Jasco Philips Broadcast TV Antenna SDV2227N/27 User Manual

Okwu mmalite

This manual provides instructions for the proper setup, operation, and maintenance of your Jasco Philips Broadcast TV Antenna, model SDV2227N/27. This antenna is designed to receive free local digital and HD broadcast television signals. It supports 1080p HD and 4K Ultra HD reception, with an effective range of up to 40 miles from the broadcast source. This passive antenna is compatible with all television brands. Please read this manual thoroughly before using the product.

Image of the Jasco Philips Broadcast TV Antenna SDV2227N/27, showing its compact design suitable for indoor use.

Melite

Unpack the Antenna: Carefully remove all components from the packaging. Ensure all parts are present.
Jikọọ na TV: Connect the coaxial cable from the antenna to the "Antenna In" or "Cable In" port on the back of your television.
Debe Antenna: For optimal reception, place the antenna in a location with minimal obstructions, preferably near a window and facing the direction of local broadcast towers. You may need to experiment with different positions to find the best signal.
Run a Channel Scan:
- Gbanwuo igwe onyonyo gị.
- Access your TV's setup menu (usually labeled "Menu," "Settings," or "Setup").
- Navigate to the "Channel Scan," "Auto Program," or "Auto Tune" option.
- Select "Antenna" or "Air" as the input source, then initiate the scan. This process may take several minutes.
Adjust for Best Signal: After the scan, check the picture quality of the received channels. If reception is poor on certain channels, try repositioning the antenna and running another channel scan.

Na-arụ ọrụ

Once the antenna is set up and a channel scan is complete, operating the antenna is straightforward.

Nhọrọ ọwa: Use your television's remote control to change channels as you normally would.
Ike mgbaama: Some televisions have a signal strength meter in their settings menu. This can be useful for fine-tuning antenna placement.
Ịchọgharị ọwa: It is recommended to rescan for channels periodically (e.g., monthly) or if you notice a loss of channels, as broadcast towers may change frequencies or new channels may become available.

Nlekọta

The Jasco Philips Broadcast TV Antenna requires minimal maintenance.

Nhicha: Dust the antenna periodically with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Nyocha USB: Periodically check the coaxial cable for any signs of damage or wear. Ensure connections are secure.
Eji ime ụlọ naanị: This antenna is designed for indoor use. Do not expose it to outdoor elements, extreme temperatures, or moisture.

Nchọpụta nsogbu

Nsogbu	Ihe nwere ike ime	Ngwọta
No channels found or poor reception.	Antenna not properly connected. Antenna poorly positioned. Channel scan not performed or incomplete. Obstructions blocking signal. Broadcast tower distance.	Ensure coaxial cable is securely connected to the TV. Reposition the antenna, try near a window or higher location. Mee nyocha ọwa ọhụrụ na TV gị. Move antenna away from large metal objects or electronics. Lelee FCC DTV Reception Map for local broadcast tower locations and signal strength.
Picture freezes or pixelates.	Mgbama na -adịghị ike. Ntinye aka.	Adjust antenna position for stronger signal. Rescan channels. Ensure antenna is not near other electronic devices that may cause interference.
Some channels are missing.	Incomplete channel scan. Antenna not optimized for all local channels.	Perform a full channel scan. Try different antenna orientations and rescan each time. Some channels may be too far or blocked by terrain/buildings.

Nkọwapụta

Ụdị: SDV2227N/27
Akara: Jasco
Ụdị antenna: Passive, Indoor
nnabata: Digital, HD, 4K Ultra HD
Oke: Up to 40 miles (from broadcast source)
ndakọrịta: All television brands
Ibu ihe: 13.8 ounces
UPC: 030878409988
ASIN: B08CT2MYY2

Akwụkwọ ikike na nkwado

For warranty information or technical support, please refer to the contact information provided with your product packaging or visit the official Jasco websaịtị. Debe akwụkwọ nnata ịzụrụ maka akwụkwọ ikike.

Ụlọ ọrụ Jasco Products LLC
www.byjasco.com

	Akwụkwọ ikike ikike nke Jasco Products Company - ụbọchị 90 Akwụkwọ a na-akọwapụta akwụkwọ ikike nwere oke ụbọchị 90 maka ụlọ ọrụ Jasco Products LLC. Ọ na-akọwapụta usoro na ọnọdụ maka akwụkwọ ikike, mwepu, oke na ikike ndị ahịa.
	Jasco Products Company Limited akwụkwọ ikike - afọ 2 Akwụkwọ a na-akọwapụta akwụkwọ ikike nwere oke afọ 2 nke Jasco Products Company LLC nyere maka ngwaahịa ha. Ọ na-akọwapụta usoro, ọnọdụ, oke na usoro maka ịnyefe arịrịọ akwụkwọ ikike, na-ekwusi ike na akwụkwọ ikike ahụ na-ekpuchi ntụpọ nrụpụta na enweghị ike ibufe ya.
	Mgbanyụọ Ngbanwe Smart nke Jasco 46563 Z-Wave n'ime Mgbidi: QuickFit na SimpleWire Explore the Jasco 46563 Z-Wave In-Wall Smart Toggle Switch, designed for seamless smart home integration. Featuring QuickFit and SimpleWire technologies for simplified installation, this switch enables up to 6-way control and works with popular voice assistants like Amazon Alexa and Google Assistant. Expand your home automation capabilities with this versatile device.
	Jasco Pro Series Smart Water Leak Sensor (81018) - Installation & Setup Guide Comprehensive guide for installing and setting up the Jasco Pro Series Smart Water Leak Sensor (Model 81018, ZWN6310). Learn how to connect to Z-Wave networks, troubleshoot, and utilize its features for home automation and water leak detection.
	JASCO Z-Wave Smart Iju mmiri/Freeze Sensor ZW6309 Akwụkwọ ntuziaka onye ọrụ Akwụkwọ ntuziaka onye ọrụ maka JASCO Z-Wave Smart Iju mmiri/Ihe mmetụta oyi (ZW6309 Model). Mụta maka nrụnye, njikọta, atụmatụ, nhọrọ ike, nchekwa, na nkọwapụta.
	Ntuziaka ntinye nke JASCO Z-Wave On/Gbanyụọ Relay Switch na 3-Way Kit Installation guide and user manual for the JASCO Z-Wave Certified Wireless Lighting Control On/Off Relay Switch and 3-Way Switch Kit (models 45609, 45610, ZW4001). Learn about setup, wiring, features, safety, and specifications for smart home lighting automation.

Jasco SDV2227N/27