PeakTech P 2800A Professional Laser Distance Meter User Manual

1. Okwu mmalite

The PeakTech P 2800A is a professional laser distance meter designed for precise and reliable measurements in various applications, including construction, architecture, and landscaping. This device offers a measurement range from 0.05 meters to 40 meters with high accuracy. It features a multi-line backlit LCD display and quick selection keys for advanced functions such as area, volume, and Pythagorean calculations, as well as addition and subtraction. The internal memory can store up to 99 measurement values for convenient recall. An integrated 90° flip-out stop ensures accurate alignment from edges or corners, enhancing measurement precision.

2. Ntuziaka nchekwa

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in laser radiation exposure, electric shock, fire, or serious injury.

• Nchekwa laser: This device uses a Class 2 laser. Do not stare directly into the laser beam or direct it at other people or reflective surfaces. Laser radiation can cause eye injury.
• Nchekwa batrị: Use only specified alkaline AAA batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
• gburugburu arụ ọrụ: Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from water and high humidity.
• Nlekọta: Do not attempt to modify or disassemble the device. Repairs should only be performed by qualified personnel.

3. Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu:

• PeakTech P 2800A Laser Distance Meter
• Akpa eriri
• Batrị Alkaline AAA 2 x 1.5V
• User Manual (German and English)
• Nkwenye nhazi nhazi

4. Ngwaọrụ gafereview

Familiarize yourself with the components and controls of your PeakTech P 2800A Laser Distance Meter.

Foto 1: PeakTech P 2800A Laser Distance Meter front view, showing the multi-line LCD display and control buttons. This image provides a general overview of the device's layout.

Foto 2: PeakTech P 2800A Laser Distance Meter mounted on a mini tripod, demonstrating its tripod thread for stable and precise measurements, especially over longer distances.

Foto 3: Agara nso view of the integrated bubble level on the PeakTech P 2800A Laser Distance Meter, used to ensure the device is perfectly horizontal for accurate measurements.

Foto 4: PeakTech P 2800A Laser Distance Meter with its 90-degree flip-out stop extended, used for precise measurements from edges or corners, ensuring the measurement starts exactly from the reference point.

Key Buttons and Display Elements:

• MEAS (Red Button): Initiates measurement, confirms selections.
• OFF/CLEAR (Red Button): Powers off the device, clears current measurement/selection.
• UNIT: Changes measurement units (m, in, ft).
• +: Addition function, navigates menus.
• -: Subtraction function, navigates menus.
• Area/Volume Button: Toggles between area and volume measurement modes.
• Pythagorean Button: Activates indirect measurement modes.
• Reference Point Button: Changes the measurement reference point (front, rear, flip-out stop).
• Bọtịnụ ebe nchekwa: Accesses stored measurements.
• Bọtịnụ ọkụ azụ: Toggles display backlight.
• Ngosipụta LCD: Multi-line display showing current measurements, previous results, and function icons.

5. Nhazi

5.1 Ntinye batrị

1. Chọta mkpuchi nke ebe batrị dị n'azụ ngwaọrụ ahụ.
2. Dụgharịa ma ọ bụ kpọchie mkpuchi ka imepe oghere ahụ.
3. Tinye batrị alkaline abụọ nke 1.5V AAA, na-ahụ na polarity ziri ezi (+/-).
4. Mechie mkpuchi nke batrị batrị nke ọma.

The device will automatically power on or can be powered on by pressing the MEAS bọtịnụ.

6. Ntuziaka ọrụ

6.1 Gbanyụọ ma ọ bụ gbanyụọ

• Ike Na: Pịa MEAS bọtịnụ.
• Gbanyụọ: Pịa ma jide Gbanyụọ/Hichapụ button for a few seconds, or the device will automatically power off after approximately 150 seconds of inactivity.

6.2 Na-agbanwe nkeji nha

Pịa UNIT button repeatedly to cycle through the available units: meters (m), inches (in), and feet (ft).

6.3 Setting the Reference Point

The device can measure from its front edge, rear edge, or the extended 90° flip-out stop. Press the Ebe ntụaka button to switch between these options. The current reference point is indicated on the display.

6.4 Nha Anya Otu

1. Point the laser at the target.
2. Pịa MEAS button once to activate the laser.
3. Pịa MEAS button again to take the measurement. The result will be displayed.

6.5 Ntụle Na-aga n'ihu (Oke/Max)

1. Pịa ma jide MEAS button for approximately 2 seconds. The device will enter continuous measurement mode.
2. Move the device slowly to measure different points. The display will show the current, minimum, and maximum measured distances.
3. Pịa MEAS again to stop continuous measurement.

6.6 Nleta Mpaghara

1. Pịa Mpaghara/olu button once to enter area measurement mode. An icon for area will appear on the display.
2. Measure the first side (e.g., length) by pressing MEAS.
3. Measure the second side (e.g., width) by pressing MEAS.
4. The calculated area will be displayed.

6.7 nha nha

1. Pịa Mpaghara/olu button twice to enter volume measurement mode. An icon for volume will appear.
2. Measure the length by pressing MEAS.
3. Measure the width by pressing MEAS.
4. Measure the height by pressing MEAS.
5. The calculated volume will be displayed.

6.8 Pythagorean Measurement (Indirect Measurement)

This function allows indirect measurement of heights or distances using the Pythagorean theorem. There are typically several modes (e.g., two-point, three-point). Refer to the on-screen icons for guidance.

1. Pịa Pythagorean button to select the desired indirect measurement mode.
2. Follow the on-screen prompts to take the required measurements (e.g., hypotenuse, base).
3. The device will calculate and display the unknown height or distance.

6.9 Mgbakwunye na Mwepụ

After taking a measurement, you can add or subtract subsequent measurements:

1. Were nha.
2. Pịa + button for addition or - button for subtraction.
3. Take the next measurement. The result will be added to or subtracted from the previous value.
4. Tinyegharịa dịka achọrọ.

6.10 Ọrụ ebe nchekwa

The device can store up to 99 measurement values.

• Ụlọ ahịa: Measurements are automatically stored.
• Cheta: Pịa Ebe nchekwa bọtịnụ ka view stored values. Use the + na - buttons to scroll through the memory.
• Kpochapụ ebe nchekwa: Refer to the detailed user manual for specific instructions on clearing memory, as this may vary.

7. Nlekọta

• Nhicha: Jiri nwayọọ, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Clean the laser lens carefully with a soft cloth, similar to cleaning camera lenses.
• Nchekwa: Store the device in its belt pouch in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• Ngbanwe batrị: Dochie batrị mgbe ihe ngosi batrị dị ala pụtara na ngosipụta ahụ.

8. Nchọpụta nsogbu

9. Nkọwapụta

10. Akwụkwọ ikike na nkwado

PeakTech products are manufactured with high quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your local PeakTech distributor. For technical support or service inquiries, please visit the official PeakTech websaịtị ma ọ bụ kpọtụrụ ngalaba ọrụ ndị ahịa ha.