XINJIA Electronic Voice Watch User Manual

Okwu mmalite

This manual provides comprehensive instructions for the XINJIA XJ-768 Electronic Voice Watch, designed for individuals with visual impairments, middle-aged, and elderly users. It features English voice prompts, an alarm clock, and a large digital display for ease of use. Please read this manual thoroughly to understand the watch's functions and ensure proper operation.

Foto 1: N'ihu view of the XINJIA XJ-768 Electronic Voice Watch.

Njirimara ngwaahịa

• Ngosipụta oge: Clearly displays the current time and allows for easy time setting.
• Ọrụ mkpu: Provides customizable alarm settings with the option to change the alarm tone.
• Timekeeping Function: Features a 'TALKING' button to broadcast the current time and an automatic hourly timekeeping function that can be toggled on or off.
• Ọrụ Sooze: Allows for a temporary pause of the alarm, with the alarm sounding again after 5 minutes.
• Enwerekwa ike iji: Designed with a larger font display, increased volume, and simplified operation for improved accessibility.

Melite

Initial Battery Installation

The XINJIA XJ-768 watch comes with one LR44 battery included. Before initial use, ensure the battery is properly seated. If the display is blurred or the watch is unresponsive, the battery may need to be replaced. Refer to the 'Battery Replacement' section for detailed instructions.

Ntuziaka ọrụ

The watch features four primary buttons for operation: B1 (MODE), B2 (MINUTE), B3 (HOUR), na B4 (TALKING). These buttons are located on the sides of the watch case.

Foto 2: Akụkụ view illustrating the watch buttons.

1. Isetịpụ Oge

1. Site na ọnọdụ ngosipụta oge nkịtị, pịa pịa B1 (MODE) button once. The time digits will begin flashing.
2. Pịa B2 (MINUTE) bọtịnụ ka ịhazie nkeji.
3. Pịa B3 (HOUR) bọtịnụ iji dozie awa.
4. Ozugbo edobere oge ziri ezi, pịa B1 (MODE) again to exit time setting mode.

2. Ịtọ oge mkpu

1. Site na ọnọdụ ngosipụta oge nkịtị, pịa pịa B1 (MODE) button twice. The display will show the 'AL' symbol, and the alarm time digits will flash.
2. Pịa B2 (MINUTE) bọtịnụ iji tọọ nkeji mkpu achọrọ.
3. Pịa B3 (HOUR) button to set the desired alarm hours.
4. Ozugbo edobere oge mkpu ahụ, pịa B1 (MODE) again to exit alarm setting mode.

3. Selecting Alarm Tone and Turning Alarm On/Off

1. Site na ọnọdụ ngosipụta oge nkịtị, pịa pịa B3 (HOUR) bọtịnụ.
2. Each press will cycle through alarm tone options and toggle the alarm function on or off.
3. When the alarm is set to ON, the alarm will sound at the set time, and the LCD will display the alarm time. After the alarm plays, the normal time will be displayed.
4. When the alarm is set to OFF, the alarm symbol will disappear, and the watch will broadcast a 'DI' sound to confirm.

4. Turning Hourly Timekeeping On/Off

1. Site na ọnọdụ ngosipụta oge nkịtị, pịa pịa B2 (MINUTE) bọtịnụ.
2. Each press will toggle the hourly timekeeping function on or off.
3. When activated, a specific symbol will appear on the dial, and the watch will automatically announce the hour.
4. When turned off, the symbol will disappear.

5. Iji Ọrụ Snooze

1. Mgbe mkpu na ada ụda, pịa B4 (TALKING) bọtịnụ.
2. This will stop the current alarm and activate the snooze function.
3. The alarm will sound again automatically after 5 minutes.

6. Broadcasting the Current Time

• Site na ọnọdụ ngosipụta oge nkịtị, pịa pịa B4 (TALKING) bọtịnụ otu ugboro.
• The watch will audibly announce the current time.

Nlekọta

Ngbanwe batrị

The watch uses one LR44 battery. You will know it's time to replace the battery if you observe any of the following:

• The display font becomes blurred or disappears.
• The sound volume becomes significantly lower.
• The watch functions abnormally or inconsistently.

To replace the battery, carefully open the back casing of the watch. Replace the old LR44 battery with a new one, ensuring correct polarity. Close the back casing nke ọma.

Ọgụgụ 3: Azụ view of the watch, showing the battery compartment access.

Nchọpụta nsogbu

If you experience issues with your XINJIA XJ-768 watch, consider the following common solutions:

• Enweghị Ngosipụta ma ọ bụ Ngosipụta Na-adịghị Ike: Check the battery. It may be depleted or improperly installed. Replace with a new LR44 battery if necessary.
• Enweghị ụda ma ọ bụ ụda dị ala: This is often an indication of a low battery. Replace the battery.
• Incorrect Time/Alarm: Ensure you have followed the time and alarm setting instructions precisely. Repeat the setting process if needed.
• Bọtịnụ anaghị anabata: A low battery can affect button responsiveness. Try replacing the battery. If the issue persists, ensure no debris is obstructing the buttons.

Maka nsogbu ndị na-adịgide adịgide nke usoro ndị a na-edozighị, biko gaa na ngalaba Akwụkwọ ikike na Nkwado.

Nkọwapụta

Akwụkwọ ikike na nkwado

For information regarding warranty coverage or technical support for your XINJIA XJ-768 Electronic Voice Watch, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Wuhan Prisco