FEITIAN bR500-C45F USB Smart Card Reader - User Manual

1. Okwu mmalite

The FEITIAN bR500-C45F is a versatile and portable smart card reader designed for secure ID authentication, e-payment, and access control. It supports both USB and Bluetooth connectivity, making it compatible with a wide range of devices including mobile phones, tablets, and computers. This manual provides essential information for setting up, operating, and maintaining your bR500-C45F reader.

2. Akụrụngwa Ngwaahịa

• Nkwụnye ma kpọọ: Easy setup with most operating systems.
• Readily Compliant: Meets industry standards for smart card reading.
• Suits Any Application: Ideal for secure ID authentication, e-payment, and access control.
• Ntụkwasị obi dị elu: Meantime Between Failure (MTBF) of 500,000 hours.
• Ogologo ndụ batrị: Equipped with a 350mAh Li Battery, providing over a week of normal usage.

3. Ihe ngwugwu

Biko chọpụta na ihe niile dị na ngwugwu gị:

• FEITIAN bR500-C45F Smart Card Reader
• USB Nchaji/Data USB

Figure 3.1: FEITIAN bR500-C45F Smart Card Reader and USB cable as packaged.

4. Nhazi

4.1 Nchaji izizi

Before first use, it is recommended to fully charge the bR500-C45F. Connect the provided USB cable to the reader's port and the other end to a USB power source (e.g., computer USB port, USB wall adapter).

Figure 4.1: Connecting the bR500-C45F to a USB power source.

4.2 Connecting via USB

For direct connection to a computer, simply plug the USB cable into the reader and then into an available USB port on your computer. The device is designed to be Plug and Play, and necessary drivers should install automatically.

4.3 Jikọọ site na Bluetooth

1. Ensure the bR500-C45F is charged.
2. Turn on the reader (if applicable, refer to device indicators for power status).
3. Kwado Bluetooth na ekwentị mkpanaaka ma ọ bụ kọmputa gị.
4. Chọọ maka available Bluetooth devices. The reader should appear as 'FEITIAN bR500-C45F' or similar.
5. Select the reader to pair. Follow any on-screen prompts for pairing codes if required (typically 0000 or 1234).

5. Ntuziaka ọrụ

5.1 Reading Contactless Smart Cards

The bR500-C45F is designed for contactless smart card operations. To read a card, hold the smart card directly over the designated contactless symbol on the reader's surface. Ensure the card is flat against the reader for optimal communication.

Foto 5.1: N'ihu view of the bR500-C45F, showing the contactless reading area.

5.2 Ngwa ndakọrịta

This reader is compatible with various applications requiring secure ID authentication, e-payment, and access control. Ensure that the software you are using supports standard smart card reader protocols (e.g., PC/SC). For mobile use, specific applications may be required to interface with the reader via Bluetooth.

6. Nlekọta

6.1 Nhicha

To clean the device, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface and internal components.

6.2 Nlekọta batrị

To prolong battery life, avoid exposing the device to extreme temperatures. If storing the device for an extended period, ensure it has a partial charge (around 50%) and recharge it periodically.

7. Nchọpụta nsogbu

• Ngwaọrụ anaghị ejikọta:
  • Gbaa mbọ hụ na ebubo ngwaọrụ ahụ.
  • Maka USB, nwaa ọdụ ụgbọ USB ma ọ bụ eriri dị iche.
  • For Bluetooth, ensure Bluetooth is enabled on your host device and the reader is in pairing mode. Try unpairing and re-pairing.
• Card Not Reading:
  • Ensure the card is placed correctly over the contactless symbol.
  • Verify the card type is supported by the reader and your application.
  • Ensure the reader's firmware is up to date (check manufacturer's websaịtị).
• Okwu ngwanrọ:
  • Ensure your application software is compatible with the bR500-C45F.
  • Check for updated drivers or software from the manufacturer.

8. Nkọwapụta

Ọgụgụ 8.1: Azụ view of the bR500-C45F with regulatory markings.

Figure 8.2: Product box rear, listing key specifications and manufacturer contact.

9. Akwụkwọ ikike na nkwado

For warranty information, technical support, and the latest drivers or firmware updates, please visit the official FEITIAN websaịtị:

http://ftsafe.com/

Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.