VicTsing Wood Grain Essential Oil Diffuser User Manual

1. Okwu mmalite

Thank you for choosing the VicTsing Wood Grain Essential Oil Diffuser. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new aromatherapy diffuser. Please read this manual thoroughly before using the product and retain it for future reference.

2. Ntuziaka nchekwa

To ensure safe operation and prevent damage to the product or injury to yourself, please observe the following safety precautions:

• Always place the diffuser on a stable, flat, and water-resistant surface.
• Do not place the diffuser near heat sources, direct sunlight, or on electronic devices.
• Use only clean tap water or distilled water. Do not use purified water or mineral water.
• Do not exceed the maximum water level indicated inside the water tank.
• Only use 100% pure, natural essential oils. Avoid corrosive or chemical-based oils.
• Debe ebe ụmụaka na anụ ụlọ na-apụghị iru.
• Unplug the diffuser from the power outlet before cleaning or when not in use for extended periods.
• Do not touch the ultrasonic vibrating plate directly with your fingers or sharp objects.
• If the diffuser emits an unusual smell or sound, or if smoke appears, unplug it immediately.
• Akwụsịla oghere alụlụ.

3. Ihe ngwugwu

Biko lelee ọdịnaya nke ngwugwu mgbe ị na-ebupụ igbe:

• 1 x VicTsing Wood Grain Essential Oil Diffuser
• 1 x AC nkwụnye
• 1 x Nyocha iko
• 1 x Akwụkwọ ntuziaka onye ọrụ

4. Ngwaahịa gafereview

Familiarize yourself with the components of your diffuser:

Image 1: Components of the VicTsing Wood Grain Essential Oil Diffuser. This diagram illustrates the top cover, water tank, mist outlet, light button, mist button, and power input.

• Ihe mkpuchi kachasị: Removable cover for accessing the water tank.
• tank mmiri: Reservoir for water and essential oils.
• Ebe alụlụ: Where the aromatherapy mist is released.
• Bọtịnụ ọkụ: Controls the LED light functions.
• Bọtịnụ alụlụ: Controls the mist output and timer settings.
• Ọpụpụ ikuku: Ensures proper airflow.
• Ntinye ike: Jikọọ na ihe nkwụnye AC.
• Ultrasonic Plate: Located at the bottom of the water tank, responsible for mist generation.

5. Nhazi

Soro usoro ndị a maka nhazi mbụ:

1. Debe ihe mgbasa ozi n'elu larịị ma kwụsie ike.
2. Wepụ mkpuchi elu site n'ibuli ya elu.
3. Connect the AC adapter to the power input port at the bottom of the diffuser. Then, plug the adapter into a wall outlet.
4. Using the measuring cup, fill the water tank with clean tap water or distilled water up to the maximum water level line (150ml). Do not overfill.
5. Add 3-5 drops of 100% pure essential oil directly into the water tank. Adjust the amount based on personal preference and room size.
6. Dochie mkpuchi elu ahụ, hụ na ọ nọdụrụ nke ọma.

Image 2: Setup process for the VicTsing Wood Grain Essential Oil Diffuser. This image shows the steps of removing the cover, adding water and essential oil, and replacing the cover.

6. Ntuziaka ọrụ

Once set up, operate your diffuser using the two buttons:

Mist Button (Left Button)

• Pịa 1st: Continuous mist mode. The diffuser will operate until the water runs out.
• Pịa nke abụọ: 1-hour timer mode. The diffuser will operate for 1 hour and then automatically shut off.
• Pịa nke atọ: 3-hour timer mode. The diffuser will operate for 3 hours and then automatically shut off.
• Pịa 4: 6-hour timer mode. The diffuser will operate for 6 hours and then automatically shut off.
• Pịa 5: Turn off the mist function.
• The diffuser features an automatic shut-off function when water runs out, regardless of the timer setting.

Light Button (Right Button)

• Pịa 1st: Turn on the LED light, which will cycle through 8 colors automatically.
• Pịa nke abụọ: Fix the light to its current color.
• Mbipụta Ndị Na-esote: Cycle through the 8 available colors to select your desired fixed color.
• Pịa ogologo (nkeji 2): Turn off the light function.

7. Nlekọta

Regular cleaning helps ensure optimal performance and extends the lifespan of your diffuser. Clean the diffuser after every 5-6 uses or every 3-5 days.

1. Kpupu ihe mgbasa ozi na oghere ọkụ.
2. Remove the top cover and drain any remaining water from the water tank. Ensure to drain from the side opposite the air outlet to prevent water from entering internal components.
3. Add a small amount of warm water (not hot) and 1-2 drops of neutral detergent to the water tank.
4. Gently wipe the inside of the water tank and the ultrasonic plate with a soft cloth or cotton swab. Do not scrub aggressively.
5. Rinse the water tank with clean water, again avoiding the air outlet side.
6. Jiri ákwà dị nro ma kpọọ nkụ hichaa mpụta nke ihe mgbasa ozi ahụ.
7. Kwe ka akụkụ niile kpochaa kpamkpam tupu achịkọta ma ọ bụ chekwaa.

Ihe dị mkpa: Do not use corrosive cleaners, alcohol, or harsh chemicals. Do not immerse the diffuser base in water.

8. Nchọpụta nsogbu

Ọ bụrụ na ị na-enwe nsogbu na diffuser gị, biko lelee nsogbu na ngwọta ndị a na-ahụkarị:

9. Nkọwapụta

10. Akwụkwọ ikike na nkwado

VicTsing products are designed and manufactured to the highest quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official VicTsing website. Please have your product model name and purchase date available when contacting support.