Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

1. Okwu mmalite

Daalụ maka ịzụrụasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Ozi nchekwa

• Debe ngwaahịa a mgbe niile. Ejila mmiri ozuzo ma ọ bụ damp ọnọdụ.
• Do not disassemble. If repairs become necessary, this product must be sent to an authorized maintenance center.
• Debe ebe ụmụaka na-apụghị iru.
• Do not use the flash unit in the presence of flammable gases, chemicals, or other materials.
• Do not touch the flash head immediately after use, as it may be hot.
• Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Ngwaahịa gafereview

3.1 Atụmatụ

• Full TTL Functionality: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
• Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
• Ọrụ ndị siri ike: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
• Wireless Grouping System: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
• Nchekwa oke ọkụ: Designed with protection against overheating for extended use.
• Ịrụ ọrụ nke ọma: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
• Ọrụ mbugharị: Automatic and manual zoom from 24mm to 105mm.
• Personal Function Settings (C.Fn): Customizable settings for personalized operation.
• Ndakọrịta sara mbara: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

Ihe ngwugwu 3.2

• 1 x Godox TT350N Flash Unit
• 1 x Obere Nkwụdo
• 1 x Okwu nchekwa
• 1 x Color Filter
• 1 x Akwụkwọ ntuziaka onye ọrụ
• 1 x VFOTO Lens Cleaning Cloth

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Akụkụ Aha na Ọrụ

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

1. Zoom Selection Button
2. Bọtịnụ nhọrọ ọnọdụ
3. Custom Function Setting Button (reusable button, long press for 2 seconds)
4. Bọtịnụ nnwale/Ihe ngosi njikere Flash
5. Ogwe LCD
6. Bọtịnụ mmekọrịta dị elu
7. S1/S2 Optic Slave Triggering Selection Button (in non-wireless mode)
8. Group/Channel Button (reusable button, in wireless mode)
9. Mgbanwe ọkụ
10. Mkpọchi mgbanaka
11. Bọtịnụ nhọrọ ikuku ikuku (bọtịnụ enwere ike iji ya, ogologo pịa maka sekọnd 2)
12. Igwe ọkụ
13. Ntọala Ntọala
14. Họrọ Ịkpọ oku
15. Ụlọ batrị
16. Ihe mmetụta njikwa anya
17. Ntụkwasị Obi Enyemaka Beam
18. Isi Flash
19. Ogwe ọkụ ọkụ
20. Wuru Ogwe arụnyere

4. Nhazi

4.1 Ntinye batrị

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

1. Mepee mkpuchi nke batrị dị n'akụkụ nke ngwa ọkụ ahụ.
2. Insert two AA batteries according to the polarity indicators (+/-) inside the compartment.
3. Mechie mkpuchi nke batrị batrị nke ọma.

4.2 Mounting to Camera

To mount the flash unit onto your camera's hotshoe:

1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Gbanyụọ ma ọ bụ gbanyụọ

• To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
• To power off, slide the Power Switch to the 'OFF' position.

5. Ụdị arụ ọrụ

The TT350N offers various flash modes to suit different shooting scenarios. Press the MODE button to cycle through the available modes.

5.1 TTL Autoflash Mode

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

• Pịa MODE button until 'TTL' is displayed on the LCD panel.
• The flash will automatically adjust its output based on the camera's metering.

5.2 Manual Flash Mode (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• Pịa MODE button until 'M' is displayed.
• Tụgharịa Họrọ Ịkpọ oku to adjust the flash output power.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

• Pịa MODE button until 'Multi' is displayed.
• Jiri ihe Họrọ Ịkpọ oku na SET button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 Mmekọrịta Ọsọ dị elu (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

• Pịa SYNC button to activate HSS. The HSS icon will appear on the LCD.

5.5 First/Second Curtain Sync

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

• These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Ụgwọ Mkpughe Flash (FEC)

FEC allows you to fine-tune the flash output in TTL mode, making the flash brighter or darker by up to ±3 stops in 1/3 stop increments.

• In TTL mode, press the SET button. The FEC value will blink.
• Tụgharịa Họrọ Ịkpọ oku to adjust the FEC value.
• Pịa SET bọtịnụ ọzọ iji gosi.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview the lighting effect before taking the actual shot.

• Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

• Master Unit: The TT350N can control other Godox slave units such as AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, and TT600.
• Slave Unit: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
• To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
• Jiri ihe GR/CH bọtịnụ na Họrọ Ịkpọ oku to set the group (A, B, C) and channel (1-16).
• Ensure all units are set to the same channel and group for proper communication.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

• Ụdị S1: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
• Ụdị S2: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
• To activate S1 or S2 mode, press the B button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

• Pịa ogologo C.Fn button for 2 seconds to enter the custom function settings menu.
• Jiri ihe Họrọ Ịkpọ oku to navigate through the available functions.
• Pịa SET button to select a function and then use the Họrọ Ịkpọ oku ịgbanwe uru ya.
• Pịa SET button again to confirm the change.
• Pịa ogologo C.Fn button again to exit the custom function settings.

8. Nlekọta

• Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
• Remove batteries when the flash is not in use for an extended period to prevent leakage.
• Store the flash in a cool, dry place, away from direct sunlight and extreme temperatures.
• Zere mmetụta siri ike ma ọ bụ ịdaba na nkeji ahụ.

9. Nchọpụta nsogbu

• Flash anaghị agba ọkụ: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
• Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
• Wireless triggering issues: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
• Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Nkọwapụta

11. Akwụkwọ ikike na nkwado

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox websaịtị. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.