Okwu mmalite
Thank you for choosing the LEPOTEC 54-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lighting solution. Please read this manual thoroughly before use and retain it for future reference.
Ihe ngwugwu
- 2 x LEPOTEC 54-LED Motion Sensor Cabinet Lights
- 2 x Iron Sheets (for magnetic mounting)
- 1 x eriri USB
- 2 x teepu nrapado
- 1 x Akwụkwọ ntuziaka onye ọrụ
Ngwaahịa gafereview
The LEPOTEC 54-LED Motion Sensor Cabinet Light features 54 lamp beads for bright, soft, and non-glare illumination. Constructed from aluminum alloy, it boasts a slim profile and versatile functionality.
Nwụnye
The light features a built-in magnet for easy attachment and removal. Follow these steps for installation:
- Mgbakwụnye magnetik: The light has a built-in magnet. It can be directly absorbed onto any ironwork surface.
- Nrikwa nrapado: For non-iron surfaces, use the included adhesive tape to attach the iron sheet to your desired location. Once the iron sheet is secured, the light can be magnetically attached to it.
- Mwepụ: When charging or relocating, simply detach the light from the magnetic strip or ironwork.
Ụdị arụ ọrụ
The light features a 3-mode switch (On-Off-G) to adjust its operation:
- N'Ụdị: Ìhè ahụ na-anọgide na-enwu.
- Gbanyụọ ọnọdụ: Agbanyụrụ ọkụ.
- G (Motion Sensor) Mode: In dark environments, the light automatically senses human motion within a 10ft/120° range and turns off after 20 seconds of no movement.
Motion Sensor Conditions
Under G (Motion Sensor) Mode, the sensor is only activated in low-light conditions. It will not turn on if sufficient ambient light is detected.
Ịchaji
The light features a built-in 2500mAh high-capacity rechargeable battery. It is easily charged via the included USB cable.
- Oge nchaji: Ihe dị ka awa 3 maka ụgwọ zuru ezu.
- Ndụ batrị: About 3 hours in ON mode, and 2-4 weeks in G (Motion Sensor) mode (activating 10 times a day).
- Ngosipụta chaja: A red light indicates charging, and a green light indicates a full charge.
Ihe ngosi ojiji
This versatile light can be used in various indoor locations to provide convenient illumination:
Nchọpụta nsogbu
- Light not turning on in G Mode: Ensure the environment is dark enough. The sensor will not activate if sufficient ambient light is detected.
- Interference between lights: Do not place two motion-activated LED night lights too close to each other, as they can interact and cause one or both products to malfunction.
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị | LEPOTEC |
| Nọmba nlereanya | L54-2-warm |
| Agba | Silver-warm White Light |
| Ihe onwunwe | Aluminom |
| Akụkụ ngwaahịa | 12.5"L x 1.6"W x 0.4"H |
| Isi Iyi Ike | Akwadoro batrị (USB enwere ike ịchaji) |
| Ụdị batrị | Lithium polymer (2500mAh) |
| Ụdị isi iyi ọkụ | LED (54 lita)amp beads) |
| Icha ọkụ | 300 Lumen |
| Okpomọkụ agba | 3500 Kelvin (Warm White Light) |
| Njirimara Pụrụ Iche | Sensọ ngagharị |
| Ụdị nwụnye | Surface Mount (Magnetic/Adhesive) |
| Ojiji ime ime/n'èzí | Ime ụlọ |
| Ibu Ibu | 13.3 ounces |
Nkwado ndị ahịa
For any questions, concerns, or technical assistance, please refer to the contact information provided with your purchase or visit the official LEPOTEC websaịtị.