Karịa naanị ike.™
ACM220 usoro
Nweta ndị njikwa ike
na akụrụngwa ike
Elsdị gụnyere:
AL400ACM220
- 12VDC @ 4A ma ọ bụ 24VDC @ 3A.
– Mmepụta agwakọtara
AL600ACM220
- 12VDC ma ọ bụ 24VDC @ 6A.
– Mmepụta agwakọtara
AL1012ACM220
- 12VDC @ 10A.
– Mmepụta agwakọtara
AL1024ACM220
- 24VDC @ 10A.
– Mmepụta agwakọtara
Maka ebe mgbaba na-acha uhie uhie tinye mgbakwunye “R” na akụkụ #, dịka AL1024ACMR220
Ntuziaka nwụnye
Mkpu 010213
Ụlọ ọrụ wụnye: _______________ Onye nnọchite anya ọrụ: ___________________
Adreesị: ___________________ Ekwentị #: __________________
gafereview:
Nkeji Altronix ACM220 na-ekesa ma gbanwee ike iji nweta sistemụ njikwa na ngwa. Ha na-atụgharị 220VAC aha aha (ụdị ọrụ 198VAC - 256VAC), ntinye 50/60Hz n'ime asatọ (8) na-achịkwa n'onwe ya 12VDCor 24VDC fuse-fiusi. Enwere ike ịtụgharị nsonaazụ ike ndị a ka ọ bụrụ kọntaktị “C” nke kpọrọ nkụ. A na-arụ ọrụ mmepụta site na sink onye na-anakọta oghe ma ọ bụ na-emepekarị (NO) ntinye mkpata akọrọ sitere na Sistemụ Njikwa Nweta, Kaadị Reader, Keypad, Push Button, PIR, wdg. nkeji ga-ebufe ike gaa na ngwaọrụ ngwaike njikwa ohere dị iche iche gụnyere:
MagLocks, Electric Strikes, Magnetic Door Holders, wdg. Mpụta ga-arụ ọrụ na ma Fail-Safe na/ma ọ bụ ọdịda-nchekwa ụdịdị. Interface FACP na-enyere mgbapụ ihe mberede, na nlekota mkpu, ma ọ bụ enwere ike iji kpalite ngwaọrụ inyeaka ndị ọzọ. A na-ahọrọ njirimara nkwụsị ọkụ ọkụ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke asatọ (8).
Chart ntụaka usoro nhazi nhazi ACM220:
| AltronixNlereanya Nọmba |
12VDC Mkpokọta mpụta ugbu a |
24VDC Mkpokọta mpụta ugbu a |
Mmepụta agwakọtara | Ngosipụta ihe n'otu n'otu | 220VAC 50/60H Ntinye Ihe osise dị ugbu a |
Board na-enye ike Ntinye Fiasiti Rating |
Board na-enye ike |
| AL400ACM220 | 4A | 3A | 8 | 3.5A | 1.2A | 5A/250V | 15A/32V |
| AL600ACM220 | 6A | 6A | 1.5A | - | |||
| AL1012ACM220 | 10A | - | 2.2A | 15A/32V | |||
| AL1024ACM220 | - | 10A | 3A |
Nkọwapụta:
Ntinye:
- Nhọrọ ntinye ọkụ:
a) Otu (1) ntinye ike nkịtị maka ACM8 na ike mkpọchi (arụnyere ụlọ ọrụ).
b) Ntinye ike abụọ (2) dịpụrụ adịpụ - Otu (1) iji nye ike ACM8 na otu (1) maka ike ngwa mkpọchi (a na-achọrọ ike mpụga). A na-ekpebi ugbu a site na ọkụ ọkụ ejikọrọ, ọ gaghị agafe karịa mkpokọta 10A. - Ndenye Sistemụ Njikwa ohere ịnweta asatọ (8) na-akpalite ntinye.
Nhọrọ ntinye:
a) Ntinye asatọ (8) na-emeghekarị (NO).
b) Asato (8) ntinye ihe nchikota mepere emepe.
c) Ngwakọta ọ bụla nke dị n'elu.
