Sonic Alert 120/220 Volt Travel Size Alarm Clock/Bed Shaker

Okwu mmalite

This manual provides detailed instructions for the setup, operation, and maintenance of your Sonic Alert 120/220 Volt Travel Size Alarm Clock with Super Shaker. Please read this manual thoroughly before using the product to ensure proper function and longevity.

An image showing the Sonic Alert alarm clock with a green digital display showing '8:16', connected to a white circular Super Shaker bed vibrator. The clock features control buttons on top and a volume knob on the side.

Melite

1. Iwepu: Carefully remove all components from the packaging. Verify that you have the alarm clock unit, the Super Shaker vibrating unit, and the power cord.
2. Njikọ ike: Connect the power cord to the alarm clock and then plug it into a standard electrical outlet. This alarm clock is designed to operate on both 120V and 220V systems, making it suitable for international travel.
3. Nwụnye ndabere batrị: For battery backup, install a 9-volt battery (not included) into the battery compartment located on the bottom of the unit. This backup maintains time and alarm settings for up to one week during power outages.
4. Connecting the Super Shaker: Plug the Super Shaker vibrating unit's cord into the designated jack on the back of the alarm clock. Place the Super Shaker under your pillow or mattress for effective vibration.
5. Ntọala Oge Mmalite: Upon first power-up, the display may flash. Refer to the 'Operating Instructions' section to set the current time.

Ntuziaka ọrụ

• Setting Time (12/24-Hour Format):
  Pịa ma jide OGE button. While holding, use the Ọsọ na Nwayọọ nwayọọ buttons to adjust the hours and minutes. Release the OGE button when the correct time is displayed. To switch between 12-hour and 24-hour formats, press the 12/24 HR bọtịnụ.
• Setting Alarms (AL1, AL2):
  This unit features dual alarms. Press and hold the AL. SET button for Alarm 1 (AL1) or Alarm 2 (AL2). While holding, use the Ọsọ na Nwayọọ nwayọọ buttons to set the desired alarm time. Release the AL. SET button. To activate an alarm, slide the corresponding AL1 or AL2 switch to the desired mode (VIB/BUZZ, VIB, BUZZ).
• Adjusting Alarm Duration:
  The alarm duration can be set from 1 minute to 59 minutes. Consult the full manual for specific button sequences, typically involving the AL. SET button and time adjustment buttons.
• Adjusting Snooze Time:
  The snooze time can be selected from 1 minute to 30 minutes. Press the URUA button during an active alarm to temporarily silence it for the set duration.
• Ụdị mkpu:
  Use the slide switch on the side of the unit to select the alarm mode for each alarm (AL1 and AL2):
  • VIB/BUZZ: Activates both vibration and audible alarm.
  • VIB: Activates vibration only.
  • BUZZ: Activates audible alarm only.
  • Gbanyụọ: Gbanyụọ mkpu.
• Ndozi olu:
  Tugharia ihe VOL knob located on the side of the unit to adjust the audible alarm volume.
• Ọrụ dimmer:
  Pịa 5-LEVEL DIMMER button to cycle through five brightness levels for the display.

Nlekọta

• Nhicha: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the unit. Do not use liquid cleaners or abrasive materials.
• Ngbanwe batrị: Replace the 9-volt battery in the backup compartment annually or if the display flashes during a power outage, indicating low battery.

Nchọpụta nsogbu

• Alarm Not Sounding/Vibrating:
  • Ensure the alarm is activated and the mode switch is not set to OFF.
  • Check if the Super Shaker is properly connected.
  • Verify the volume knob is turned up for audible alarms.
• Ngosipụta anaghị arụ ọrụ:
  • Lelee ma ọ bụrụ na e tinyere eriri ike ahụ n'ime oghere na-arụ ọrụ nke ọma.
  • If using battery backup, ensure the battery is fresh and correctly installed.
• Ngosipụta Oge Na-ezighi Ezi:
  • Reset the time as per the 'Setting Time' instructions.
  • If the time consistently loses accuracy, consider replacing the backup battery.

Nkọwapụta

• Alarm Loudness: 113dB extra-loud alarm
• Isi mmalite ike: Corded Electric (120/220 Volt compatible), Battery Powered (9V for backup)
• Ụdị ngosi: Digital, Jumbo Size
• Alarm Features: Dual alarm, adjustable tone & volume, selectable snooze (1-30 min), selectable alarm duration (1-59 min)
• Ụdị oge: 12-hour / 24-hour
• Ike ike: Green technology uses 60% less energy
• Dimmers: 5-level dimmer function
• Gụnyere: Power cord, Super Shaker vibrating unit

Akwụkwọ ikike na nkwado

This Sonic Alert product is covered by a 1-year Sonic Alert blastproof warranty. For warranty claims or technical support, please contact Sonic Alert directly. Do not attempt to open the unit or remove any labels, as this may void the warranty. There are no user-serviceable parts inside.

For further assistance, please visit the official Sonic Alert websaịtị ma ọ bụ rụtụ aka na ozi kọntaktị enyere na nkwakọ ngwaahịa gị.