1. Okwu mmalite
The Tangent Tuner II is a sophisticated digital audio tuner designed to seamlessly integrate with your existing Hi-Fi system. Combining elegant Danish design with practical functionality, it provides access to a vast array of radio stations through both DAB (Digital Audio Broadcasting) and traditional FM frequencies. Its compact form factor ensures it fits neatly into any audio setup, while the included remote control offers convenient system-wide operation. Equipped with an optical digital output, the Tuner II is ready for connection to modern digital-to-analog converters (DACs) or digital amplifiers, ensuring high-quality audio reproduction.
2. Atụmatụ igodo
- DAB na FM Redio: Access a wide selection of digital and analog radio stations.
- Nha kọmpat: Designed to fit into smaller spaces, complementing other Hi-Fi components.
- Sistemụ njikwa anya: Comprehensive remote control for the tuner and compatible Tangent Hi-Fi components.
- Six Presets: Easily save and recall your favorite radio stations.
- Mpụta Digital Optical: For high-fidelity connection to external DACs or digital ampndị na -enye ndụ.
3. Ntuziaka Nhazi
3.1 Nwepu
Carefully remove the Tangent Tuner II and all accessories from its packaging. Retain the packaging for future transport or storage.
3.2 Ogwe azụ gafereview
Ọgụgụ 3.1: Njikọ azụ azụ
The rear panel of the Tuner II features all necessary connection points for integration into your audio system.
3.3 Njikọ
- Njikọ antenna: Connect a suitable DAB/FM antenna to the coaxial antenna input on the rear panel. A good quality antenna is crucial for optimal reception.
- Audio Output (Analog): Use RCA cables to connect the 'LINE OUT' (L/R) ports on the Tuner II to an available analog input (e.g., 'AUX', 'TUNER') on your amplifier ma ọ bụ nnata.
- Audio Output (Digital): For digital audio transmission, connect an optical cable from the 'OPTICAL OUT' port on the Tuner II to a digital optical input on your DAC or digital ampna -emegharị ihe.
- Njikọ ike: Gbaa mbọ hụ na voltage selector switch (100-120V or 220-240V) is set correctly for your region's power supply. Connect the power cable to the AC input on the rear panel and then to a wall outlet.
- USB (UPGRADES): This USB port is intended for future firmware upgrades only. Do not connect other devices to this port.
3.4 Ike mbido
After making all connections, locate the main power switch on the rear panel and set it to the 'ON' position. The unit will power on and the front display will illuminate.
Figure 3.2: Tuner II integrated into a Hi-Fi system
4. Ntuziaka ọrụ
4.1 Njikwa ihu ihu
Ọgụgụ 4.1: Njikwa ihu ihu
- bọtịnụ ike (⏻): Press to toggle the unit between standby and operational mode.
- DAB-FM Button: Switches between DAB and FM radio modes.
- Bọtịnụ ozi: Cycles through various information displays (e.g., station name, program type, signal strength).
- Bọtịnụ MENU: Accesses the system menu for settings and options.
- Bọtịnụ SCAN: Initiates an automatic scan for available radio stations in the current mode (DAB or FM).
- Bọtịnụ azụ: Na-alaghachi na menu ma ọ bụ ngosi gara aga.
- NAVIGATE / SELECTOR Knob: Rotate to navigate through menus or station lists. Press the knob to confirm a selection (ENTER).
4.2 Ọrụ njikwa anya
Ọgụgụ 4.2: Njikwa anya
The remote control provides full functionality for the Tuner II and can also control other compatible Tangent Hi-Fi components, such as amplifiers na CD Player.
- Ike (⏻): Gbanyụọ ma ọ bụ gbanyụọ unit ahụ.
- VOL+/VOL-: Adjusts the volume of a connected Tangent amplifier (does not control tuner volume directly).
- Navigation Arrows (◄ ► ▲ ▼) & ENTER: Gaa na menu wee chọpụta nhọrọ ndị ị họọrọ.
- DAB / FM: Directly select DAB or FM radio mode.
- INFO / MENU: Access information display or system menu.
- Nyochaa: Initiates station scan.
- Azụ: Na-alaghachi na ihuenyo gara aga.
- Igodo ọnụọgụ (1-6): Directly select saved presets.
