9 Volt Metal Detector 6-inch Wand Scanner User Manual

Okwu mmalite

This manual provides essential information for the safe and effective operation of your Cen-Tech 9 Volt Metal Detector 6-inch Wand Scanner. This device is designed to locate metal objects, particularly those embedded in wood, and can also serve as a security scanning tool. Please read this manual thoroughly before use and retain it for future reference.

Image: The Cen-Tech 9 Volt Metal Detector, a black handheld wand with yellow "CEN-TECH" branding.

Ozi nchekwa

• Always operate the device in a safe manner.
• Ewepụla ngwaọrụ ahụ na oke okpomọkụ ma ọ bụ iru mmiri.
• Debe ebe ụmụaka na-apụghị iru.
• Tụfuo batrị nke ọma dịka iwu mpaghara siri dị.
• Do not attempt to modify or repair the device yourself. Refer to qualified service personnel.

Ihe ngwugwu

• Cen-Tech 9 Volt Metal Detector Wand Scanner
• Akpa nchekwa
• Akwụkwọ ntuziaka (akwụkwọ a)

Note: A 9V battery is required for operation and is sold separately.

Ntọala: Ntinye Batrị

The Cen-Tech Metal Detector requires one 9-volt battery for operation.

1. Locate the battery compartment cover, typically on the handle or rear of the device.
2. Dụgharịa ma ọ bụ kpọchie mkpuchi ka imepe oghere ahụ.
3. Insert a fresh 9-volt battery, ensuring the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
4. Dochie mkpuchi nke batrị batrị nke ọma.
5. Ngwa a adịla njikere maka ojiji.

Ntuziaka ọrụ

Ịgbanyụ/ Gbanyụọ

• To turn the detector ON, slide the power switch to the "ON" position. You may hear a brief beep and see an LED light up, indicating it is active.
• To turn the detector Gbanyụọ, slide the power switch to the "OFF" position.

Detecting Metal

• Hold the wand scanner by the handle and sweep the 6-inch wand head slowly and steadily over the area you wish to scan.
• When metal is detected, the device will emit an audio alarm (a distinct beeping sound) and/or activate the LED visual alert (a flashing light). The intensity of the alarm may increase as you get closer to the metal object.
• Pinpoint the exact location by narrowing your sweep area once an alarm is triggered.

Mbelata mmetụta uche

• The detector features a 50% sensitivity reduction button. Press and hold this button to temporarily decrease the sensitivity of the detector. This is useful for scanning in areas with high levels of ambient metal or when trying to ignore smaller, less significant metal objects.
• Release the button to return to full sensitivity.

Nlebanya batrị dị ala

• The device is equipped with a low battery alert. When the battery power is low, the detector's performance may diminish, and a specific indicator (e.g., a continuous low tone or a specific LED pattern) will activate.
• Replace the 9-volt battery immediately when the low battery alert is active to ensure optimal performance.

Atụmatụ

• Detects metal embedded in wood.
• May also be used as a security scan device.
• 6-inch wand for one-pass coverage.
• Audio alarm and LED visual alert.
• 50% sensitivity reduction button.
• Ọkwa batrị dị ala.
• Comes with a handy carrying case.

Nlekọta

• Nhicha: Wipe the detector with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Nchekwa: When not in use, store the detector in its provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Batrị: Remove the battery if the device will not be used for an extended period to prevent leakage and damage.

Nchọpụta nsogbu

Nkọwapụta

Akwụkwọ ikike na nkwado

Cen-Tech products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Cen-Tech websaịtị. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.

For further assistance, you may contact Cen-Tech customer service through their official channels. Always provide your product model number (94138) when seeking support.