Sloan ETF-735-A Splash Proof Junction Box Instruction Manual

1. Ngwaahịa gafereview

The Sloan ETF-735-A is a splash-proof junction box and 6 VDC control module designed as a replacement part for Sloan Optima EBF style sensor faucets. This module is essential for the proper functioning of the faucet's sensor, allowing for adjustments to the sensor range and timeout settings via internal dip switches and a range potentiometer.

Foto 1.1: N'ihu view of the Sloan ETF-735-A Splash Proof Junction Box.

2. Atụmatụ igodo

• Ngosipụta ihe ngosi: Engineered to resist splashes, ensuring durability in commercial restroom environments.
• 6 VDC Control Module: Provides reliable power and control for sensor faucet operations.
• Ntọala nwere ike idozi: Features internal dip switches and a range potentiometer for customizing sensor range and timeout.
• OEM Replacement Part: Ensures compatibility and optimal performance with Sloan Optima EBF faucets.

3. Nwụnye

Installation of the ETF-735-A junction box should be performed by a qualified professional to ensure proper function and compliance with local codes. This module is specifically designed for use with Sloan Optima EBF sensor faucets.

1. Nchekwa Mbụ: Before beginning installation, ensure the water supply to the faucet is turned off and the power supply to the existing control module is disconnected.
2. Access Existing Module: Locate and carefully open the housing of the existing control module.
3. Kwụpụ waya: Disconnect all wiring from the old control module, noting the connections for reinstallation.
4. Wụnye modul ọhụrụ: Connect the new ETF-735-A module following the manufacturer's wiring diagram for your specific Sloan Optima EBF faucet model.
5. Modul echedoro: Place the new module securely within its designated location.
6. Weghachite ike na mmiri: Once all connections are secure and the module is properly housed, restore power and water supply.

Image 3.1: The ETF-735-A module opened, revealing the circuit board and battery compartment.

4. Ntuziaka ọrụ

The ETF-735-A control module manages the sensor functionality of your Sloan Optima EBF faucet. After installation, you may need to adjust the sensor's range and timeout settings to suit the specific environment.

1. Ntọala nnweta: Carefully open the splash-proof housing of the ETF-735-A module.
2. Adjust Sensor Range: Locate the range potentiometer (often a small blue or white dial) on the circuit board. Use a small screwdriver to turn the potentiometer clockwise to increase the sensor range or counter-clockwise to decrease it. Test the range after each adjustment.
3. Adjust Timeout Settings: Identify the dip switches on the circuit board. Refer to your specific faucet's documentation for the correct dip switch configurations to adjust the timeout duration (how long the water flows after the sensor is no longer active).
4. Mechie Ụlọ: Once adjustments are complete, ensure the housing is securely closed to maintain its splash-proof integrity.

Foto 4.1: Zuru ezu view of the control module's circuit board, highlighting the range potentiometer and dip switches for adjustment.

5. Nlekọta

To ensure the longevity and optimal performance of your Sloan ETF-735-A control module and connected faucet, follow these maintenance guidelines:

• Nyocha oge niile: Periodically inspect the module and its connections for any signs of wear, damage, or moisture intrusion.
• Ngbanwe batrị: If your faucet is battery-powered, replace batteries as needed. Refer to your faucet's manual for battery type and replacement frequency.
• Jiri ezigbo akụkụ: For any repairs or replacements, always use Sloan Genuine Parts to maintain product integrity and warranty.
• Debe Ọcha: Ensure the exterior of the junction box is kept clean and free from debris that could compromise its splash-proof seal.

6. Nchọpụta nsogbu

If you experience issues with your Sloan Optima EBF faucet after installing the ETF-735-A module, consider the following common troubleshooting steps:

• Enweghị Mgbasa Mmiri:
  • Check power supply to the module.
  • Verify water supply is turned on.
  • Inspect all wiring connections for security.
• Continuous Water Flow:
  • Check sensor range settings; it might be too sensitive.
  • Ensure no obstructions are in the sensor's field of view.
• Ọrụ na-adịte aka:
  • Lelee maka njikọ adịghị mma.
  • Verify battery strength if applicable.
  • Ensure the sensor lens is clean.

For persistent issues, contact Sloan technical support or a qualified plumbing professional.

7. Nkọwapụta

8. Official Product Video

9. Akwụkwọ ikike na nkwado

Sloan products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your original Sloan faucet or visit the official Sloan websaịtị.

For technical assistance, troubleshooting beyond this manual, or to inquire about genuine replacement parts, please contact Sloan customer support. Contact information can typically be found on the Sloan websaịtị ma ọ bụ na nkwakọ ngwaahịa.

Using non-genuine parts may void your product warranty and could lead to improper operation or damage.