Okwu mmalite
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
Ozi nchekwa
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
Ihe ngwugwu
Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- Usoro latch
- Strike plate (ASA Strike)
- Ịgbanye kposara
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
Ntọala na nwụnye
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1. Nkwadebe n'ọnụ ụzọ
Ensure your door is prepared with the following standard dimensions:
- Cross Bore: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 inch (25 mm) diameter
- Mbido: 2-3/4 sentimita (70 mm)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- Secure the latch with the provided screws.
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. Install Strike Plate
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- Secure the strike plate with the provided screws.
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
Ntuziaka ọrụ
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
Mara: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
Nlekọta
Nlekọta mgbe niile na-eme ka mkpọchi gị dị ogologo ma na-arụ ọrụ nke ọma.
- Nhicha: Jiri nwayọ hichaa elu mpụta, damp cloth. Avoid abrasive cleaners or solvents, which can damage the finish.
- mmanu mmanu: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- Nyocha: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Lever is stiff or hard to turn. | Accumulation of dirt or lack of lubrication. | Clean the mechanism and apply graphite lubricant. |
| Latch bolt does not retract fully. | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| Door rattles when closed. | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | 129002 |
| Usoro | Usoro 2500 |
| Ụdị mkpọchi | Cylindrical Passage Lock (Non-locking) |
| Ihe onwunwe | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| Mechaa | Satin Chrome |
| Ụdị Lever | Withnell |
| Mbido | 2-3/4 sentimita (70 mm) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 inch (25 mm) diameter |
| Ntuzi aka | Enweghị aka |
| Ọkwa | Grade 2 (Standard Duty Commercial) |
| Efere efere | Ọnụ ego nke ASA |
| Ngwa gụnyere | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
Ozi akwụkwọ ikike
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
Nkwado ndị ahịa
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Websaịtị: Visit the official Hager websaịtị maka akụrụngwa nkwado na ozi kọntaktị.
- Kpọtụrụ: Refer to the packaging or Hager's website for phone numbers or email addresses.
When contacting support, please have your model number (129002) and purchase details available.