Mpụta:
- 12VDC ma ọ bụ 24VDC mmepụta.
- Mpụta asatọ (8) na-achịkwa onwe ya.
Nhọrọ mmepụta:
a) asatọ (8) Mpụta ike nchekwa na/ma ọ bụ ọdịda-echekwabara.
b) Atọt (8) ụdị “C” 5A nke agbanyere nrịbaị agbagharị
c) Ngwakọta ọ bụla nke dị n'elu. - Mpụta ike inyeaka asatọ (8) anaghị agbanwe
- A na-atụle fiusi mmepụta @ 3.5A.
- Mwepụta a na-ahazi na nke eletrọnịkị (ọkụ ọkụ arụnyere n'ime ya).
Ihe ngosi onyonyo:
- Igwe ọkụ na-acha uhie uhie na-egosi na a na-ebute mpụta (relays ume).
- Green LED na-egosi nkwụpu FACP kpalitere.
- Ntinye AC na ihe ngosi LED nke DC.
Ndabere batrị:
- Chaja arụnyere maka batrị lead acid ma ọ bụ ụdị gel nwere akara.
- AL400XB2V, AL600XB220, na AL1012XB220 (Power Supply Board) kacha ụgwọ ugbu a 0.7A.
AL1024XB2V (Power Supply Board) kacha ụgwọ ugbu a 3.6A. - Gbanwee akpaaka ka batrị nọrọ na-echere mgbe AC dara.
- Ntinye AC na ihe ngosi LED nke DC.
- Zero voltage dobe mgbe unit ahụ gafere na ndabere batrị (ọnọdụ ọdịda AC).
- Batrị na-ada na nlekọta ọnụnọ batrị (ụdị kọntaktị "C").
Atụmatụ:
- Ịkwụsị Mkpọ oku ọkụ (latching ma ọ bụ enweghị nkwụsị) bụ nke a na-ahọrọ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke asatọ (8).
- Nhọrọ ntinye mgbakwụnye ọkụ ọkụ:
a) Ntinye kọntaktị akọrọ nke na-emepe nke ọma (MENWEE) ma ọ bụ mechiri emechi (NC).
b) Ntinye ngbanwe polarity sitere na sekit mgbama FACP. - Mwepụta mpụta mkpu na-egosi na etinyere FACP ntinye (ụdị kọntaktị “C” nwere akara @ 1A 28VDC).
- Mkpirisi sekit na nchekwa oke ọkụ.
Akụkụ Mkpuchi (H x W x D ihe ruru): - 15.5" x 12" x 4.5"(393.7mm x 304.8mm x 114.3mm)
- Ihe mgbochi na-anabata batrị abụọ (2) 12AH.
Ntuziaka nwụnye:
Ụzọ wiwi ga-adị n'ụzọ kwekọrọ na National Electric Code/NFPA 70/NFPA 72/ANSI, yana koodu mpaghara na ndị ọchịchị niile nwere ikike. Ezubere ngwaahịa a maka naanị ime ụlọ.
- Wụnye unit ahụ n'ebe achọrọ. Kaa akara na prerill oghere n'ime mgbidi iji kwụ n'ahịrị n'ahịrị igodo abụọ dị n'elu n'ogige ahụ. Wụnye ihe nkedo abụọ dị elu na skru na mgbidi na isi ihe nkedo na-apụta. Tinye oghere igodo elu nke ogige ahụ n'elu skru abụọ dị elu, larịị, na nchekwa. Kaa akara ọnọdụ nke oghere abụọ dị ala. Wepu ihe mkpuchi ahụ. Gwuo oghere ndị dị ala ma wụnye ngwa ngwa atọ. Tinye oghere igodo elu nke ogige n'elu skru abụọ dị elu. Wụnye skru abụọ dị ala ma jide n'aka na ị ga-eme ka skru niile sie ike ( Akụkụ mkpuchi, pg. 12). Chekwaa ogige ahụ n'ala ụwa. A na-atụ aro ka ị buru ụzọ mee yaview Tebụl ndị a iji kwado nrụnye:
Mmepụta Voltage na Charts nkọwapụta kwụrụ ọtọ (pg. 3) Eserese ngwa a na-ahụkarị (pg. 6) Ikanam Nchọpụta (pg. 6) Tebụlụ njirimara njedebe (pg. 5) Eserese njikọ (pg. 8-9) - Tọọ mmepụta voltage:
AL400ACM220 na AL600ACM220: setịpụrụ mmepụta DC chọrọ voltage site na ịtọ ngbanwe SW1 gaa n'ọnọdụ kwesịrị ekwesị na bọọdụ ọkụ ọkụ. AL1012ACM220 bụ factory atọrọ na 12VDC na AL1024ACM220 bụ factory atọrọ na 24VDC (mmepụta Vol.tage na Charts nkọwapụta n'okpuru).
