STANLEY FATMAX 1-95-152 Aluminium Torch User Manual

Okwu mmalite

This manual provides essential instructions for the safe and effective use, setup, and maintenance of your STANLEY FATMAX 1-95-152 Aluminium Torch. Please read this manual thoroughly before operating the device and retain it for future reference.

Ozi nchekwa

• Elela anya ozugbo n'ime ọkụ ikanam.
• Debe ebe ụmụaka na-apụghị iru.
• Ejikọtala batrị ochie na nke ọhụrụ, ma ọ bụ ụdị batrị dị iche iche.
• Remove batteries if the torch will not be used for an extended period.
• Tụfuo batrị dịka iwu mpaghara siri dị.
• Do not attempt to disassemble or modify the torch.

Ihe ngwugwu

• STANLEY FATMAX Aluminium Torch
• Requires 3 x AAA Alkaline Batteries (not included)

Melite

Ntinye batrị

1. Unscrew the tail cap of the torch by turning it counter-clockwise.
2. Insert three (3) AAA alkaline batteries into the battery holder, ensuring correct polarity (+/-).
3. Place the battery holder with the installed batteries into the torch body.
4. Screw the tail cap back on clockwise until securely tightened.

Ntuziaka ọrụ

Na-agbanye/ Gbanyụọ

Press the button located on the tail cap to turn the torch on. Press the button again to turn the torch off.

Na-edozi Beam

The head of the torch can be rotated to adjust the focus of the light beam. Rotate the head clockwise or counter-clockwise to achieve a wider floodlight or a more focused spotlight.

Nlekọta

Nhicha

Wipe the torch body with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the lens is clean for optimal light output.

Ngbanwe batrị

When the light output diminishes, replace the AAA batteries following the installation steps in the "Setup" section. Always replace all three batteries at the same time with new, fresh alkaline batteries.

Nchekwa

Store the torch in a cool, dry place. If storing for an extended period, remove the batteries to prevent leakage and potential damage to the torch.

Nchọpụta nsogbu

• Torch does not turn on:
  • Lelee ma etinyere batrị nke ọma yana polarity kwesịrị ekwesị.
  • Ensure batteries are fresh and not depleted.
  • Verify the tail cap is securely tightened.
• Ìhè na-ada ada ma ọ bụ na-egbuke egbuke:
  • Jiri ndị ọhụrụ dochie batrị.
  • Hichaa kọntaktị batrị na ọnụ.
  • Gbaa mbọ hụ na oghere ahụ dị ọcha.
• Beam adjustment is stiff:
  • Gently clean any debris from the head mechanism.
  • Avoid forcing the adjustment.

Nkọwapụta

Akwụkwọ ikike na nkwado

For warranty information or technical support, please refer to the official STANLEY FATMAX websaịtị ma ọ bụ kpọtụrụ ngalaba ọrụ ndị ahịa ha. Debe nnata nzụta gị ka ihe akaebe nke ịzụrụ.