik n'ala mgbe niile.
• Do not operate the unit without liquid in the tank.
• Ejila akụkụ bụ isi na mmiri ma ọ bụ mmiri mmiri ndị ọzọ.
• Debe unit ahụ ka ụmụaka ghara iru ya.
• Ejila mmiri mmiri emetụ plọg ọkụ ahụ aka.
• Kwupu ngwa ngwa tupu ihicha ma ọ bụ rụkwaa ya.
• Ensure proper ventilation during operation, especially when using cleaning solutions.
• Zere iji ngwọta nhicha na-ere ọkụ ma ọ bụ nke na-emebi emebi.
• Akpọsakwala otu ahụ. Tụtụ aka na ndị ọrụ ruru eru.

3. Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu:

• CREWORKS 10L Professional Ultrasonic Cleaner Unit
• Stainless Steel Cleaning Basket
• Igwe anaghị agba nchara
• Ụdọ ọkụ
• Akwụkwọ ntuziaka onye ọrụ

4. Ngwaahịa gafereview / Akụkụ

Familiarize yourself with the main components of your ultrasonic cleaner.

Zuru ezu view of the intuitive digital control panel, allowing precise adjustments for temperature, cleaning time, and activation of specialized cleaning modes.

Isi ihe:

• Tank igwe anaghị agba nchara: Holds the cleaning solution and items.
• Ogwe njikwa dijitalụ: For setting time, temperature, and modes.
• Ihe kpo oku: Warms the cleaning solution.
• Ultrasonic Transducers: Generate ultrasonic waves.
• Igbapu Valve: For easy draining of the tank.
• Ihe mkpuchi: Reduces noise and prevents splashing.
• Nkata nhicha: Holds items during cleaning, keeping them off the tank bottom.

5. Nhazi

1. Nkwanye: Place the ultrasonic cleaner on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit.
2. Njikọ ike: Jikọọ eriri ọkụ eletrik na unit ahụ wee jikọọ na ebe a na-etinye ọkụ eletrik n'ala.
3. Jupụta tank: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Do not exceed the 'MAX' fill line. Ensure the items to be cleaned will be fully submerged.
4. Insert Basket and Items: Place the cleaning basket into the tank. Carefully place the items to be cleaned into the basket, ensuring they do not touch each other or the bottom of the tank directly.
5. Mechie mkpuchi: Close the lid to reduce noise and prevent splashing during operation.

6. Ntuziaka ọrụ

Follow these steps to operate your CREWORKS ultrasonic cleaner:

1. Ike Na: Plug in the unit. The digital display will illuminate.
2. Tọọ okpomọkụ (nhọrọ): Press the 'TEMP' button to adjust the desired heating temperature (0-80℃). The unit will begin heating the solution. Heating can accelerate the cleaning process.
3. Activate Degas Mode (Recommended): For optimal cleaning, especially with new solutions or porous items, press the 'DEGAS' button. This mode removes air bubbles from the solution, improving ultrasonic efficiency. Run for 1-2 minutes.
4. Debe Oge Nhicha: Press the 'TIME' button to set the desired cleaning duration (1-30 minutes).
5. Họrọ Ụdị nhicha:
   • Ọkọlọtọ nhicha: Simply start the unit after setting time and temperature.
   • Ụdị dị nro: For delicate items, press the 'GENTLE' button. This reduces ultrasonic power by half to prevent damage.
6. Malite ihicha: Press the 'ON/OFF' button to start the ultrasonic cleaning process. The timer will count down.
7. Ọgwụgwụ okirikiri: The unit will automatically stop when the timer reaches zero. You can manually stop the process at any time by pressing the 'ON/OFF' button.
8. Wepu ihe: Carefully open the lid and use the basket to lift the cleaned items out of the tank. Rinse items with clean water if necessary and dry them thoroughly.
9. Tankị mmiri mmiri: After cleaning, unplug the unit. Open the drain valve to empty the used cleaning solution into a suitable container. Close the valve once empty.

Visual explanation of how ultrasonic waves create and collapse microscopic bubbles, providing thorough cleaning even in hard-to-reach areas.

Understanding the Degas mode for optimizing cleaning solution and the Gentle mode for safely cleaning fragile objects.

Visual demonstration of the cleaning effectiveness, showing items before and after ultrasonic treatment.

7. Nlekọta

Mmezi kwesịrị ekwesị na-eme ka onye na-ehicha ihe nhicha ultrasonic gị dị ogologo ndụ na arụmọrụ kachasị mma.

• Na-ehicha tank ahụ: After each use, drain the tank and rinse it with clean water. Wipe the interior and exterior with a soft, damp akwa . Ejila ihe mkpocha abrasive ma ọ bụ ajị nchara.
• Mwepu (ọ bụrụ na ọ dị mkpa): If mineral deposits build up in the tank, use a mild descaling solution specifically designed for stainless steel, following the product instructions.
• Nchekwa: Hụ na ihe eji arụ ọrụ a kpọrọ nkụ kpamkpam tupu e debe ya. Debe ya n'ebe dị jụụ ma kpọọ nkụ, ebe anwụ na-anaghị apụta kpọmkwem ma ọ bụ oke okpomọkụ.
• eriri ike: Inspect the power cord regularly for any signs of damage. If damaged, contact customer support for replacement.

8. Nchọpụta nsogbu

Ọ bụrụ na ịnwee nsogbu ọ bụla, rụtụ aka na ntuziaka nchọpụta nsogbu ndị a:

If the problem persists after attempting these solutions, please contact CREWORKS customer support.

9. Nkọwapụta

Technical specifications for the CREWORKS 10L Professional Ultrasonic Cleaner:

Visual representation of the ultrasonic cleaner's overall dimensions (37x27x30 cm) and the internal tank (30x24x17 cm) and basket (27x21x15 cm) measurements.

10. Akwụkwọ ikike na nkwado

CREWORKS products are manufactured to high-quality standards and are warranted against manufacturing defects. Please refer to the warranty card included with your purchase for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact CREWORKS customer service through the retailer where the product was purchased or visit the official CREWORKS websaịtị maka ozi kọntaktị.