Mmepụta Voltage na Charts nkọwapụta kwụrụ ọtọ:
AL400ACM220
Voltage Gbanwee ọnọdụ Batrị echere 4 elekere. Njikere / 5 min. Oti mkpu 24 elekere. Njikere / 5 min. Oti mkpu
12VDC SW1 - GBANYE 40 AH 3.5A / 3.5A 1A / 3.5A 24VDC SW1 - Gbanyụọ 40 AH 2.75A / 2.75A 1A / 3A AL600ACM220
Voltage Gbanwee ọnọdụ Batrị echere 4 elekere. Njikere / 5 min. Oti mkpu 24 elekere. Njikere / 5 min. Oti mkpu
12VDC SW1 - GBANYE 40 AH 5.5A / 5.5A 0.5A / 5.5A 24VDC SW1 - Gbanyụọ 40 AH 5.75A / 5.75A 0.75A / 5.75A AL1012ACM220
Voltage Gbanwee ọnọdụ Batrị echere 4 elekere. Njikere / 5 min. Oti mkpu 24 elekere. Njikere / 5 min. Oti mkpu 12VDC N/A 40 AH 9.5A / 9.5A 0.5A / 9.5A AL1024ACM220 (tụ aka na AL1024ACM220 Akwụkwọ Mgbakọ Nha Batrị, pg. 10).
Voltage Batrị echere Nkeji 15 Njikere / 5 min. Oti mkpu 4 elekere. Njikere / 5 min. Oti mkpu 24 elekere. Njikere / 5 min. Oti mkpu 60 elekere. Njikere / 5 min. Oti mkpu 24VDC 12 AH 7.7A / 9.7A 1.2A / 9.7A - - 24VDC 65 AH - 7.7A / 9.7A 1.2A / 9.7A 200mA / 9.7A - Jikọọ AC (Fig. 2, pg. 7):
Jikọọ ike AC anaghị agbanwe (220VAC, 50/60Hz) na njedebe akara [L, N].
Jiri 14 AWG ma ọ bụ karịa maka njikọ ike niile. Ekwentị green waya na-eduga na lug ala.
Debe wiwi nwere oke ike iche na wiwi na-enweghị ike (220VAC, ntinye 50/60Hz,
Waya batrị). Ekwesịrị ịnye oghere kacha nta 0.25.
kpachara anya: Emetụla akụkụ ọla ndị ekpughere ekpughere aka. Mechie ike sekit alaka ụlọ ọrụ tupu ịwụnye ma ọ bụ na-arụ ọrụ. Enweghị akụkụ ndị ọrụ ga-arụ ọrụ n'ime. Tụtụ aka na nrụnye na ọrụ nye ndị ọrụ ruru eru. - Hụ voltage tupu jikọọ ngwaọrụ. Nke a na-enyere aka izere mmebi nwere ike ime.
- Nhọrọ mmepụta (Fig 1, pg. 6): Ngalaba ahụ ga-enye ma ọ bụ asatọ (8) ọkụ ọkụ gbanwere, asatọ (8) ụdị akọrọ "C" mmepụta, ma ọ bụ ihe ọ bụla nchikota nke ma gbanwee ike na ụdị "C", gbakwunyere asatọ. (8) mpụta ike inyeaka anaghị agbanwe.
