1. Okwu mmalite
This manual provides essential information for the safe and efficient use of your EMITEVER 24V Power Supply. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Ihe ngwugwu 1.1
- 1 x 60W DC Power Supply
1.2 Ngwaahịa gafereview
The EMITEVER 24V Power Supply is a UL-Listed 60W LED power adapter designed to convert 100-240V AC input to a stable 24V DC output at 2.5A. It is suitable for various low-voltage applications, including LED strip lights, CCTV cameras, and other 24V devices requiring up to 60 watts of power.
Image 1.1: The EMITEVER 24V 60W LED Power Adapter, including the main unit, AC power cord, and a DC connector adapter.
2. Ozi nchekwa
2.1 Ntuziaka nchekwa dị mkpa
- Ensure your device operates at 24V and requires under 60W to prevent damage, flickering, or overheating.
- This power supply does not have charging or dimming functions. For dimming, use an external PWM controller at the DC end.
- The product has an IP30 rating, making it suitable for dry indoor environments only. Avoid exposure to moisture or water.
- Emeghela ọkụ ọkụ casing. Enweghị akụkụ ndị ọrụ ga-arụ ọrụ n'ime.
- Debe ebe ụmụaka na-apụghị iru.
- Disconnect power before making any connections or disconnections.
2.2 UL Certified Protection
This 24V Power Adapter is cUL Listed, indicating compliance with rigorous safety standards. It incorporates comprehensive protection mechanisms to ensure device safety and longevity:
- Nchekwa na-adị ugbu a: Prevents damage from excessive current draw.
- Nchekwa sekit dị mkpụmkpụ: Automatically shuts off power in case of a short circuit.
- Nchekwa oke ọkụ: Prevents the adapter from reaching unsafe temperatures.
Image 2.1: Internal component comparison illustrating the quality and safety features, including UL certification, of the EMITEVER power supply.
3. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ntinye Voltage | AC AC 100-240V |
| Ugboro ntinye | 50/60Hz |
| Mmepụta Voltage | 24V DC (Constant Voltage) |
| Mmepụta Max Ugbu A | 2.5 Amps |
| Ike kacha mma | 60 Watt |
| DC Jack Size | 5.5 x 2.1mm (Inner Positive, Outer Negative) |
| Ogo IP | IP30 (naanị ime ụlọ) |
| Akụkụ ngwaahịa | 4.7"D x 2.1"W x 1.2"H (11.9cm x 5.3cm x 3.0cm) |
| Ibu | 10.55 ounces (ihe dị ka 300g) |
| Isi Iyi Ike | Igwe ọkụ eletrik |
| Ụdị nkwụnye | Wall Mount (via AC plug) |
| Asambodo | cUL edepụtara |
Image 3.1: Physical dimensions and cable lengths of the EMITEVER 24V 60W power supply.
4. Ntọala & nwụnye
4.1 Tupu echichi
- Verify that your device requires a 24V DC power input.
- Confirm that the total wattage required by your connected devices does not exceed 60W.
- Ensure the installation environment is dry and free from moisture.
4.2 Ụzọ njikọ
The EMITEVER 24V Power Supply offers two primary methods for connecting to your devices:
- Direct DC Jack Connection:
Connect the power supply's DC output plug (5.5 x 2.1mm) directly into a compatible DC input jack on your device. This is a plug-and-play method requiring no additional wiring. - Njikọ Mgbochi ọnụ:
For devices that require bare wire connections, use the included DC connector to terminal block adapter. Loosen the screws on the terminal block, insert the positive and negative wires from your device, and then tighten the screws. Ensure correct polarity (Inner Positive, Outer Negative for the DC jack).
Image 4.1: Visual guide to the two available connection methods for the power supply.
Foto 4.2: Zuru ezu view of the 5.5 x 2.1mm DC output size and polarity.
4.3 ndakọrịta
This power supply is compatible with a wide range of 24V DC devices that require up to 60 watts of power, including but not limited to:
- EMITEVER LED strip lights, modules, light bars, and cabinet lights
- Ọkụ n'ọdịdị ala
- Ndị na-anya ikuku ikuku
- Small 3D printers
- Igwefoto nchekwa
- Other 24V devices under 60 watts
5. Ntuziaka ọrụ
After ensuring all connections are secure and correct, plug the AC power cord into a standard 100-240V wall outlet. The power supply will begin to deliver 24V DC power to the connected device. A green indicator light on the adapter will illuminate when power is active.
The start-up time for the power supply can take 1-3 seconds to stabilize the output and extend its operational life. No further user interaction is required for basic operation.
Image 5.1: The power supply in operation, providing stable power to an LED strip light.
6. Nlekọta
- Nhicha: Disconnect the power supply from the wall outlet and all connected devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or sprays.
- Nchekwa: Store the power supply in a cool, dry place away from direct sunlight and moisture when not in use.
- Nyocha: Periodically inspect the power cords and the adapter casing for any signs of damage. If damage is found, discontinue use and replace the unit.
7. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Device not lighting up / No power | Vol ezighi ezitage (not 24V) Ngwaọrụ wattage exceeds 60W Njikọ rụrụ arụ Ntinye ezighi ezi Ike ọkọnọ ọdịda | Lelee olu ngwaọrụtage na wattage chọrọ. Lelee njikọ niile echekwara. Jiri ngwaọrụ ọzọ nwalee oghere mgbidi ahụ. Replace the power supply if it's faulty. |
| Ọkụ na-egbuke egbuke | Ngwaọrụ wattage exceeds 60W Njikọ rụrụ arụ Ngwa na-adabaghị adaba | Gbaa mbọ hụ na mkpokọta wattage dị n'okpuru 60W. Lelee njikọ. Confirm device compatibility with a 24V constant voltage ọkọnọ. |
| Power supply is hot | Overload (device wattagoke elu) Igwe ikuku na-adịghị mma | Reduce load to under 60W. Ensure adequate airflow around the power supply. If overheating persists, discontinue use. |
| Green indicator light not on | Enweghị ike ntinye AC Mmejọ nke ime | Check AC power cord connection and wall outlet. If power is present at the outlet, the power supply may be faulty and require replacement. |
8. Akwụkwọ ikike & Nkwado
EMITEVER provides a 3-year worry-free service for this product. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
For warranty claims or technical support, please contact EMITEVER customer service through the retailer where the product was purchased or visit the official EMITEVER websaịtị maka ozi kọntaktị.