Okwu mmalite
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Samson Expedition Escape Plus Rechargeable Bluetooth Speaker System. Please read this manual thoroughly to ensure optimal performance and longevity of your device.
Foto: N'ihu view of the Samson Expedition Escape Plus speaker, showcasing its protective grille and Samson logo.
Ihe ngwugwu
Nyochaa na etinyere ihe niile edepụtara n'okpuru na ngwugwu gị:
- Samson Expedition Escape Plus Speaker Unit
- Igwe ọkụ ọkụ
- Akwụkwọ Ndị Ọrụ (akwụkwọ ntuziaka a)
Njirimara ngwaahịa
The Samson Expedition Escape Plus offers a range of features designed for versatile audio applications:
- All-In-One Portable Speaker System
- Lightweight design, weighing approximately 7.55 lbs (3.42 kg)
- Internal rechargeable battery providing up to 20 hours of continuous use
- Klas D amplifier delivering 50 Watts of power
- Njikọ Bluetooth maka nkwanye ụda ikuku ikuku
- 2-channel mixer with master volume control
- 1/4 inch microphone input with independent volume control
- 1/8 inch (3.5mm) auxiliary input for line-level devices
- 2-way speaker enclosure featuring a 6-inch woofer and a 1-inch tweeter
- USB wireless port for use with Samson XPD Series USB Digital Wireless Systems (sold separately)
- Rugged polypropylene enclosure with an integrated carry handle
- Tilt-back design for sideways positioning
- 1-3/8 inch speaker stand mount for elevated placement
Melite
- Nchaji mbụ: Before first use, fully charge the speaker. Connect the included power cable to the AC input on the rear panel and plug it into a standard AC outlet. The charge indicator light will illuminate.
- Nkwanye: Position the speaker on a stable, flat surface. For optimal sound projection, consider using the integrated 1-3/8 inch speaker stand mount to elevate the speaker. The tilt-back design allows for angled placement when used on the floor.
- Ike Na: Locate the POWER switch on the rear panel. Flip the switch to the 'ON' position. The power indicator light will illuminate.
Image: Rear panel of the speaker, displaying the power switch, AC input, volume controls, Bluetooth pairing button, microphone input, auxiliary input, and USB wireless port.
Image: The speaker shown mounted on a standard speaker stand, demonstrating its compatibility with elevated setups.
Ntuziaka ọrụ
Njikọ Bluetooth
- Gbaa mbọ hụ na agbanyere ọkà okwu.
- Pịa ma jide Mmakọ button on the rear panel until the Bluetooth indicator light begins to flash, indicating it is in pairing mode.
- On your Bluetooth-enabled device (smartphone, tablet, etc.), navigate to the Bluetooth settings and select "Samson Escape+" from the list of available devices.
- Once connected, the Bluetooth indicator light on the speaker will glow solid. You can now stream audio wirelessly.
Using Microphone Input
- Connect a wired microphone to the 1/4" MIC INPUT n'azụ panel.
- Hazie nke MIC OLLỌ knob to control the microphone's level independently.
Using Auxiliary Input
- Connect an audio player or other line-level device to the 1/8" AUX INPUT using a 3.5mm audio cable.
- Hazie nke UMUAKA VOLUME knob to control the overall output level, including the auxiliary input.
Using USB Wireless Port
The USB wireless port is designed for use with Samson XPD Series USB Digital Wireless Systems (sold separately). Insert the XPD Series USB receiver into this port to integrate a wireless microphone or instrument system.
Ịchaji batrị
When the battery level is low, the charge indicator light may change color or flash. Connect the speaker to an AC power source using the provided power cable to recharge the internal battery. The speaker can be used while charging.
Nlekọta
- Nhicha: Use a soft, dry cloth to clean the exterior of the speaker. Avoid using abrasive cleaners or solvents.
- Nchekwa: Chekwaa ọkà okwu n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
- Nlekọta batrị: For optimal battery life, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to approximately 50% every few months.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Enweghị ike | Battery is depleted; Power cable not connected; Power switch is off. | Charge the battery; Ensure power cable is securely connected; Turn the power switch to 'ON'. |
| Enweghị mmepụta ụda | Volume is too low; Input source not connected or muted; Incorrect input selected. | Increase MASTER VOLUME and MIC VOLUME (if applicable); Verify input source connection and volume; Ensure correct input is active. |
| Bluetooth anaghị ejikọ | Speaker not in pairing mode; Device too far from speaker; Incorrect device selected. | Press and hold PAIR button until light flashes; Move device closer to speaker (within 10 meters); Select "Samson Escape+" from device's Bluetooth list. |
Nkọwapụta
| Njirimara | Nkọwapụta |
|---|---|
| Aha Nlereanya | SAXPESCP |
| Ụdị Ọkà Okwu | Woofer |
| Njirimara Pụrụ Iche | Enwere ike ibugharị |
| Eji akwadoro | For Smartphones or Tablets, Intimate gatherings, backyard BBQ, events |
| Ngwa dakọtara | Ekwentị mkpanaaka |
| Nhazi ọwa ụda gburugburu | 2.0 |
| Agba | Nwa |
| Akụkụ ngwaahịa | 11.7"D x 11.7"W x 17"H (29.7cm x 29.7cm x 43.2cm) |
| Ibu Ibu | Pound 7.55 (3.42 n'arọ) |
| Mgbochi | 1E+5 Ohm |
| Enweghị mmiri | FALSE (Not Water Resistant) |
| Ọnụọgụ nke ihe | 1 |
| Usoro njikwa | Touch (Buttons/Knobs) |
| Teknụzụ nzikọrịta ozi ikuku | Bluetooth |
| Nha Ọkà Okwu | 6 sentimita asatọ (Woofer) |
| Isi Iyi Ike | Igwe ọkụ eletrik, na-akwado batrị |
| Dayameta Tweeter | 1 sentimita asatọ |
| Ọnụọgụ nke batrị | 1 Lithium ion batrị achọrọ |
| Ụdị ọkwọ ụgbọ ala ọdịyo | Ọkwọ ụgbọala dị ike |
| Oke Bluetooth | 10 Mita (33 ụkwụ) |
| Ike Nwepu kacha elu | 50 Watt |
| Teknụzụ Njikọta | Ihe enyemaka, Bluetooth |
| Ọnọdụ mmepụta ọdịyo | Stereo |
| Ụdị nkwụnye | Nkwụnye Mount, Freestanding |
Image: The speaker with its dimensions clearly marked: 11.7 inches deep, 11.7 inches wide, and 17 inches high.
Akwụkwọ ikike na nkwado
The Samson Expedition Escape Plus is covered by a Limited Warranty. For specific details regarding warranty coverage, please refer to the documentation included with your product or visit the official Samson website. For technical support or service inquiries, please contact Samson customer service through their official channels.