(a) Mwepụta ike gbanwere: Jikọọ ntinye adịghị mma (-) nke ngwaọrụ a na-akwado na njedebe akara [COM]. Maka ịrụ ọrụ nchekwa nke Fail-Safe jikọọ ndenye dị mma (+) nke ngwaọrụ a na-akwado na njedebe akara [NC]. Maka ịrụ ọrụ nchekwa nke Fail-Secure jikọọ ndenye dị mma (+) nke ngwaọrụ a na-akwado na njedebe akara [NO].
(b) Ụdị “C” mpụta: Mgbe ụdị “C” na-achọ ka a ga-ewepụ fiusi mmepụta kwekọrọ (1-8). Jikọọ adịghị mma (-) nke ọkụ ọkụ ozugbo na ngwaọrụ mkpọchi. Jikọọ mma (+) nke ọkụ ọkụ na ọdụ akara akara [C]. Maka ịrụ ọrụ adịghị mma jikọọ mma (+) nke ngwaọrụ a na-agbanye na njedebe akara NC]. Maka ịrụ ọrụ nchekwa ọdịda, jikọọ mma (+) nke ngwaọrụ a na-agbanye na njedebe akara [NO].
(c) Mpụta ike inyeaka (anaghị agbanwe): Jikọọ ntinye dị mma (+) nke ngwaọrụ a na-agbanye na njedebe akara [C] na adịghị mma (-) nke ngwaọrụ a na-agbanye na njedebe akara [COM]. Enwere ike iji mmepụta nye ike maka ndị na-agụ kaadị, igodo, wdg. - Nhọrọ ntinye ntinye (Fig 1, pg. 6): (a) Na-emepekarị mkpalite [NO]: Ntinye 1-8 na-arụ ọrụ site na ntinye sink na-emeghe ma ọ bụ mepere emepe. Jikọọ ngwaọrụ (ndị na-agụ kaadị, ahụigodo, arịrịọ ka ịpụ bọtịnụ, wdg) na njedebe ndị akara [IN] na [GND]. (b) Mepee ihe ntinye Sink Collector: Jikọọ oghere njikwa oghere oghere onye na-anakọta sink positive (+) na ọdụ akara [IN] yana nke ọjọọ (-) na njedebe akara [GND].
- Nhọrọ Interface Oti mkpu (Figs 4 ruo 8, pg. 8): A na-emechikarị [NC], na-emepekarị ntinye [NO] ma ọ bụ ntinye ntụgharị polarity sitere na sekit mgbaàmà FACP ga-akpalite nsonaazụ ahọpụtara. Iji mee ka Kwụsị FACP maka mmepụta gbanyụọ mgba ọkụ kwekọrọ [SW1-SW8]. Iji gbanyụọ nkwụsị FACP maka mmepụta, gbanye mgba ọkụ kwekọrọ [SW1-SW8] GBANYE.
(a) Na-emepekarị ndenye [NO]: Maka nkpịsị na-adịghị ejikọta (Fig 5, pg. 8). Maka njide nko-elu hụ foto 6, pg. 9.
(b) Ntinye [NC] na-emechikarị: Maka nkpịsị na-adịghị ejikọta (Fig 7, pg. 9). Maka njide nko-elu hụ foto 8, pg. 9.
(c) Ihe nrịbama nke FACP na-akpalite ntinye sekit: Jikọọ ihe dị mma (+) na adịghị mma (-) site na mmepụta sekit mgbama FACP gaa na njedebe akara [+ INP -]. Jikọọ FACP EOL na njedebe akara [+ RET -] (a na-ezo aka na polarity na ọnọdụ mkpu). A ghaghị ịkpụcha jumper dị n'akụkụ TRG LED (Fig 1a, pg. 6). - FACP Dry form “C” mmepụta (Fig. 1a, pg. 6): Jikọọ ngwaọrụ achọrọ ka ọ kpalite site na mmepụta kọntaktị akọrọ na njedebe akara [NO] na [C] FACP maka mmepụta emepe emepe ma ọ bụ akara akara. NC] na [C] FACP maka mmepụta emechiri emechi.
