RCF Evox 12 Portable Array Powered Active Speaker System User Manual

Okwu mmalite

This manual provides essential information for the safe and efficient operation of your RCF Evox 12 Portable Array Powered Active Speaker System. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

Ngwaahịa gafereview

The RCF EVOX 12 is a high-performance 1400-watt PA System designed for live sound applications. It features a powerful 15-inch subwoofer and a 4-inch top array, delivering balanced and clear audio. The system is built with durable components, offering a maximum Sound Pressure Level (SPL) of 130dB. Integrated Digital Signal Processing (DSP) optimizes sound performance. Its design includes built-in wheels and a handle for enhanced portability, making it suitable for small to medium-sized event environments.

Foto: N'ihu view of the RCF Evox 12 Portable Array Powered Active Speaker System, showcasing the subwoofer unit with the RCF logo and the speaker grille.

Kedu ihe dị na Igbe ahụ

Upon unpacking, verify that all listed components are present and in good condition:

• 1 x EVOX 12 Subwoofer Unit
• 1 x EVOX 12 Column Array (Top Speaker)
• 1 x Speaker Pole for mounting the column array
• 1 x nkwụnye ọkụ
• 2 x RCF Bags (for transport and protection)
• Akwụkwọ ntuziaka onye ọrụ 1 x (akwụkwọ a)

Ntuziaka nhazi

1. Nkwanye: Position the EVOX 12 subwoofer on a stable, flat surface. Ensure adequate ventilation around the unit.
2. Mounting the Column Array: Insert the speaker pole into the designated pole mount on top of the subwoofer unit. Secure the pole firmly. Carefully attach the column array speaker to the top of the speaker pole. Ensure it is stable and locked into place.
3. Njikọ ike: Connect the power adaptor to the EVOX 12 subwoofer's power input and then to a suitable AC power outlet.
4. Ntinye odiyo: Connect your audio source (mixer, instrument, microphone) to the XLR input connectors on the subwoofer unit. The EVOX 12 supports XLR connectivity.
5. Ike sistemu: Before powering on, ensure all volume controls are set to minimum. Power on your audio source devices first, then power on the EVOX 12 system.

Ntuziaka ọrụ

• Njikwa olu: Gradually increase the master volume control on the EVOX 12 subwoofer to the desired listening level. Adjust individual input levels on your audio source as needed.
• Ntọala DSP: The EVOX 12 features onboard DSP. Refer to the control panel for available presets (e.g., Flat, Boost, Playback, Club) and select the one that best suits your application and environment.
• Ntinye ntinye: Adjust the input gain for each connected source to prevent clipping and ensure optimal signal-to-noise ratio.
• Usoro gbanyụọ ike: When finished, first turn down the master volume on the EVOX 12, then power off the system, followed by your audio source devices.

Nlekọta

• Nhicha: Use a soft, dry cloth to clean the exterior surfaces of the speaker system. Avoid using abrasive cleaners or solvents.
• Nchekwa: When not in use, store the EVOX 12 in a dry, cool environment, preferably in its protective bags, to prevent dust accumulation and physical damage.
• Njikwa USB: Ensure all cables are properly coiled and secured during transport and storage to prevent damage.
• Nyocha: Periodically inspect cables, connectors, and the speaker pole for any signs of wear or damage. Replace damaged components immediately.

Nchọpụta nsogbu

Nkọwapụta

Akwụkwọ ikike na nkwado

The RCF Evox 12 Portable Array Powered Active Speaker System comes with a Akwụkwọ ikike nwere oke ụbọchị 90. This warranty covers manufacturing defects under normal use. For warranty claims or technical support, please contact RCF customer service or your authorized dealer. Keep your proof of purchase for warranty validation.

For further assistance, you may visit the official RCF website or consult their online resources for FAQs and additional support documentation.