Okwu mmalite
Daalụ maka ịzụrụasing the Outsunny Metal Garden Dining Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor table. Please read these instructions carefully before use and retain them for future reference.
Image: The Outsunny Metal Garden Dining Table, showcasing its tempered glass top and metal frame, designed for outdoor use.
Ozi nchekwa
- Oke ibu kacha: Do not exceed the maximum load of 154 lbs (70 kg) on the tabletop.
- Nkwụsi ike: Ensure the table is placed on a flat, stable surface to prevent tipping.
- Mgbakọ: Follow all assembly instructions carefully. It is recommended that 4 people assist with assembly for safety and ease.
- Eji nche anwụ: When using an umbrella with the table, ensure the umbrella is securely anchored and closed during strong winds to prevent damage or injury.
- Elu iko: The tempered glass top is durable but can break if subjected to severe impact. Handle with care.
- Ụmụaka: Keep children away from the table during assembly and supervise them when near the table during use.
Ihe ngwugwu
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Tebụl iko dị ọkụ
- Metal Frame Components (Legs, Support Bars)
- Hardware Pack (Screws, Washers, Nuts)
- Umbrella Hole Ring and Cap
- Akwụkwọ ntuziaka
Ngwa achọrọ (anaghị etinye ya): Screwdriver
Ntuziaka na Nhazi na Mgbakọ
Please read all steps before beginning assembly. It is recommended to assemble the table on a soft, clean surface to prevent scratches.
- Wepu akụrụngwa: Jiri nlezianya wepụ akụkụ niile dị na ngwugwu ahụ ma tinye ha n'elu ebe echekwara.
- Tinye ụkwụ na Frame: Connect the metal legs to the main frame using the provided screws and hardware. Ensure all connections are finger-tight at this stage.
- Wụnye Ogwe Nkwado: Secure any cross-support bars between the legs or frame as indicated in the diagrams.
- Ebe kacha elu Glass: Carefully place the tempered glass tabletop onto the assembled frame. Ensure it aligns correctly with the frame and any suction cups or securing points.
- Secure Glass Top: If applicable, secure the glass top to the frame using any provided clips or screws.
- Insert Umbrella Hole Components: Place the umbrella hole ring and cap into the designated opening in the glass top.
- Mechie ngwa ngwa niile: Once all components are in place and aligned, fully tighten all screws and fasteners with a screwdriver. Do not overtighten.
- Nyocha ikpeazụ: Gently shake the table to ensure it is stable and all connections are secure.
Image: A diagram illustrating the dimensions of the dining table, including length, width, height, and umbrella hole diameter.
Foto: Zuru ezu view of the table's construction, highlighting round corners, customized sturdy screws, extra support for stability, and unique leg design.
Ntuziaka ọrụ
This dining table is designed for outdoor use in various settings such as patios, gardens, and balconies.
- Nkwanye: Position the table on a level, stable surface.
- Ojiji nche anwụ: Insert a patio umbrella pole through the center hole. The hole accommodates poles with diameters of 1.45 inches (3.7 cm) or 1.7 inches (4.4 cm). Use the provided cap when an umbrella is not in use.
- Nkesa arọ: Distribute weight evenly across the tabletop. Do not place heavy objects on one side only.
Image: The Outsunny dining table set up on a patio with an umbrella and two chairs, demonstrating its intended use.
Image: A graphic illustrating the versatility of the table for use in various outdoor environments like patios, poolside, and gardens, as well as indoor spaces.
Nlekọta
- Nhicha: Wipe the tempered glass top and metal frame with a damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly. Avoid abrasive cleaners or harsh chemicals.
- Nyocha: Na-elele skru na ngwa ngwa niile kwa oge iji hụ na ha kwụgidere. Tinyegharịa ka ọ dị mkpa.
- Nchekwa ihu igwe: While designed for outdoor use, covering the table during extreme weather conditions (heavy rain, snow, strong winds) or prolonged periods of non-use will extend its lifespan.
- Nchekwa: If storing indoors for the off-season, ensure the table is clean and dry.
Foto: nso nso views detailing the 5mm thick water wave tempered glass, the durable metal construction frame, and the built-in umbrella hole with its components.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Tebụl ahụ na-ama jijiji mgbe e mechara mgbakọ ahụ. | Fasteners are not fully tightened or table is on an uneven surface. | Ensure all screws and bolts are securely tightened. Move the table to a level surface. |
| Glass top does not sit flush. | Frame components are not assembled correctly or glass is misaligned. | Disassemble and re-assemble the frame, ensuring all parts are correctly oriented. Carefully re-position the glass top. |
| Umbrella does not fit in the hole. | Umbrella pole diameter is too large or too small for the provided inserts. | Verify your umbrella pole diameter. The table accommodates 1.45" (3.7 cm) or 1.7" (4.4 cm) poles. |
Nkọwapụta
- Ụdị: 84B-376V01
- N'ozuzu akụkụ: 47.25" L x 31.5" W x 27.5" H (120 cm L x 80 cm W x 70 cm H)
- Ihe: Igwe igwe, elu Glass nwere iwe
- Agba: Carbon isi awọ
- Ibu ihe: 13.97 n'arọ (30.8 lbs)
- Oke ibu kacha: 154 lbs (70 n'arọ)
- Umbrella Hole Diameter: 1.45" (3.7 cm) / 1.7" (4.4 cm) or 44 mm
- Mgbakọ achọrọ: Ee
- Recommended Assembly Persons: 4
- Ntuziaka nlekọta: Hichapụ Ọcha
Akwụkwọ ikike na nkwado
Ngwaahịa Outsunny a na-abịa na a 90-day warranty against manufacturer defects. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.
For customer support, missing parts, or warranty inquiries, please contact Aosom Canada:
- Onye nrụpụta: Aosom Canada
- Ebe: Markham, Ontario, CA
- Ekwentị: 1-416-792-6088