Avidsen 103800 Programmable Timer Socket User Manual

Okwu mmalite

This manual provides instructions for the safe and efficient use of your Avidsen 103800 Programmable Timer Socket. This device is designed to automatically control the power supply to household appliances, allowing for scheduled operation.

Ozi nchekwa

Maka naanị ime ụlọ.
Do not exceed the maximum load of 3500 W (16A).
Ensure the appliance connected does not exceed the timer's power rating.
Do not immerse in water or expose to moisture.
Debe ebe ụmụaka na-apụghị iru.
Etusala ma ọ bụ nwaa ịrụkwa ngwaọrụ ahụ.

Ngwaahịa gafereview

The Avidsen 103800 is a mechanical programmable timer socket. It features a rotating dial with segments for setting ON/OFF times.

Figure 1: Avidsen 103800 Programmable Timer Socket. This image shows the front view of the white timer socket, highlighting the central rotating dial for programming and the socket outlet.

Atụmatụ igodo

Easy to operate programmable socket.
Minimum programming interval: 15 minutes.
Maximum power capacity: 3500 W.
Current rating: 16A.
Ezubere maka ime ụlọ.

Melite

Initial Plug-in: Plug the Avidsen 103800 timer into a standard 230V, 50Hz wall socket.
Tọọ oge ugbu a: Rotate the central dial clockwise until the arrow indicator aligns with the current time of day. The dial is marked in 24-hour format.
Mmemme ịgbanwuo/gbanyụọ oge: The dial is divided into segments, each representing 15 minutes. Push down the segments corresponding to the times you want the connected appliance to be ON. Leave the segments up for the times you want the appliance to be OFF.
Jikọọ Ngwa: Plug the appliance you wish to control into the timer socket.
Họrọ Ụdị Ọrụ: The timer typically has a switch for different modes (e.g., ON, OFF, TIMER). Set this switch to the "TIMER" position for automatic operation.

Note: The timer does not require batteries as it is mains powered.

Na-arụ ọrụ

Once set up, the timer will automatically switch the connected appliance ON and OFF according to your programmed schedule.

Ntugharị akwụkwọ ntuziaka

If your timer has a manual override switch (often labeled ON/OFF/TIMER), you can temporarily bypass the programmed schedule:

NA: The appliance will remain continuously ON, ignoring the timer settings.
Gbanyụọ: The appliance will remain continuously OFF, ignoring the timer settings.
Oge: The appliance will operate according to the programmed schedule.

Refer to the specific markings on your device for exact switch positions.

Nlekọta

Nhicha: Disconnect the timer from the wall socket before cleaning. Wipe the exterior with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
Nchekwa: Chekwaa ngụ oge n'ebe dị jụụ, kpọrọ nkụ mgbe anaghị eji ya.
Nyocha: Periodically check the timer and its plug for any signs of damage. Do not use if damaged.

Nchọpụta nsogbu

Okwu na ngwọta nkịtị
Nsogbu	Ihe nwere ike ime	Ngwọta
Ngwa anaghị agbanye/ Gbanyụọ n'oge mmemme.	Timer not set to "TIMER" mode. A naghị ewepụ/ebuli akụkụ nke ọma. Edobeghị oge ugbu a nke ọma. Appliance not plugged in or faulty.	Ensure the mode switch is in the "TIMER" position. Verify all desired ON/OFF segments are correctly positioned. Re-adjust the current time on the dial. Check appliance power and connection.
Timer is not working at all.	Enweghị ike na oghere mgbidi. Ihe na-egosi oge adịghị mma.	Test the wall socket with another appliance. If the socket works, the timer may be faulty. Contact support.

Nkọwapụta

Ụdị: Avidsen 103800
Ụdị: Programmable Mechanical Timer Socket
Ntinye Voltage: 230V AC, 50 Hz
Oke. Ibu: 3500 W / 16A
Minimum Setting Unit: 15 nkeji
Ngwa: Eji ime ụlọ naanị
Agba: Ọcha
Ihe: Plastic
Akụkụ (Ngwugwu): 23.1 x 13.9 x 8.5 cm
Ibu (Ngwugwu): 210 g
GTIN: 03660211038000

Akwụkwọ ikike na nkwado

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Avidsen websaịtị. Debe ihe akaebe nke ịzụrụ maka akwụkwọ ikike.

Onye nrụpụta: AVIDSEN

Kpọtụrụ: Maka nkwado, biko gaa na www.avidsen.com

AVIDSEN 103800