AIBOO Linkable Under Cabinet LED Lighting System User Manual

1. Okwu mmalite

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting System. This system features hardwired 12V slim aluminum dimmable puck lights with a wireless controller, designed for ambiance lighting in various indoor settings. Please read this manual thoroughly before installation and use.

2. Ozi nchekwa dị mkpa

• Nchekwa Eletriki: This product is designed for 110V/120Vac input and requires hardwiring. Installation should be performed by a qualified electrician or an individual with intermediate knowledge of electrical wiring to prevent electric shock or fire hazards. Ensure power is disconnected at the circuit breaker before any installation or maintenance.
• No Wall Plug: This system does NOT include a wall plug power adapter. It is intended for direct wiring into your electrical system.
• Eji ime ụlọ naanị: This lighting system is designed for indoor use in dry locations. Do not expose to moisture or water.
• Igwe ikuku: Ensure adequate ventilation around the LED driver to prevent overheating.
• Ndakọrịta akụrụngwa: Use only the components provided or specified by AIBOO. Using incompatible parts may damage the system or pose a safety risk.

3. Ihe ngwugwu

Nyochaa na etinyere ihe niile edepụtara n'okpuru na ngwugwu gị:

• LED Puck Lights (6 units)
• RF Wireless Remote Control (1 unit)
• LED Controller (1 unit)
• 12V 1A Hardwired LED Driver (Power Adapter) (1 unit)
• 5ft Extension Cords (2 units)
• 6-Way Splitter (1 unit)
• Mounting Stickers (12 units)
• Mounting Screws (12 units)

4. Nkọwapụta ngwaahịa

5. Ntọala na nwụnye

Before beginning installation, ensure the main power supply to the installation area is turned off at the circuit breaker.

5.1 Wiring Diagram Overview

5.2 Hardwired Power Adapter Connection

The system includes a hardwired power adapter (LED Driver) designed to connect directly to a 110V/120Vac circuit. This adapter converts AC power to 12V DC for the LED lights. A wall plug is not included.

1. Gbanyụọ ọkụ na isi sekit.
2. Connect the input wires of the LED driver to your 110V/120Vac circuit wiring. Ensure proper polarity (live to live, neutral to neutral, ground to ground) according to local electrical codes.
3. Secure all connections with appropriate wire connectors.

5.3 Connecting the Puck Lights

The puck lights can be connected in two primary configurations: Series Connection or Parallel Connection.

5.3.1 Njikọ Njikọ

In a series connection, the puck lights are linked one after another. This method is suitable for linear installations where lights are spaced evenly in a line.

1. Connect the LED controller to the output of the hardwired LED driver.
2. Connect the first puck light to the LED controller.
3. Connect the subsequent puck lights to each other using their integrated cables.
4. Use extension cords if additional length is required between lights.

5.3.2 Njikọ njikọ

For installations requiring lights to branch out from a central point, the 6-way splitter allows for parallel connection.

1. Connect the LED controller to the output of the hardwired LED driver.
2. Connect the 6-way splitter to the LED controller.
3. Connect individual puck lights to the available ports on the 6-way splitter.
4. Use extension cords if additional length is required for individual lights.

5.4 Mounting the Puck Lights

The puck lights can be mounted using either the provided screws or adhesive stickers.

1. Nkwadebe elu: Ensure the mounting surface is clean, dry, and smooth.
2. Nrikwa nrapado: Peel the backing from the adhesive sticker and firmly press the puck light onto the desired surface. Hold for 30 seconds to ensure a strong bond.
3. Ịkwanye Screw: Use the provided screws to secure the puck lights to the surface. Pre-drilling pilot holes may be necessary depending on the material.

6. Ntuziaka ọrụ

The AIBOO LED Lighting System is controlled by an RF wireless remote control.

6.1 Ọrụ njikwa anya

• Gbanyụọ/gbanyụọ: Pịa ON button to turn the lights on, and the Gbanyụọ button to turn them off.
• Ndozi ihie:
  • Pịa LIGHT + or LIGHT - to gradually increase or decrease brightness (stepless dimming).
  • Jiri ihe 100%, 50%, 25% buttons for quick brightness presets.
• Na-ejikọta: To pair the remote with the controller, press the Jikọọ button within 5 seconds of powering on the lights until the lights flicker.
• Decoding (1 to More Pair): To pair one remote with multiple controllers, press the Dekọọ button within 5 seconds of powering on the lights until the lights flicker.
• Ọrụ oge: Pịa 1H, 2H, 4H, ma ọ bụ 8H to set the lights to automatically turn off after 1, 2, 4, or 8 hours, respectively.

7. Nlekọta

The AIBOO LED Lighting System requires minimal maintenance.

• Nhicha: Ensure the lights are off and cool before cleaning. Wipe the puck lights and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Nyocha: Periodically check all connections for tightness and inspect cables for any signs of damage.
• Ngbanwe batrị: The remote control requires 1 CR2 battery. Replace the battery when the remote's range decreases or it stops responding.

8. Nchọpụta nsogbu

If you encounter issues with your AIBOO LED Lighting System, refer to the following common problems and solutions:

9. Akwụkwọ ikike Ozi

AIBOO products are manufactured to high-quality standards. For specific warranty details regarding your Linkable Under Cabinet LED Lighting System, please refer to the warranty card included with your purchase or visit the official AIBOO websaịtị. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.

10. Nkwado ndị ahịa

For technical assistance, troubleshooting, or product inquiries, please contact AIBOO customer support.

• Nkwado Ndị Ahịa Dị Ndụ na US: Mọnde - Fraịde, 9 nke ụtụtụ - 5 nke mgbede (EST)
• Akụrụngwa dị n'ịntanetị: Gaa leta AIBOO Store on Amazon maka ozi ngwaahịa na nkwado ndị ọzọ.