Kohler 76331-CP Shower Arm with 2-Way Diverter Instruction Manual

1. Ngwaahịa gafereview

The Kohler 76331-CP Shower Arm with 2-Way Diverter is a wall-mount fixture designed to direct water flow between a showerhead and a handshower. Constructed from brass, this unit features a polished chrome finish, engineered to resist corrosion and tarnishing. It includes a flange for installation and is compatible with standard 1/2-inch NPT connections.

Image 1.1: The Kohler 76331-CP Shower Arm with 2-Way Diverter, showcasing its polished chrome finish and integrated diverter mechanism.

2. Ozi nchekwa

• Gbanyụọ isi mmiri mgbe niile tupu ịmalite nrụnye ma ọ bụ mmezi ọ bụla.
• Yiri akụrụngwa nchebe kwesịrị ekwesị, dị ka ugogbe nchekwa na uwe aka.
• Ọ bụrụ na ịmaghị maka akụkụ ọ bụla nke usoro nrụnye, kpọtụrụ onye na-ahụ maka plumber tozuru oke.
• Gbaa mbọ hụ na njikọ niile echekwabara iji gbochie ntapu.
• Do not overtighten connections, as this can damage the product or plumbing.

3. Ihe ngwugwu

Nyochaa na akụrụngwa niile dị tupu ịmalite nrụnye.

• Shower Arm with 2-Way Diverter
• Flange

Note: Showerheads, handshowers, and additional flanges (K-76334 Traditional flange, K-76335 Square flange) are sold separately.

4. Nkọwapụta

5. Ntuziaka nwụnye

5.1 Ngwaọrụ na Ihe Ndị A Chọrọ (Agaghị Agbakwunyere)

• mgbanaka nwere ike idozi
• Plumber's tape (thread sealant)
• Uwe dị nro

5.2 Nzọụkwụ nwụnye

1. Gbanyụọ Ọsọ Mmiri: Locate and turn off the main water supply to your shower area. Open existing shower faucets to relieve pressure.
2. Remove Existing Shower Arm (if applicable): Unscrew the existing shower arm from the wall fitting. Clean any old sealant or debris from the wall pipe threads.
3. Prepare New Shower Arm: Apply plumber's tape clockwise around the threaded end of the new Kohler shower arm (the end that connects to the wall). Ensure several wraps for a watertight seal.
4. Install Flange: Slide the decorative flange over the shower arm, ensuring it faces the wall.
5. Attach Shower Arm to Wall: Carefully thread the shower arm into the 1/2-inch NPT wall fitting. Hand-tighten first, then use an adjustable wrench to tighten an additional 1/2 to 1 full turn until secure and properly oriented. Do not overtighten.
6. Position Flange: Slide the flange flush against the wall to cover the opening.
7. Install Showerhead and Handshower: Attach your desired showerhead to the top outlet and your handshower hose to the bottom outlet of the diverter. Apply plumber's tape to these connections as well.
8. Nwale maka ntapu: Slowly turn the main water supply back on. Check all connections for leaks. If leaks occur, turn off water, tighten connections slightly, and re-test.

6. Ntuziaka ọrụ

The 2-way diverter allows you to easily switch water flow between your main showerhead and a connected handshower.

• To use the Showerhead: Ensure the diverter handle is in the position that directs water upwards to the showerhead.
• To use the Handshower: Rotate the diverter handle to the position that directs water downwards to the handshower.
• To turn off water: Use your shower's main faucet handle to stop the water flow. The diverter only controls the direction of water, not the on/off function or temperature.

7. Nlekọta na nlekọta

• Nhicha: Clean the polished chrome finish with a soft, damp akwa . Zere ihe nchacha abrasive, kemịkalụ siri ike, ma ọ bụ ihe nkpuchi, n'ihi na ndị a nwere ike imebi njedebe.
• Nhicha ncha: For water spots, use a mild soap solution and rinse thoroughly with clean water, then dry with a soft cloth.
• Nyocha oge niile: Periodically check connections for any signs of leaks or corrosion.

8. Nchọpụta nsogbu

9. Akwụkwọ ikike na nkwado

For specific warranty information and customer support, please refer to the official Kohler website or contact Kohler directly. Keep your purchase receipt for warranty claims.

Kohler Official Websaịtị: www.kohler.com