DAKASON 30W LED Wall Pack Instruction Manual

Okwu mmalite

Thank you for choosing the DAKASON 30W LED Wall Pack. This product is designed to provide efficient and reliable outdoor lighting with features such as a dusk-to-dawn photocell and an adjustable head. This manual provides essential information for safe installation, operation, and maintenance of your LED wall pack. Please read it thoroughly before installation and keep it for future reference.

Image: DAKASON 30W LED Wall Pack with adjustable head installed on a building exterior, illuminating the area below.

Ozi nchekwa

Biko debe ihe ndị a n'oge nrụnye na ọrụ:

• Ịdọ aka ná ntị: Ihe ize ndụ nke ujo eletrik. Kwupu ike na fiusi ma ọ bụ sekit breaker tupu echichi ma ọ bụ ọrụ.
• Onye ọrụ ọkụ eletrik ruru eru ga-arụ ọrụ nrụnye ahụ dịka iwu na iwu niile nke mpaghara si dị.
• Gbaa mbọ hụ na ọkọnọ voltage is compatible with the fixture's requirements (100-277V AC).
• Do not handle the fixture with wet hands or when standing on wet or damp elu.
• This fixture is designed for outdoor use and is IP65 rated for wet locations.
• Do not attempt to modify or disassemble the fixture beyond what is described in this manual.

Ihe ngwugwu

Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:

• DAKASON 30W LED Wall Pack Fixture (x2 for 2-pack)
• Photocell (pre-installed)
• Non-photocell cover (for disabling photocell function)
• Ngwa mgbakwunye (skru, waya akụ)
• Akwụkwọ ntuziaka

Njirimara ngwaahịa

• Ike dị irè: Consumes 30 watts, replacing 100-150 watt metal halide lights, saving up to 80% energy.
• Built-in Photocell: Automatically turns the light on at dusk and off at dawn. Can be converted to non-photocell operation.
• Isi na-agbanwe agbanwe: Fixture angle can be adjusted 0-90 degrees for precise light direction.
• Ihe owuwu na-adịgide adịgide: Made of die-cast aluminum housing and tempered glass lens, IP65-rated waterproof and vibration resistant.
• Ogologo ndụ: Maintenance-free LEDs with 50,000 hours of life.

Ntọala & Nwụnye

Follow these steps for proper installation of your DAKASON LED Wall Pack. Ensure power is disconnected before starting.

1. Ịkwanye ihe ndozi

1. Choose a suitable mounting location on a wall or vertical surface, ensuring it can support the fixture's weight.
2. Securely attach the mounting plate to the junction box or wall using appropriate screws and anchors (not included, if required for your surface).
3. Ensure the mounting plate is oriented correctly, typically with 'UP' arrow pointing upwards, to allow proper hinge function.

Image: Diagram illustrating the junction box mounting process, showing the fixture opened to reveal wiring and the separate mounting plate.

2. Njikọ njikọ

1. Connect the fixture's black wire to the supply's live/hot wire.
2. Connect the fixture's white wire to the supply's neutral wire.
3. Connect the fixture's green/ground wire to the supply's ground wire.
4. Use appropriate wire nuts to secure all connections. Ensure connections are tight and insulated.
5. Jiri nlezianya tụba wires niile n'ime igbe njikọ.

3. Securing the Fixture

1. Attach the fixture body to the mounted plate, ensuring it is securely hinged.
2. Close the fixture and tighten any securing screws to ensure a watertight seal.

Image: DAKASON LED Wall Pack installed on a building during heavy rain, demonstrating its IP65 waterproof rating for wet locations.

4. Photocell Configuration (Optional)

The fixture comes with a pre-installed photocell for dusk-to-dawn operation. If you prefer to control the light with a wall switch, you can replace the photocell with the included non-photocell cover.

1. To disable the photocell, carefully disassemble the housing of the lamp to access the photocell.
2. Pull out the existing photocell.
3. Screw in the non-photocell cover into the opening.
4. Kpọkọtanụ lamp ụlọ.

Image: Diagram illustrating the steps to convert the LED wall pack from photocell to non-photocell operation by replacing the sensor with a cover.

Ntuziaka ọrụ

Photocell arụ ọrụ

If the photocell is installed, the fixture will automatically turn on when ambient light levels drop (dusk) and turn off when light levels rise (dawn). Ensure the photocell is not obstructed by objects or other light sources, which could interfere with its operation.

Image: Close-up of the photocell sensor on the DAKASON LED Wall Pack, illustrating its function to automatically turn on at dusk and off at dawn.

Na-edozi isi ọkụ

The fixture's head can be adjusted to direct light as needed. Loosen the adjustment screw on the side of the fixture, pivot the light head to the desired angle (0-90 degrees), and then securely tighten the screw to lock it in place.

Image: Diagram illustrating the 0-90 degree adjustable head feature of the LED wall pack, showing the range of motion.

Nlekọta

The DAKASON LED Wall Pack is designed for minimal maintenance. However, periodic cleaning can help maintain optimal performance.

• Nhicha: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or lens.
• Nyocha: Periodically check the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
• The LEDs are integrated and not user-replaceable.

Nchọpụta nsogbu

If you encounter issues with your LED Wall Pack, refer to the following common problems and solutions:

Nkọwapụta

Image: Dimensions diagram for the DAKASON 30W LED Wall Pack, showing length, width, and height measurements.

Ozi akwụkwọ ikike

This DAKASON LED Wall Pack comes with a 5-afọ akwụkwọ ikike. The warranty is provided by the seller. Please retain your proof of purchase for any warranty claims.

Nkwado ndị ahịa

For any questions, concerns, or issues regarding your DAKASON LED Wall Pack, please contact us through the Amazon Buyer-Seller Messaging Service. Our support team is available to assist you.