- Njikọ batrị (Fig. 2, pg. 7): Maka ngwa njikwa nnweta batrị bụ nhọrọ. Ọ bụrụ na ejighị batrị, mfu nke AC ga-ebute mfu nke mmepụta voltage. Batrị ga-abụrịrị ụzọ acid ma ọ bụ gel ụdị. Jikọọ otu (1) 12VDC batrị na njedebe akara [+ BAT -] maka ọrụ 12VDC. Jiri batrị abụọ (2) 12VDC etinyere n'usoro maka ọrụ 24VDC.
- Ihe nrụpụta batrị na AC (Fig 2, pg. 7): Ọ chọrọ ijikọ ngwaọrụ mkpesa nsogbu nlekọta na ntinye akara [AC Fail, BAT FAIL] njikwa relay akara [NC, C, NO] na ngwaọrụ ngosi kwesịrị ekwesị. Jiri 22 AWG ruo 18 AWG maka AC ọdịda & obere/enweghị mkpesa batrị. Beechapụ “egbu oge AC” jumper ka ọ gbuo oge mkpesa maka awa 6. Mara: A tamper mgba ọkụ ga-arụnyere na jikọọ na ngwaọrụ ngosi kwesịrị ekwesị iji kọọ ọnọdụ nsogbu mgbe ọnụ ụzọ mkpuchi meghere.
- Ọtụtụ ntinye ọkụ ọkụ (Fig 1, pg. 6): Mgbe ị na-eji abụọ (2) ọkụ ọkụ jumpers J1 na J2 (nke dị n'aka ekpe nke ike / njikwa) ga-ebipụ (Fig 1c, pg. 6 & Fig. 3 pg. Jikọọ ike maka ACM8 na njedebe akara [- Control +] wee jikọọ ike maka ngwaọrụ mkpọchi na njedebe akara [- Power +]. Mgbe ị na-eji DC ike ọkọnọ a ga-ahụ polarity. Mgbe ị na-eji AC ike ọkọnọ mkpa ka a hụrụ polarity (Fig. 8d, pg. 1).
Nlekọta:
A ga-anwale nkeji opekata mpe otu ugboro n'afọ maka ịrụ ọrụ kwesịrị ekwesị dịka ndị a:
Mmepụta Voltage nwale: N'okpuru ọnọdụ ibu nkịtị, mmepụta DC voltage kwesịrị ịlele nke ọma voltage larịị (Mpụta Voltage na Charts nkọwapụta guzoro, pg. 3).
Nnwale batrị: N'okpuru ibu nkịtị, ọnọdụ lelee na chajịrị batrị nke ọma, lelee voltaji akọwapụtaratage na ọdụ batrị yana na bọọdụ akara akara [+ BAT -] iji hụ na enweghị nkwụsịtụ na wires njikọ batrị.
Mara: AL400XB2V, AL600XB220, AL1012XB220 (Power Supply Board) kacha ụgwọ ugbu a bụ 0.7A.
AL1024XB2V (Power Supply Board) kacha ụgwọ ugbu a bụ 3.6A.
Ndụ batrị a na-atụ anya ya bụ afọ 5, Otú ọ dị, a na-atụ aro ka ịgbanwee batrị n'ime afọ 4 ma ọ bụ obere ma ọ bụrụ na ọ dị mkpa.
