Ikea BAGGANAS 703.384.18 Stainless Steel Handle Instruction Manual

1. Ngwaahịa gafereview

The Ikea BAGGANAS 703.384.18 is a set of two stainless steel handles designed for cabinets and drawers. These handles offer a modern and clean aesthetic, suitable for various interior styles. Each handle measures 143mm in length and features a durable stainless steel finish.

• Set includes 2 BAGGANAS handles.
• Dimensions: Length 143 mm, Width 9 mm, Depth 31 mm.
• Required drilled hole diameter: 5 mm.
• Hole spacing (center-to-center): 128 mm.
• Finish: Stainless steel.

2. Ozi nchekwa

Please read all instructions carefully before installation. Keep small parts and packaging materials away from children. Always use appropriate safety gear, such as eye protection, when drilling. Ensure the mounting surface is suitable for drilling and can support the handle securely.

3. Ihe ngwugwu

• 2 x Ikea BAGGANAS Handles (Model: 703.384.18)
• Mounting screws (typically included with Ikea handles)

4. Ntọala na nwụnye

Ngwa achọrọ:

• Pensụl
• Ihe teepu ma ọ bụ onye na-achị achị
• Gwuo ya site na olulu mmiri 5 mm
• Screwdriver (appropriate for the provided screws)

Nzọụkwụ nwụnye:

1. tụọ na Kaa: Determine the desired position for your handle on the cabinet door or drawer front. Using a measuring tape and pencil, mark two points 128 mm apart (center-to-center) where the screws will go. Ensure the marks are level and centered as desired.
2. Oghere pilot: Carefully drill pilot holes at the marked points using a 5 mm drill bit. Drill straight through the material to avoid splintering.
3. Tinye aka: Align the handle with the drilled holes. Insert the mounting screws from the inside of the cabinet door or drawer and thread them into the handle.
4. Mechie skru: Using a screwdriver, tighten the screws until the handle is firmly secured. Do not overtighten, as this can damage the cabinet material or the handle.

This image displays the Ikea BAGGANAS handle, highlighting its sleek stainless steel finish and rectangular design. The handle measures 143mm in length and is ready for installation.

5. .rụ ọrụ

Once installed, the BAGGANAS handle functions as a pull for opening and closing cabinet doors or drawers. Grip the handle firmly and apply gentle force to operate the furniture component.

6. Nlekọta na nlekọta

To maintain the appearance and longevity of your stainless steel handles, follow these care instructions:

• Nhicha: Wipe the handles regularly with a soft cloth dampejiri mmiri tinye ya ma ọ bụ ihe ngwọta dị nro na-adịghị emebi emebi.
• Zere kemịkalụ siri ike: Do not use abrasive cleaners, steel wool, or chemical solvents, as these can scratch or damage the stainless steel finish.
• ihicha: Dry the handles immediately after cleaning to prevent water spots.

7. Nchọpụta nsogbu

• Aka rụrụ arụ: If the handle becomes loose, gently tighten the mounting screws from the inside of the cabinet or drawer using an appropriate screwdriver. Do not overtighten.
• Ọkpụkpụ: Minor surface scratches on stainless steel may sometimes be reduced using a specialized stainless steel polish and a soft cloth, following the product's instructions. Deep scratches may require professional attention or replacement.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

For information regarding warranty coverage or product support, please refer to your purchase receipt or contact the retailer where the product was purchased. You may also visit the official Ikea website for general customer service and support information.