Eheim 3616090
EHEIM Jager Aquarium Thermostat Heater 150W Instruction Manual
Model: 3616090 | Brand: Eheim
Okwu mmalite
The EHEIM Jager Aquarium Thermostat Heater 150W is designed to provide precise and reliable temperature control for your aquarium. All EHEIM Heater models are 100% fully submersible and feature a TruTemp dial for accurate temperature recalibration. This manual provides essential information for the safe and effective use of your heater.
Njirimara ngwaahịa
- Enwere ike imikpu mmiri nke ọma: Designed for complete immersion in water.
- Thermo safety control: Protects against running dry by automatically turning off when water level dips too low.
- TruTemp dial: Allows recalibration of the heater within a +/- 0.5°F degree accuracy for precise temperature regulation.
- Owuwu na-adịgide adịgide: Made of shock-resistant and shatter-proof glass, suitable for both fresh and marine water aquariums.
- Ìhè mgbanyụ ma ọ bụ gbanyụọ: Provides at-a-glance monitoring of heater operation.
Ntuziaka nhazi
Before initial use, please read the full user guide PDF for detailed instructions. Below are general steps for setting up your EHEIM Jager Heater:
- Ịkwapu: Carefully remove the heater from its packaging. Inspect for any visible damage.
- Nkwanye: Position the heater vertically and fully submerged in your aquarium. Ensure it is placed in an area with good water circulation for even heat distribution. Use the included suction cups to secure it to the aquarium glass.
- Ntọala okpomọkụ: Use the TruTemp dial at the top of the heater to set your desired water temperature. It is recommended to use an external thermometer to verify the actual water temperature and fine-tune the heater setting if necessary.
- Nkwalite: Allow the heater to acclimate to the aquarium water temperature for at least 20-30 minutes before plugging it in.
- Njikọ ike: Plug the heater into a grounded electrical outlet. The indicator light will illuminate when the heater is actively heating.

Figure 1: The EHEIM Jager Aquarium Thermostat Heater 150W shown in its original packaging, highlighting its design and robust construction.

Figure 2: A visual representation of the EHEIM Jager Aquarium Thermostat Heater, indicating its length of 14 inches (34 cm), which is important for tank placement.
Ntuziaka ọrụ
Once installed and powered on, the EHEIM Jager Heater will automatically maintain the set temperature. The internal thermostat will cycle the heating element on and off as needed. The indicator light will show when the heater is actively heating.
- Ndozi okpomọkụ: To change the temperature, gently turn the blue TruTemp dial at the top of the heater. Rotate clockwise to increase temperature and counter-clockwise to decrease it. Make small adjustments and allow time for the water temperature to stabilize before making further changes.
- Nleba anya: Regularly monitor your aquarium's temperature with a reliable external thermometer to ensure the heater is functioning correctly and maintaining the desired temperature.
Nlekọta
Proper maintenance ensures the longevity and efficiency of your heater. Always unplug the heater and allow it to cool completely before handling or performing any maintenance.
- Nhicha mgbe niile: Periodically remove the heater from the aquarium and gently wipe down the glass tube to remove algae or mineral deposits. Use a soft cloth or sponge; avoid abrasive materials.
- Lelee maka mmebi: Before re-installing, carefully inspect the glass tube and power cord for any cracks, chips, or fraying. Do not use the heater if any damage is observed.
- Iko mmiri ara: Check the suction cups for wear and tear. Replace them if they lose their grip to ensure the heater remains securely in place.
Nchọpụta nsogbu
If you encounter issues with your EHEIM Jager Heater, consider the following common troubleshooting steps:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Heater not heating / Indicator light off |
|
|
| Water temperature too high/low |
|
|
For more complex issues, refer to the official user guide or contact Eheim customer support.
Nkọwapụta
| Njirimara | Uru |
|---|---|
| Aha ika | Eheim |
| Nọmba Nlereanya ihe | 3616090 |
| Wattage | 150 Watt |
| Ibu Ibu | 0.72 Pound (11.5 ounces) |
| Akụkụ ihe (LxWxH) | 1.42 x13.58 inch |
| Ihe onwunwe | Glass |
| Agba | Ọlaọcha, Nwa |
| Onye nrụpụta | Eheim |
| Ụbọchị mbụ dị | Ọnwa Isii 25, 2004 |
Akwụkwọ ikike na nkwado
For detailed warranty information and customer support, please refer to the official EHEIM user guide PDF available for download or visit the Eheim websaịtị. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.
Ntuziaka onye ọrụ (PDF): Download Ebe a
Akwụkwọ ndị emetụtara - 3616090
![]() |
Ahụmahụ EHEIM 150 & 250 Außenfilter - Bedienungsanleitung Detaillierte Bedienungsanleitung, technische Informationen, Montage-, Installations-, Inbetriebnahme- und Wartungshinweise für die EHEIM eExperience 150 (Typ 2422) und 250 (Typ 2424) Außenfilter. |
![]() |
EHEIM thermocontrol Aquarium Heater User Manual Official user manual for the EHEIM thermocontrol adjustable aquarium heater (25-300W). This guide covers installation, operation, safety, and technical specifications to ensure optimal and stable water temperatures for your aquarium's aquatic life. |
![]() |
EHEIM professionalel 4 Aquarium Außenfilter Bedienungsanleitung Umfassende Bedienungsanleitung für die EHEIM professionalel 4 Serie von Außenfiltern für Aquarien, Modelle 800 (Typ 2277) und 600 T (Typ 2375). Nwụnye, Betrieb, Wartung na Fehlerbehebung. |
![]() |
EHEIM LEDcontrol+ 4200140: Präzise Aquarienbeleuchtungssteuerung Entdecken Sie das EHEIM LEDcontrol+ (Modell 4200140), ein fortschrittliches Steuergerät zur individuellen Programmierung von Lichtfarbe na Helligkeit Ihrer Aquarienbeleuchtung. Ideal für EHEIM powerLED+ Leuchten. |
![]() |
Igwe njikwa ọkụ EHEIM: Bedienungsanleitung für Aquarium-Reglerheizer Umfassende Bedienungsanleitung für die EHEIM thermocontrole Serie von Aquarium-Reglerheizern (Modelle 3631-3640), die echichi, sicheren Betrieb und Wartung abdeckt. |
![]() |
EHEIM pHcontrol+e Aquarium pH-Controller: Bedienungsanleitung & Setup Die offizielle Bedienungsanleitung für den EHEIM pHcontrol+e pH-Controller. Erfahren Sie, wie Sie Ihren Aquarium-pH-Wert mit WiFi-Steuerung optimal regulieren und CO2-Level kontrollieren. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.