Tebụlụ njirimara njedebe:
Board na-enye ike
| Akụkọ Mgbe Ebighị Ebi |
Ọrụ/Nkọwa |
| L, N | Jikọọ 220VAC, 50/60Hz na njedebe ndị a: L na-ekpo ọkụ, N na-anọpụ iche. |
| + DC - | AL400ACM220 - 12VDC @ 4A ma ọ bụ 24VDC @ 3A gaa na bọọdụ ACM8. AL600ACM220 - 12VDC/24VDC @ 6A ruo ACM8 bọọdụ. AL1012ACM220 - 12VDC @ 10A na bọọdụ ACM8. AL1024ACM220 - 24VDC @ 10A ruo bọọdụ ACM8. |
| AC FAIL NC, C, NO | A na-eji iji gosi mfu nke ike AC, dịka ọmụmaatụ jikọọ na ngwaọrụ a na-anụ ma ọ bụ ogwe mkpu. A na-enyekarị ọkụ ọkụ mgbe ike AC dị. Ogo kọntaktị 1A @ 28VDC. A na-akọ AC ma ọ bụ brownout ọdịda n'ime nkeji 1 nke mmemme ahụ. Ka igbu oge mkpesa ruru elekere 6. bechapụ “AC igbu oge” jumper ma tọgharịa ike na unit. |
| BAT FAIL NC, C, NO | A na-eji egosi ọnọdụ batrị dị ala, dịka ọmụmaatụ jikọọ na panel mkpu. A na-enyekarị ọkụ ọkụ mgbe ike DC dị. Ogo kọntaktị 1A @ 28VDC. A na-akọ batrị ewepụrụ n'ime nkeji ise. A na-akọ njikọghachi batrị n'ime nkeji 5. Ọkwa batrị dị ala: 12VDC mmepụta tereshold setịpụrụ @ odika 10.5VDC (N/A maka AL1024ACM220), 24VDC mmepụta tereshold setịpụrụ @ odika 21VDC (N/A maka AL1012ACM220). |
| + BAT - | Njikọ batrị kwụrụ ọtọ. AL400XB2V, AL600XB220, na AL1012XB220 (Power Supply Board) kacha ụgwọ ugbu a bụ 0.7A. AL1024XB2V (Power Supply Board) kacha ụgwọ ugbu a bụ 3.6A. |
ACM8 njikwa ike nnweta
|
Akụkọ Mgbe Ebighị Ebi |
Ọrụ/Nkọwa |
| – Ike + | Ntinye 12VDC ma ọ bụ 24VDC sitere na bọọdụ ọkọnọ ike. |
| – Njikwa + | Enwere ike ijikọ ọnụ ọnụ ndị a na ọkụ dị iche iji nye ike arụ ọrụ dịpụrụ adịpụ maka ACM8 (a ga-ewepụrịrị jumpers na J2). |
| IHE NDỊ MMADỤ 1 – NTỤTA 8 IN, GND | Site na ntinye na-emepe emepe na/ma ọ bụ meghee ihe ntinye mmiri na-emepe emepe (rịọ ka ịpụ bọtịnụ, pụọ na Pirs, wdg). |
| Mpụta 1 - Mbupute 8 NC, C, NO, COM |
12 ruo 24 volts AC/DC na-ebute nsonaazụ a na-achịkwa: Ọdịda-Safe [NC positive (+) & COM Negative (-)], Fail-Secure [NO positive (+) & COM Negative (-)], mmepụta inyeaka [C positive (+) & COM Negative (-)]( Mgbe ị na-eji AC ike ọkọnọ polarity mkpa ka a hụrụ), NC, C, NO na-aghọ ụdị “C” 5A 24VAC/VDC gosiri akọrọ mmepụta mgbe fuses na-ewepụ. Egosiri kọntaktị na steeti anaghị akpalite. |
| FACP INTERFACE T, + INPUT – | Ọkụ mkpu Interface na-akpalite ntinye sitere na FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị ya site na sekit mmepụta FACP (Fig 4 ruo 8, pg. 8-9). |
| FACP INTERFACE NC, C, NO | Ụdị kọntaktị relay “C” nwere akara @ 1A 28VDC maka mkpesa mkpu. |
Eserese ngwa a na-ahụkarị:
Ihe nchọpụta LED:
Board na-enye ike
|
Ikanam |
Ọkwa inye ike |
|
| Uhie (DC) | Green (AC) | |
| ON | ON | Ọnọdụ ọrụ nkịtị. |
| ON | Gbanyụọ | Mfu nke AC. Ike inye batrị guzoro ọtọ. |
| Gbanyụọ | ON | Enweghị mmepụta DC. Mkpirisi sekit ma ọ bụ ọnọdụ ebufe ọkụ. |
| Gbanyụọ | Gbanyụọ | Enweghị mmepụta DC. |
ACM8 njikwa ike nnweta
|
Ikanam |
ON |
Gbanyụọ |
| Ikanam 1-Ikanam 8 (Uhie) | Mbupute relay (s) na-enye ike. | Mgbasa ozi (s) arụpụtaghị ike. |
| Trg (Green) | Ntinye FACP kpalitere (ọnọdụ mkpu). | FACP nkịtị (ọnọdụ enweghị mkpu). |
Fig. 2 - ACM220 Usoro nhazi
kpachara anya: Wepụ nkeji ike tupu ị rụọ ọrụ.
