Winco Analog Receiving Scale SCAL-820 Instruction Manual

Melite

1. Iwepu: Carefully remove the scale from its packaging. Inspect for any shipping damage.
2. Nkwanye: Place the scale on a stable, flat, and level surface to ensure accurate readings. Avoid placing it near vibrations or drafts.
3. Wepụ nkwakọ ngwaahịa nchekwa: Locate and remove any internal corrugated cylinders or protective materials that may be securing the weighing mechanism during transit. These are typically found beneath the weighing platform.
4. Idobe nha nha: Before first use and periodically thereafter, ensure the scale reads zero when nothing is on the platform. If the needle is not at zero, gently turn the calibration knob, usually located at the bottom front or side of the dial, until the needle aligns with the '0' mark.

Foto: nkọwa zuru ezu view of the scale's weighing platform attachment, highlighting the robust construction and connection points. This area should be checked for any protective packaging during initial setup.

Ntuziaka ọrụ

1. Prepare for Weighing: Ensure the scale is on a stable surface and the dial is set to zero. Adjust the zeroing knob if necessary.
2. Ihe ebe: Gently place the item to be weighed onto the center of the stainless steel platform.
3. Gụọ nha: Observe the red needle on the dial. The outer ring indicates weight in pounds (lbs), and the inner ring indicates weight in kilograms (kg). The scale features graduations of 1 ounce (50g) for precise readings.
4. Wepu ihe: Once the weight is recorded, carefully remove the item from the platform.
5. Tare Function (Manual): To weigh multiple ingredients in the same container, place the empty container on the platform, then turn the zeroing knob to reset the needle to zero. Add the first ingredient, record its weight, then reset to zero again before adding the next ingredient.

Image: A close-up of the scale's analog dial, clearly showing the measurement markings for pounds (outer ring) and kilograms (inner ring), along with the red indicator needle. The Winco logo is visible at the bottom of the dial.

Nlekọta

• Nhicha: The stainless steel platform can be removed and is dishwasher safe for easy cleaning. The main body of the scale should be wiped clean with a damp cloth and mild detergent. Avoid submerging the entire scale in water.
• Nchekwa: Store the scale in a dry, clean environment.
• Nyocha: Periodically check the scale for any signs of wear or damage. Ensure the platform is securely attached and the dial moves freely.

Nchọpụta nsogbu

Nkọwapụta

• Akara: Winco
• Ụdị: SCAL-820
• Ụdị ngosi: Analọg
• Oke ibu: 20 Pound (9 Kilogram)
• Ịgụ izi ezi: 1 ounce (50g)
• Ihe: Igwe anaghị agba nchara
• Agba: White, Steel
• Njirimara Pụrụ Iche: Dishwasher Safe (Platform)
• Ibu ihe: 6.3 pound
• Ngwa gụnyere: Ọnụ ọgụgụ
• UPC: 842169122533

Akwụkwọ ikike na nkwado

For warranty information or technical support regarding your Winco Analog Receiving Scale SCAL-820, please refer to the documentation included with your purchase or visit the official Winco website. You may also contact Winco customer service directly for assistance with product inquiries, parts, or service.

Onye nrụpụta: Winco USA

Kpọtụrụ: Biko gaa leta wincous.com maka nkọwa kọntaktị na akụrụngwa nkwado.