- Source Selection Buttons (CD, OPT, TUNE, LINE IN, AUX, BT): These buttons are for controlling compatible Tangent amplifiers or other source components. The 'BT' button is for Bluetooth input selection on a compatible amplifier, not for the Tuner II itself.
4.3 Tuning and Presets
DAB Tuning: In DAB mode, press SCAN to perform a full scan of available digital stations. Use the NAVIGATE knob or remote arrows to browse the station list. Press ENTER to select a station.
Nhazi FM: In FM mode, press SCAN to auto-tune to the next strong station. Alternatively, use the NAVIGATE knob to manually tune frequencies. Press ENTER to confirm.
Ịchekwa atọrọ atọ: Once a station is tuned, press and hold one of the number buttons (1-6) on the remote control until the display confirms the preset has been saved. To recall a preset, simply press the corresponding number button.
5. Nlekọta
To ensure the longevity and optimal performance of your Tangent Tuner II, follow these maintenance guidelines:
- Nhicha: Use a soft, dry cloth to clean the exterior surfaces of the unit. Do not use liquid cleaners, abrasive cloths, or chemical solvents, as these may damage the finish.
- Igwe ikuku: Ensure the unit has adequate ventilation. Do not block any ventilation openings. Avoid placing the unit in enclosed spaces or on soft surfaces that may impede airflow.
- Nkwanye: Place the unit on a stable, level surface away from direct sunlight, heat sources, excessive dust, moisture, or vibrations.
- Ike: Kwụpụ eriri ọkụ eletrik ahụ na ebe a na-esi na mgbidi ma ọ bụrụ na a gaghị eji ngwaọrụ ahụ ruo ogologo oge.
6. Nchọpụta nsogbu
If you experience issues with your Tangent Tuner II, consult the following troubleshooting guide:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Enweghị ike | Power cable disconnected; Rear power switch off; Incorrect voltagntọala nhọrọ e. | Ensure power cable is securely connected. Turn the rear power switch to 'ON'. Verify the voltage selector is set correctly for your region. |
| No signal or poor reception (DAB/FM) | Antenna not connected or faulty; Weak signal area; Interference. | Check antenna connection. Try repositioning the antenna or using a higher-gain antenna. Perform a new station scan. Move unit away from other electronic devices. |
| Enweghị mmepụta ụda | Audio cables disconnected; Incorrect input selected on amponye na-agba ume; Ampolu lifia dị oke ala. | Verify RCA or optical cables are securely connected to both the Tuner II and your amplifier. Select the correct input source on your amplifier. Increase ampolu olu. |
| Njikwa anya anaghị arụ ọrụ | Batteries depleted; Obstruction between remote and unit; Remote not pointed correctly. | Replace remote control batteries. Ensure there is a clear line of sight between the remote and the Tuner II's front panel sensor. Point the remote directly at the unit. |
| Cannot save more than 6 presets | Unit design limitation. | The Tangent Tuner II is designed with a maximum of six programmable presets. This is not a fault. |
7. Nkọwapụta
| Njirimara | Nkọwapụta |
|---|---|
| Ụdị | Tangent |
| Nọmba nlereanya | TUNER II |
| Agba | Nwa |
| Ụdị Tuner | DAB / DAB+ / FM |
| Ntinye ederede | 1 x Stereo RCA (Line Out), 1 x Optical Digital Out |
| Njikọ ndị ọzọ | USB (for upgrades only) |
| Atụmatụ pụrụ iche | Remote Control, 6 Presets |
| Ịnye ọkụ | AC 110-240V, 50/60Hz |
| Oriri ike | 0.5W (Standby) |
| Akụkụ (W x D x H) | 195 mm x 194 mm x 70 mm |
8. Akwụkwọ ikike na nkwado
For detailed warranty information, please refer to the warranty card included with your product or visit the official Tangent webEbe nrụọrụ weebụ. Usoro nkwa nwere ike ịdị iche site na mpaghara na ụlọ ahịa.
For technical support, product registration, or to find authorized service centers, please visit the official Tangent websaịtị ma ọ bụ kpọtụrụ onye na-ere ahịa mpaghara gị. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ maka nkwupụta ikike.
Official Tangent Websaịtị: www.tangent-audio.com