Maka nchebe na-aga n'ihu megide ihe egwu ọkụ, dochie fiusi ahụ na otu ụdị na ọkwa.
kpachara anya: Nhọrọ batrị nkwụnye ụgwọ ga-adabarịrị na mmepụta ọkụ ọkụ voltage ntọala.
Debe wiwi nwere oke ike na enweghị oke. Jiri ohere kacha nta 0.25 inch.
Eserese Nkọ:
Fig. 3 Nkonye nhọrọ na-eji ntinye ọkụ abụọ (2) dịpụrụ adịpụ:
Eserese Nkọ:
Fig. 6 Mepee ngwa FACP Latching mkpalite yana ntọgharị (UL enyochabeghị mmepụta a):
AL1024ACM220 Akwụkwọ Mgbakọ nha batrị:
| A. AL1024ACM220 oriri dị ugbu a B. Ibu ibu oriri ugbu a C. Achọrọ oge echere (awa) D. Ike batrị achọrọ maka njikere E. AL1024ACM220 oriri ike n'ime F. Ibu ihe oriri ugbu a G. Ogologo oge mkpu (awa, example: 15 min. = 0.25 awa) H. Ike batrị achọrọ maka Mkpu I. Ngụkọta ikike batrị gbakọrọ J. Ike batrị achọrọ |
(kwụrụ n'ụsọ) (kwụrụ n'ụsọ) (A+B)*C (Oti mkpu) (Oti mkpu) (Oti mkpu) (E+F)*G D+H I*1.8 (ihe nchekwa) |
__________ 0.35A ________ A __________ H __________ AH __________ 0.35A ________ A __________ H __________ AH __________ AH __________ AH |
Mara: Ezubere ọkụ ọkụ AL1024ACM220 ka ọ rụọ ọrụ na batrị ruo 65AH. Biko mara, ahịrị ahụ [I] agaghị agafe 36AH. Ị ga-ebelata ma nọrọ na njikere oriri ugbu a ma ọ bụ n'oge nọrọ na njikere iji na-agbaso ihe achọrọ.
Iji chọpụta nha batrị n'ezie, biko gbachie ahịrị [J] ka ogo batrị kacha nso kacha nso.
Akụkụ Mkpuchi (H x W x D ihe ruru):
15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm)
Altronix abụghị maka mmejọ ederede ọ bụla.
140 58th Street, Brooklyn, New York 11220 USA
ekwentị: 718-567-8181
faksị: 718-567-9056
websaịtị: www.altronix.com
ozi-e: info@altronix.com
Akwụkwọ ikike ndụ
Usoro IIACM220
Ndị otu F25U
Ntuziaka nwụnye ACM220 Series
Akwụkwọ / akụrụngwa
 |
Altronix ACM220 Series Access Power Controllers with Power Supply [pdf] Ntuziaka nwụnye ACM220 Series Access Controllers Power Power, ACM220 Series, Access Controllers with Power Eke, Ebunye Ike, Nweta ikike nchịkwa. |
